Electrocatalytic Degradation of Sulfameth Thiadiazole by GAC@Ni/Fe Three-Dimensional Particle Electrode

In this work, GAC@Ni/Fe particle electrodes were prepared and employed for the degradation of Sulfamethylthiadiazole (SMT) by three-dimensional electrocatalytic technology.The effects of particle electrode bi-metal loading ratio, cell voltage, particle electrode dosage, electrode plate spacing and SMT initial concentration on SMT removal were studied.In addition, GAC@Ni/Fe particle electrode was analyzed by the scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectrometer (XPS) and Fourier transform infrared spectrometer (FTIR) to characterize . which indicated that a significant amount of Iron-nickel oxide were formed on the surface of GAC@Ni/Fe particle electrode.The results indicated that when the nickel-iron loading ratio is 1:1, the SMT removal effect is the best, and the removal rate can reach 90.89% within 30 minutes,Compared with the granular activated carbon without bimetal, the removal efficiency is increased by 37.58%. The degradation of SMT in the GAC@Ni/Fe particle three-dimensional electrode reactor is the joint result of both direct oxidation and indirect oxidation. The contribution rates of direct oxidation of anode and particle electrode and indirect oxidation of ·OH in the degradation are 32%, 27% and 41%, respectively. Based on the intermediate detected by ultra high liquid chromatography and the calculation of bond energy of SMT molecule by Gauss software，the degradation pathway of SMT in the GAC@Ni/Fe three-dimensional electrode reactor is proposed. This research provides a green, healthy and effective method for removing sulfonamide micro-polluted wastewater.

Electrochemical treatment of poly- and perfluoroalkyl substances in brines

Bench-scale experiments were performed to evaluate the electrochemical oxidation, via direct anodic oxidation and indirect oxidation from salt-derived species, of diluted aqueous film forming foam (AFFF) in brine solutions.

PINO/NHPI-mediated selective oxidation of cycloalkenes to cycloalkenones via a photo-electrochemical method

The photo-electrochemical oxidation of cyclohexene to 2-cyclohexene-1-one was successfully performed with excellent Faraday efficiency (>99%) via indirect oxidation with a PINO/NHPI mediator and O2 on a BiVO4/WO3 photoanode under low applied bias.

Electrochemical oxidation of ciprofloxacin in two different processes: the electron transfer process on the anode surface and the indirect oxidation process in bulk solutions

Two typical electrochemical processes, including direct electron transfer and indirect oxidation, were investigated with ciprofloxacin as a target compound.