Triacrylamide-Based Adhesives Stabilize Bonds in Physiologic Conditions

In this study, an acrylamide-based adhesive was combined with a thiourethane-based composite to improve bond stability and reduce polymerization stress, respectively, of simulated composite restorations. The stability testing was conducted under physiologic conditions, combining mechanical and bacterial challenges. Urethane dimethacrylate was combined with a newly synthesized triacrylamide (TMAAEA) or HEMA (2-hydroxyethyl-methacrylate; control) to produce a 2-step total-etch adhesive system. Methacrylate-based composites (70 wt% silanized filler) were formulated, containing thiourethane oligomers at 0 (control) or 20 wt%. Standardized preparations in human third molars were restored; then, epoxy replicas were obtained from the occlusal surfaces before and after 7-d storage in water or with Streptococcus mutans biofilm, which was tested after storage in an incubator (static) or the bioreactor (mechanical challenge). Images were obtained from the replicas (scanning electron microscopy) and cross sections of the samples (confocal laser scanning microscopy) and then analyzed to obtain measurements of gap, bacterial infiltration, and demineralization. Microtensile bond strength of specimens stored in water or biofilm was assessed in 1-mm2 stick specimens. Data were analyzed with analysis of variance and Tukey’s test (α = 0.05). HEMA-based materials had greater initial gap measurements, indicating more efficient bonding for the acrylamide materials. When tested in water, the triacrylamide-based adhesive had smaller gaps in the incubator or bioreactor. In the presence of biofilm, there was less difference among materials, but the acrylamide/thiourethane combination led to statistically lower gap formation in the bioreactor. HEMA and TMAAEA-based adhesives produced statistically similar microtensile bond strengths after being stored in water for 7 d, but after the same period with biofilm-challenged specimens, the TMAAEA-based adhesives were the only ones to retain the initial bond strength values. The use of a stable multiacrylamide-based adhesive led to the preservation of the resin-dentin bonded interface after a physiologically relevant challenge. Future studies will include a multispecies biofilm model.

Permissive aggregative group formation favors coexistence in yeast

ABSTRACTIn Saccharomyces cerevisiae, the FLO1 gene encodes flocculins that lead to formation of multicellular flocs, that offer protection to the constituent cells. Flo1p was found to preferentially bind to fellow cooperators compared to defectors lacking FLO1 expression, resulting in enrichment of cooperators within the flocs. Given this dual function in cooperation and kin recognition, FLO1 has been termed a ‘green beard gene’. Because of the heterophilic nature of Flo1p binding however, we hypothesize that kin recognition is permissive and depends on the relative stability of FLO1+/flo1− versus FLO1+/FLO1+ bonds, which itself can be dependent on environmental conditions and intrinsic cell properties. We combine single cell measurements of adhesion strengths, individual cell-based simulations of cluster formation and evolution, and in vitro flocculation experiments to study the impact of relative bond stability on defector exclusion as well as benefit and stability of cooperation. We hereto vary the relative bond stability by changing the shear flow rate and the inherent bond strength. We identify a marked trade-off between both aspects of the green beard mechanism, with reduced relative bond stability leading to increased kin recognition, but at the expense of decreased cluster sizes and benefit of cooperation. Most notably, we show that the selection of FLO1 cooperators is negative-frequency dependent, which we directly attribute to the permissive character of the Flo1p bond. Taking into account the costs associated to FLO1 expression, this asymmetric selection results in a broad range of ecological conditions where coexistence between cooperators and defectors is stable. Although the kin recognition aspect of the FLO1 ‘green beard gene’ is thus limited and condition dependent, the negative-frequency dependency of selection can conserve the diversity of flocculent and non-flocculent phenotypes ensuring flexibility towards variable selective pressures.

