Future of renewable energy in India for sustainable development

Renewable energy (wind energy, solar power, geothermal energy and tidal power) is the inexhaustible energy resulted from contineous regeneration. The main features of renewable energy is that it can be obtained without damaging the environment. It has been found that renewable energy sources have the ability to give solutions to environmental related problems being faced by mankind. India is highly populated country on this planet and has more energy demand. The renewable energy is one of the major options to meet this quality. Today, renewable energy account for 37% of India’s most energy consumptions. In this paper, efforts have been made to discuss the future of renewable energy of our country.

Potential of tidal power plants with least square method on Toaya Beach

The use of energy, especially electrical power, is needed by the wider community— lots of alternative energy from nature, especially in Indonesia that can be utilized to produce electricity. One of the newest alternative examples is the energy produced by tides. Tidal energy is a type of renewable energy that is relatively more predictable in number. One method that can process the waves is the Least Square Method. Where the results of data processing using this method can be known based on tidal observations for 15 days on Toaya Beach located in Donggala Regency, Central Sulawesi, the types of tidal types that occur based on the results of Formzahl’s count is 0.357 that the tidal types that occur are varied types leaning to double daily, with a Root Mean Square Error (RMSE) of 0.028, which means that the difference between predictive results and observational data is accurate. Then also obtained the value of the design water level elevation that is the highest high water level (HHWL) is 2.7 meters, and the lowest low water level (LLWL) is -0.3 meters with a height difference is 3.0 meters. So with the high height difference, the total energy generated by two times a day with a sea area of 9 km2 which is capable of producing energy movement from seawater can be calculated the potential energy generated from the waves of Toaya Beach, which is 5,53 MW.

Implementation of Innovative Manufacturing Technologies in Foundries for Large-Volume Components

The development of new manufacturing technologies opens up new perspectives for the production of propellers (diameter < 5 m), especially since the use of the established sand casting process as a technology is only partially competitive in today’s market. Therefore, different applications of generative manufacturing methods for the implementation into the production process were investigated. One approach is the mould production using additive manufacturing processes. Investigations showed that especially for large components with high wall thicknesses available systems and processes for sand casting mould production are cost-intensive and conditionally suitable. With our development of a large-format FDM printer, however, the direct production of large-format positive moulds for, for example, yacht propellers up to 4 m in diameter is possible. Due to the comparatively low accuracy requirements for the mould, the focus is on the durability of the drive system and the rigidity of this FDM printer. Equipped with simple linear technology in portal design and cubic design of the frame structure with rigid heated print bed, the aim is to achieve maximum material extrusion via the print head. The production of plastic models not only facilitates handling during the moulding process, but also allows considerable time and cost savings to be made during the running process. A further step in our development is the direct production of the components using WAAM. A possible concept for robot-supported build-up welding for the production of new innovative propeller geometries is presented using the example of a hollow turbine blade for a tidal power plant.

Potential of tidal power plants on Tibo Beach with spektrum method

As time evolved, the demand for electrical energy also increased. As a result, renewable energy is needed to replace fossil fuels as fuel for electricity generation. Tidal water is one of the renewable alternative energy sources used as fuel for electricity generation. The tides will never run out and can also be predicted. One method that can predict data about waves is the Spectrum Method. Tide prediction data can be indicated by carrying out tidal height observations for 15 days at Tibo Beach, Donggala Regency, Central Sulawesi. Based on observations, the data obtained are the highest high water level (HHWL) is 2.4 meters, and the lowest low water level (LLWL) is 0.1 meters. Also, the type of tides on the Tibo coast is a type of mixed waves that tend to double daily, there are two tides with high water and two tides with low water with different water levels. Because the value of formzahl is 0.312. With a 2.4 meter high HHWL and a sea area of 35.4 km2, the electricity generated is 13.08 MW.

The Parametric Estimation of Tidal Potential Power Density using Modeling Strategies at Hajambro Creek of Indus Delta, Pakistan

There are many accessible resources for electricity generation using renewable energy, like, solar, wind, tidal and wave etc. The output of all these resources depend on weather conditions, force of gravity or rotation of the Earth, but tidal energy has a major advantage over many other forms of renewable generation as it is predictable over a long period of time. Pakistan has about 1000 km long coastline with complex network of creeks in the Indus delta region which include 17 major creeks and further divide into a number of estuaries with considerable tidal ranges and tidal current. This research study is carried out at one of these major creeks namely Hajambro (Hajambro river) and extends from Hajambro 24ᵒ 08’N 67ᵒ 22’E (sea mouth) to Keti Bander 24ᵒ 09’N 67ᵒ 27’E (mouth of river Indus). Study area is targeted within creek region where there is a large shortfall of electricity observed and this situation has threaten the community socioeconomically. In this research study, available tidal energy resources of Hajambro creek are assessed, tidal power density models and bathymetry model are developed in Arc-GIS (geographical informationsystem) environment, for the first time. A comprehensive tidal turbine technology review is conducted and based on up-to-date tidal turbine technology review and results achieved from assessment of tidal energy resources, deployment of a turbine at Hajambro creek is proposed. With effective area of 9.46 km2 mean spring estimated power (seasonally) is observed as 14 MW in winter, 12.9 MW in Pre-Monsoon, 13.6 MW in Monsoon and 13.1 MW in Post-Monsoon.

Optimization of a Grid-Connected Microgrid Using Tidal and Wind Energy in Cook Strait

The Cook Strait in New Zealand is an ideal location for wind and tidal renewable sources of energy due to its strong winds and tidal currents. The integration of both technologies can help to avoid the detrimental effects of fossil fuels and to reduce the cost of electricity. Although tidal renewable sources have not been used for electricity generation in New Zealand, a recent investigation, using the MetOcean model, has identified Terawhiti in Cook Strait as a superior location for generating tidal power. This paper investigates three different configurations of wind, tidal, and wind plus tidal sources to evaluate tidal potential. Several simulations have been conducted to design a DC-linked microgrid for electricity generation in Cook Strait using HOMER Pro, RETScreen, and WRPLOT software. The results show that Terawhiti, in Cook Strait, is suitable for an offshore wind farm to supply electricity to the grid, considering the higher renewable fraction and the lower net present cost in comparison with those using only tidal turbines or using both wind and tidal turbines.