Progress in Advanced Properties of Electrowetting Displays

Electrowetting display (EWD) has promising prospects in the electronic paper industry due to it having superior characteristics, such as the ability to provide a comfortable reading experience and quick response. However, in real applications, there are also problems related to dielectric deterioration, excess power consumption, optical instability and narrow color gamut etc. This paper reviewed the existing challenges and recent progress made in terms of improving the optical performance and reliability of EWD. First, the principle of electrowetting applied in small and confined configurations is introduced and the cause of the failure of the dielectric layer is analyzed. Then, the function of the pixel structures is described to avoid display defects. Next, electric signal modulations are compared in terms of achieving good image quality and optical stability. Lastly, the methods are presented for color panel realization. It was concluded that multi-layer dielectrics, three-dimensional pixel structures, proper electric frequency-and-amplitude modulation and an RGB color panel are expected to resolve the current limitations and contribute to designing advanced reflective displays.

Various Coating Methodologies of WO3 According to the Purpose for Electrochromic Devices

Solution-processable electrochromic (EC) materials have been investigated widely for various applications, such as smart windows, reflective displays, and sensors. Among them, tungsten trioxide (WO3) is an attractive material because it can form a film via a solution process and relative low temperature treatment, which is suitable for a range of substrates. This paper introduces the slot-die and electrostatic force-assisted dispensing (EFAD) printing for solution-processable methods of WO3 film fabrication. The resulting films were compared with WO3 films prepared by spin coating. Both films exhibited a similar morphology and crystalline structure. Furthermore, three different processed WO3 film-based electrochromic devices (ECDs) were prepared and exhibited similar device behaviors. In addition, large area (100 cm2) and patterned ECDs were fabricated using slot-die and EFAD printing. Consequently, slot-die and EFAD printing can be used to commercialize WO3 based-ECDs applications, such as smart windows and reflective displays.

Synthesis and a Photo-Stability Study of Organic Dyes for Electro-Fluidic Display

Electro-fluidic display (EFD) is one of the most promising reflective displays because of its full color and video speed. Colored EFD oil, which normally consists of soluble organic dyes and non-polar solvent, plays a critical role in color, electro-optical behavior, and the reliability of the EFD devices. In this paper, we report our research on two kinds of electro-fluidic dyes based on anthraquinone and azo pyrazolone, including their synthesis, structure characterization, and application properties. Changes of absorbance curves, color coordinates of oils, and photoelectric responses of devices were studied in detail under accelerated irradiation to investigate the photo-stability and reliability properties of synthesized oil materials and devices. Photoelectric responses and photo stability of dyes are highly varied depending on their structures. We found that 1,4-dlialkylamino anthraqinone and mono azo pyrazolone dyes are much more stable than 1,8-dlialkylamino anthraqinone and corresponding bisazo pyrazolone dyes.

Novel perylene-based organic dyes for electro-fluidic displays

Electro-fluidic displays (EFDs) are one of the most promising reflective displays due to their full color and video speed.