Effects of Crystallinity on the Photocatalytic Polymerization of 3,4-Ethylenedioxythiophene over CsPbBr3 Inverse Opals

Due to their high absorption coefficient and long carrier lifetime, halide perovskites are promising candidates for photocatalysts. For this study, the antisolvent crystallization protocol and the colloidal crystal templating approach were combined to fabricate the highly crystalline cesium lead bromide perovskite with inverse opal morphology (IO-CsPbBr3). Scanning electron microscopy and transmission electron microscope images demonstrate the three-dimensional well-ordered porous structures of the IO-CsPbBr3 and their single-crystalline features. The presented approach not only provides hierarchical porous structures but also enhances overall crystallinity. When used as catalysts to promote the polymerization of 2,2′,5′,2″-ter-3,4-ethylenedioxythiophene, the highly crystalline IO-CsPbBr3 exhibits a superior photocatalytic performance compared to its polycrystalline counterpart. Furthermore, the morphology and the crystalline structure of the highly crystalline IO-CsPbBr3 are well preserved under photocatalytic conditions. This novel approach enables the preparation of a halide perovskite inverse opal with high crystallinity.

Self-templating construction of mesopores on three-dimensionally ordered macroporous La0.5Sr0.5MnO3 perovskite with enhanced performance for soot combustion

A three-dimensionally ordered macroporous (3DOM) La0.5Sr0.5MnO3 perovskite was prepared by a colloidal crystal templating method, with extra mesopores created by selective dissolution method performed successively.

Preparation of inverse opal zirconia

Inverse opal zirconia is useful in many ways because of their ability to combine several chemical and physical properties. In this research, polystyrene template was fabricated by self-assembly method and inverse opal zirconia was prepared by colloidal crystal-templating method. The process of preparation of inverse opal zirconia as well as effects on morphology and phase of as-prepared inverse opal zirconia were studied. The results showed precursor ratio of zirconium acetate and methanol, mass ratio of polystyrene templates and precursor and dipping times had remarkable influence on morphology of inverse opal zirconia. When the precursor ratio was 1:1; the mass ratio was 1:15 and dipped once, much better morphology of inverse opal zirconia was obtained. The mass ratio, sintering temperature and holding time had significant effect on crystallization of zirconia. Pure phase zirconia could be obtained when sintered at 600 oC, holding time was 2h and the mass ratio was 1:1. A distinguished single stop band in the visible region of the spectrum and unique structural color were observed in inverse opal zirconia, which will make this material promising candidate for novel pigment.