Liquid seal for compact micropiston actuation at the capillary tip

Actuators at the tip of a submillimetric catheter could facilitate in vivo interventional procedures at cellular scales by enabling tissue biopsy and manipulation or supporting active micro-optics. However, the dominance of frictional forces at this scale makes classical mechanism problematic. Here, we report the design of a microscale piston, with a maximum dimension of 150 μm, fabricated with two-photon lithography onto the tip of 140-μm-diameter capillaries. An oil drop method is used to create a seal between the piston and the cylinder that prevents any leakage below 185-mbar pressure difference while providing lubricated friction between moving parts. This piston generates forces that increase linearly with pressure up to 130 μN without breaking the liquid seal. The practical value of the design is demonstrated with its integration with a microgripper that can grasp, move, and release 50-μm microspheres. Such a mechanism opens the way to micrometer-size catheter actuation.

Micro-Surface and -Interfacial Tensions Measured Using the Micropipette Technique: Applications in Ultrasound-Microbubbles, Oil-Recovery, Lung-Surfactants, Nanoprecipitation, and Microfluidics

This review presents a series of measurements of the surface and interfacial tensions we have been able to make using the micropipette technique. These include: equilibrium tensions at the air-water surface and oil-water interface, as well as equilibrium and dynamic adsorption of water-soluble surfactants and water-insoluble and lipids. At its essence, the micropipette technique is one of capillary-action, glass-wetting, and applied pressure. A micropipette, as a parallel or tapered shaft, is mounted horizontally in a microchamber and viewed in an inverted microscope. When filled with air or oil, and inserted into an aqueous-filled chamber, the position of the surface or interface meniscus is controlled by applied micropipette pressure. The position and hence radius of curvature of the meniscus can be moved in a controlled fashion from dimensions associated with the capillary tip (~5–10 μm), to back down the micropipette that can taper out to 450 μm. All measurements are therefore actually made at the microscale. Following the Young–Laplace equation and geometry of the capillary, the surface or interfacial tension value is simply obtained from the radius of the meniscus in the tapered pipette and the applied pressure to keep it there. Motivated by Franklin’s early experiments that demonstrated molecularity and monolayer formation, we also give a brief potted-historical perspective that includes fundamental surfactancy driven by margarine, the first use of a micropipette to circuitously measure bilayer membrane tensions and free energies of formation, and its basis for revolutionising the study and applications of membrane ion-channels in Droplet Interface Bilayers. Finally, we give five examples of where our measurements have had an impact on applications in micro-surfaces and microfluidics, including gas microbubbles for ultrasound contrast; interfacial tensions for micro-oil droplets in oil recovery; surface tensions and tensions-in-the surface for natural and synthetic lung surfactants; interfacial tension in nanoprecipitation; and micro-surface tensions in microfluidics.

Fabrication of chitosan/PEO nanofiber mats with mica by electrospinning

Chitosan (CS) is an excellent biocompatible natural antibacterial material that has attracted researchers to study its biological applications as artificial tissue scaffolds and wound-healing materials. In this research, CS has been mixed with polyethylene oxide (PEO) and mica at various weight ratios to prepare nanofibers; however, it is found to be a difficult task to prepare the nanofiber using pure CS. The composite in form of nanofibrous mat was prepared with CS/PEO solution and CS/PEO/mica solution using electrospinning. Processing conditions were adjusted to a flow rate of 6 ml/min, with an applied voltage of 27 kV. The distance of capillary tip to target was kept about 10 cm at 25°C with a collector having a speed of 200 rpm. The spinnability of solutions was also evaluated by using both plate and cylinder collectors. The composite mats were analyzed in detail using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), thermogravimetric analysis, and X-ray diffractogram (XRD). SEM photomicrograms indicated that the morphology and diameter of the nanofibers were affected by weight ratio of CS/PEO, concentration of mica, and types of collector. Furthermore, mica was incorporated in the CS/PEO matrix to enhance the specific surface area. Molecular interactions between CS/PEO and mica were investigated using FTIR and XRD.