An Assessment of the Functional and Ecological Aspect of Novel Intermittent Stream Valves for Spraying Seed Potatoes

It is important to protect potatoes from insects and diseases at an early stage of their development. Pesticides are necessary to prevent loss caused by Colorado potato beetles feeding on potato leaves. Nowadays, there are attempts to reduce the use of chemical agents to the minimum necessary level. This article describes the construction of a novel valve that applies chemicals in an intermittent stream during potato treatment. Thus, it is possible to reduce the emission of chemicals to the natural environment. The article also describes the research site where the valve was tested, provides the results of laboratory investigations on different types of sprayer nozzles and their validation. Apart from that, the degree of the seed potato surface covering with the dressing was assessed in order to select the right sprayer nozzle and working pressure. The results of field tests of the seed dresser prototype with novel nozzles showed that they effectively dressed seed potatoes while saving 2 L (50%) of the chemical per hectare. Fissure sprayers achieved the highest degree of covering (up to 78%) with the first version of the valve (without auxiliary airflow). When the innovative valve (the second solution with auxiliary airstream) was applied at a distance of 50 mm from the seed potato fall path S, the highest degree of coverage with the dressing substance (up to 88%) was observed for the ejector sprayer. When the distance between the valve and the seed potato fall, path S was increased from 50 to 100 mm, the degree of surface coverage was lower for both of the valves used in the tests.

APPLICATION HEIGHT IN HERBICIDES EFFICIENCY IN BEAN CROPS

ABSTRACTInadequate herbicide application can result in failures in weed control and/or poisoning of the crops, resulting in yield losses. In this research were assessed the effects of the sprayer nozzle boom height in the distribution of the spray solution for weed control, influencing intoxication of beans and crop yield. Experiments were conducted in laboratory and field conditions. In laboratory, the performance of flat spray tip TT 11002 was assessed at heights 0.20, 0.30, 0.40 and 0.50 meters with respect to the target surface. In the field the same heights were assessed in applications of herbicides fomesafen, fluazifop-P-butyl and fomesafen + fluazifop-P-butyl. There was an inverse relationship between the height of the spray boom and the coefficients of variation of the patterns. The mixture better efficiency in a tank of fluazifop-P-butyl + fomesafen was obtained with the height of 0.50 m from the target. This treatment resulted in better weed control, lower poisoning of the bean plants and better crop yield rates.

Experiment on Water Spraying Internal Cooling Within the Compressor of Gas Turbine

Experiment on internal cooling effect of water spraying within compressor of S1A-02 gas turbine plant is carried out. The experimental results are represented in this paper. The water spraying particle diameter and distribution are measured by Laser Beam Diffraction Method. In addition, the relationship of evaporative time of water particle with its diameter and relative humidity are discussed. The design and mechanism of compressed air blowing type water sprayer nozzle are also analyzed in this paper.