Reducing Steaming Times in the Printing of Nylon/Elastane Blend Fabrics via Chemical Modification

Nylon fibres are commonly used in blends with elastane. One of the problems encountered in the printing of nylon/elastane blend fabrics is the necessity of long steaming times for fixation, which causes an increase in energy consumption. In this study, the possibility of printing polyamide fabrics with 1:2 metal complex dyes for short steaming times was investigated. For this aim, laboratory and sample scale trials were performed to develop a method of chemically modifying fibres so that polyamide fabrics can be printed in short steaming times. Based on the results obtained in both trials, it was noticed that the steaming time for fixation could be reduced from 30 minutes to 15 minutes by printing with 1:2 metal complex dyes without causing a loss of printing yield and without affecting the fastness adversly in case of applying cationisation pretreatment with a modified quaternary polyalkylamine compound based product.

Toxic Heavy Metal Ions and Metal-Complex Dyes Removal from Aqueous Solutions Using an Ion Exchanger and Titanium Dioxide

The aim of the study was to compare the removal efficiency of toxic heavy metal ions: chromium(VI), nickel(II) and copper(II) as well as metal-complex dyes from aqueous solution using Lewatite VPOC 1065 and AdsorbsiaTM As500. The point of zero charge (pHPZC) of both sorbents and the influence of the initial concentration on the sorption process of Ni(II), Cu(II), Cr(VI), C.I. Acid Red 183 (AR183), C.I. Reactive Blue 21 (RB21) and nickel(II) phthalocyanine-tetrasulfonic acid tetrasodium salt (NiPc-TSATSS) were studied to determine the maximum sorption capacity. Kinetic studies were also carried out for the most effective sorbent-sorbate systems. The concentration effect of both hydrochloric acid and auxiliaries on the removal yield was also taken into account. As was found, Lewatit VPOC 1065 can be successfully applied for the treatment of textile wastewaters containing metal complex dyes and heavy metal ions. The highest sorption capacity, qe = 816.1 mg/g, was found for C.I. Acid Red 183.

Effect on absorption and electron transfer by using Cd(ii) or Cu(ii) complexes with phenanthroline as auxiliary electron acceptors (A) in D–A–π–A motif sensitizers for dye-sensitized solar cells

Four new polymeric metal complex dyes (PBDTT-PhenCd, PBDTT-PhenCu, PPV-PhenCd and PPV-PhenCu) with donor–acceptor–π-bridge-acceptor (D–A–π–A) structure were designed and synthesized.