Effect of Minor Alloying Elements (C, Ni, Cr, Mo) on the Long-Term Corrosion Behaviors of Ultrahigh-Strength Automotive Steel Sheet in Neutral Aqueous Environment

This study examined the effects of minor alloying elements (C, Ni, Cr, and Mo) on the long-term corrosion behaviors of ultrahigh-strength automotive steel sheets with a tensile strength of more than 1800 MPa. A range of experimental and analytical results showed that the addition of Ni, Cr, and Mo decreased the corrosion current density and weight loss in electrochemical and immersion tests, respectively, in a neutral aqueous condition. This suggests that the minor addition of elements to steel can result in improved corrosion resistance even for long-term immersion periods. This is closely associated with the formation of thin and stable corrosion scale on the surface, which was enriched with the alloying elements (Ni, Cr, and Mo). On the other hand, their beneficial effects did not persist during the prolonged immersion periods in steel with a higher C content, suggesting that the beneficial effects of the minor addition of Ni, Cr, and Mo were overridden by the detrimental effects of a higher C content as the immersion time was increased. Based on these results, lower C and the optimal use of Ni, Cr, and Mo are suggested as a desirable alloy design strategy for developing ultrahigh-strength steel sheets that can be exposed frequently to a neutral aqueous environment.

Exploring New Strategies for Ultrahigh Strength Steel via Tailoring the Precipitates

Ultrahigh-strength (UHS) steels have shown great potential in the field of high-end equipment manufacturing in demand of lightweight engineering and performance upgrade. A significant research effort has been directed toward the development of advanced UHS steels with excellent combination of strength and toughness. In the course of development, tailoring precipitates by means of composition design and process optimization is absolutely a critical module. In this mini review, typical UHS steels strengthened by carbides and intermetallics are systematically summarized and discussed. With the increase of strength, the toughness losses of UHS steels strengthened by carbides and intermetallics have been compared in detail. In particular, the in-depth mechanisms leading to various strength/toughness variation trends have been discussed, extracting the bottleneck in developing new-generation UHS steels containing merely one type of precipitate. Meanwhile, prospects on designing advanced UHS steels strengthened by coexisting dispersive precipitates have been proposed to achieve better performance.

The metadynamic recrystallization behavior of ultrahigh-strength stainless steel: effects of precipitates and shear bands

The metadynamic recrystallization behavior of Cr-Co-Ni-Mo ultrahigh-strength martensitic stainless steel was studied in a double-pass isothermal compression test, and a metadynamic recrystallization kinetics model for softening was established. The results showed that the metadynamic recrystallization softening rate of the steel not only depended on the deformation temperature and strain rate but was also related to the dynamic precipitation and the local shear bands in the steel. When the deformation temperature was below 1050 °C, the dynamically precipitated M6C carbides pinned the grain boundaries and hindered metadynamic recrystallization. When the steel was deformed at a deformation temperature of 1000~1050 °C and a strain rate of 1.0~5.0 s-1, a large number of local shear bands were generated. The local shear bands increased the number of nucleation sites for dynamic recrystallization and enhanced the softening rate of metadynamic recrystallization.