Photoredox-Catalyzed Reduction of Halogenated Arenes in Water by Amphiphilic Polymeric Nanoparticles

The use of organic photoredox catalysts provides new ways to perform metal-free reactions controlled by light. While these reactions are usually performed in organic media, the application of these catalysts at ambient temperatures in aqueous media is of considerable interest. We here compare the activity of two established organic photoredox catalysts, one based on 10-phenylphenothiazine (PTH) and one based on an acridinium dye (ACR), in the light-activated dehalogenation of aromatic halides in pure water. Both PTH and ACR were covalently attached to amphiphilic polymers that are designed to form polymeric nanoparticles with hydrodynamic diameter DH ranging between 5 and 11 nm in aqueous solution. Due to the hydrophobic side groups that furnish the interior of these nanoparticles after hydrophobic collapse, water-insoluble reagents can gather within the nanoparticles at high local catalyst and substrate concentrations. We evaluated six different amphiphilic polymeric nanoparticles to assess the effect of polymer length, catalyst loading and nature of the catalyst (PTH or ACR) in the dechlorination of a range of aromatic chlorides. In addition, we investigate the selectivity of both catalysts for reducing different types of aryl-halogen bonds present in one molecule, as well as the activity of the catalysts for C-C cross-coupling reactions. We find that all polymer-based catalysts show high activity for the reduction of electron-poor aromatic compounds. For electron-rich compounds, the ACR-based catalyst is more effective than PTH. In the selective dehalogenation reactions, the order of bond stability is C-Cl > C-Br > C-I irrespective of the catalyst applied. All in all, both water-compatible systems show good activity in water, with ACR-based catalysts being slightly more efficient for more resilient substrates.

Docking Studies and Molecular Dynamics Simulation of Compounds Contained in Kaempferia Galanga L. to Lipoxygenase (LOX) for Anti-Inflammatory Drugs

Inflammation is a self-protective response to start the healing process. An anti-inflammatory target worth developing are lipoxygenase inhibitors, which have been studied for several diseases, including severe respiratory disease. This research had the goals of estimating the activity of 21 compounds from K. galanga to inhibit the lipoxygenase (LOX) and estimating the bond stability of the ligand-LOX complex. Based on the compound’s affinity for LOX, the compounds in K. galanga were selected by utilizing the PLANTS docking software, with zileuton as the reference ligand. The GROMACS application was used to simulate the molecular dynamics of the LOX-ligand complex at 310 K. Based on the chemPLP score, most of the 21 K. galanga compounds showed a higher affinity towards 5-LOX compared to zileuton. δ-3-carene had the best affinity for 5-LOX. In the simulation of molecular dynamics until 20 ns, the RMSD of δ-3-carene and 5-LOX was not more than 0.03 nm or 0.3 Å, indicating that the whole system showed decent stability and had ‑1.67392 x 106 kcal/mol as the average potential energy. The results showed that K. galanga contains active components of 5-LOX inhibitors that could be developed.

Hydrogen bonding rearrangement by a mitochondrial disease mutation in cytochrome bc1 perturbs heme bH redox potential and spin state

Hemes are common elements of biological redox cofactor chains involved in rapid electron transfer. While the redox properties of hemes and the stability of the spin state are recognized as key determinants of their function, understanding the molecular basis of control of these properties is challenging. Here, benefiting from the effects of one mitochondrial disease–related point mutation in cytochrome b, we identify a dual role of hydrogen bonding (H-bond) to the propionate group of heme bH of cytochrome bc1, a common component of energy-conserving systems. We found that replacing conserved glycine with serine in the vicinity of heme bH caused stabilization of this bond, which not only increased the redox potential of the heme but also induced structural and energetic changes in interactions between Fe ion and axial histidine ligands. The latter led to a reversible spin conversion of the oxidized Fe from 1/2 to 5/2, an effect that potentially reduces the electron transfer rate between the heme and its redox partners. We thus propose that H-bond to the propionate group and heme-protein packing contribute to the fine-tuning of the redox potential of heme and maintaining its proper spin state. A subtle balance is needed between these two contributions: While increasing the H-bond stability raises the heme potential, the extent of increase must be limited to maintain the low spin and diamagnetic form of heme. This principle might apply to other native heme proteins and can be exploited in engineering of artificial heme-containing protein maquettes.