Synthesis, Characterization and Properties of Antibacterial Polyurethanes

Novel physically crosslinked polyurethane (PUII), based on isophorone diisocyanates, was prepared by a conventional two-step method. The chemical structures of the PUII were characterized by fourier transform infrared (FTIR), proton nuclear magnetic resonance (1H NMR), gel permeation chromatography (GPC), scanning electron microscopy (SEM) and DSC. The PUII hydrogels were subjected to solvent-induced self-assembly in THF + water to construct a variety of morphologies. The self-assembly morphology of the PUII was observed by scanning electron microscopy (SEM). The PUII films with different amounts (0.2%, 0.4%, 0.6%, 0.8%, 1.0%) of 1,3,5-Tris(2-hydroxyethyl)hexahydro-1,3,5-triazine (TNO) were challenged with Escherichia coli, Staphylococcus aureus, Bacillus subtilis and Gray mold. The results showed that when a small amount of antibacterial agent were added, the antibacterial effect of films on Botrytis cinerea was more obvious. The mechanical evaluation shows that the antimicrobial polyurethane films exhibit good mechanical properties.

Self-Powered Flexible Sensing System Based on Super-Tough, High Ionic Conductivity and Rapid Self-Recovery Fully Physically Crosslinked Double Network Hydrogel

At present, hydrogel flexible sensors have attracted wide attention in the field of wearable electronic devices. However, hydrogel flexible sensors need external solid state power supply to output stable signals....

Insight into Enzymatic Degradation of Physically Crosslinked Hydrogels Anchored by Functionalized Carbon Nanofillers

The effect of different geometries of functional carbon nanofillers has been studied to understand the nature of enzymatic degradation of physically crosslinked hydrogels. The noncovalent interactions between polymer and fillers...

Novel Tough and Transparent Ultra-Extensible Nanocomposite Elastomers Based on Poly(2-methoxyethylacrylate) and Their Switching between Plasto-Elasticity and Viscoelasticity

Novel stiff, tough, highly transparent and ultra-extensible self-assembled nanocomposite elastomers based on poly(2-methoxyethylacrylate) (polyMEA) were synthesized. The materials are physically crosslinked by small in-situ-formed silica nanospheres, sized 3–5 nm, which proved to be a very efficient macro-crosslinker in the self-assembled network architecture. Very high values of yield stress (2.3 MPa), tensile strength (3.0 MPa), and modulus (typically 10 MPa), were achieved in combination with ultra-extensibility: the stiffest sample was breaking at 1610% of elongation. Related nanocomposites doubly filled with nano-silica and clay nano-platelets were also prepared, which displayed interesting synergy effects of the fillers at some compositions. All the nanocomposites exhibit ‘plasto-elastic’ tensile behaviour in the ‘as prepared’ state: they display considerable energy absorption (and also ‘necking’ like plastics), but at the same time a large but not complete (50%) retraction of deformation. However, after the first large tensile deformation, the materials irreversibly switch to ‘real elastomeric’ tensile behaviour (with some creep). The initial ‘plasto-elastic’ stretching thus causes an internal rearrangement. The studied materials, which additionally are valuable due to their high transparency, could be of application interest as advanced structural materials in soft robotics, in implant technology, or in regenerative medicine. The presented study focuses on structure-property relationships, and on their effects on physical properties, especially on the complex tensile, elastic and viscoelastic behaviour of the polyMEA nanocomposites.

Near-Infrared Light-Responsive Shape Memory Polymer Fabricated from Reactive Melt Blending of Semicrystalline Maleated Polyolefin Elastomer and Polyaniline

A shape memory polymer was prepared by melt mixing a semicrystalline maleated polyolefin elastomer (mPOE) with a small amount of polyaniline (PANI) (up to 15 wt.%) in an internal mixer. Transmission electron microscopy (TEM), FTIR analysis, DMA, DSC, melt rheological analysis, and a tensile test were performed to characterize the structure and properties of the mPOE/PANI blends. The results revealed that the blends form a physically crosslinked network via the grafting of PANI onto the mPOE chains, and the PANI dispersed at the nanometer scale in the POE matrix served as a photo-thermal agent and provided increased crosslinking points. These structural features enabled the blends to exhibit a shape memory effect upon near-infrared (NIR) light irradiation. With increasing PANI content, the shape recovery rate of the blend under NIR stimulation was improved and reached 96% at 15 wt.% of PANI.