Simulated Performance of TFRC, DCCP, SCTP, and UDP Protocols Over Wired Networks

Multimedia applications impose different QoS requirements (e.g., bounded end-to-end delay and jitter) and need an enhanced transport layer protocol that should handle packet loss, minimize errors, manage network congestion, and transmit efficiently. Across an IP network, the transport layer protocol provides data transmission and affects the QoS provided to the application on hand. The most common transport layer protocols used by Internet applications are TCP and UDP. There are also advanced transport layer protocols such as DCCP and TFRC. The authors evaluated the performance of UDP, DCCP, SCTP, and TFRC over wired networks for three traffic flows: data transmission, video streaming, and voice over IP. The evaluation criteria were throughput, end-to-end delay, and packet loss ratio. They compared their performance to learn in which traffic flow/service each of these protocols functions better than the others. The throughput of SCTP and TFRC is better than UDP. DCCP is superior to SCTP and TFRC in terms of end-to-end delay. SCTP is suitable for Internet applications that require high bandwidth.

A Study on QoE Improvement of Online Games with UDP Multipathization by SDN

This paper studies QoE improvement of Online games by applying the UDP/TCP multi-pathization method by SDN. The method can distribute packets for one stream to multiple paths by controlling the network with software with-out any new transport layer protocol. The author evaluates QoE for two actual online games using the multi-pathization method by experiments with subjects. The experimental results show the following. The authors show that multi-pathization by SDN is effective for online games. However, to further improve QoE, it is necessary to investigate and examine the packet length threshold that is appropriate for online games when distributing packets to each path.

Energy Consumption Optimization by Increasing The Processor Speed of Moving Communication Devices in Transport Layer Protocol

The energy efficiency of mobile devices becomes very important, considering the development of mobile device technology starting to lead to smaller dimensions and with the higher processor speed of these mobile devices. Various studies have been conducted to grow energy-aware in hardware, middleware and application software. The step of optimizing energy consumption can be done at various layers of mobile communication network architecture. This study focuses on examining the energy consumption of mobile devices in the transport layer protocol, where the processor speed of the mobile devices used in this experiment is higher than the processor speed used in similar studies. The mobile device processor in this study has a speed of 1.5 GHz with 1 GHz RAM capacity. While in similar studies that have been carried out, mobile device processors have a speed of 369 MHz with a RAM capacity of less than 0.5 GHz. This study conducted an experiment in transmitting mobile data using TCP and UDP protocols. Because the video requires intensive delivery, so the video is the traffic that is being reviewed. Energy consumption is measured based on the amount of energy per transmission and the amount of energy per package. To complete the analysis, it can be seen the strengths and weaknesses of each protocol in the transport layer protocol, in this case the TCP and UDP protocols, also evaluated the network performance parameters such as delay and packet loss. The results showed that the UDP protocol consumes less energy and transmission delay compared to the TCP protocol. However, only about 22% of data packages can be transmitted. Therefore, the UDP protocol is only effective if the bit rate of data transmitted is close to the network speed. Conversely, despite consuming more energy and delay, the TCP protocol is able to transmit nearly 96% of data packets. On the other hand, when compared to mobile devices that have lower processor speeds, the mobile devices in this study consume more energy to transmit video data. However, transmission delay and packet loss can be suppressed. Thus, mobile devices that have higher processor speeds are able to optimize the energy consumed to improve transmission quality.Key words: energy consumption, processor, delay, packet loss, transport layer protocol

The Arithmetic Of elliptic Curve for Prime Curve Secp-384r1 Using One Variable Polynomial Division for Security of Transport Layer Protocol

In this paper, we present a new method for solving multivariate polynomial elliptic curve equations over a finite field. The arithmetic of elliptic curve is implemented using the mathematical function trace of finite fields. We explain the approach which is based on one variable polynomial division. This is achieved by identifying the plane p with the extension of and transforming elliptic curve equations as well as line equations arising in point addition or point doubling into one variable polynomial. Hence the intersection of the line with the curve is analogous to the roots of the division between these polynomials. Hence this is the different way of computing arithmetic of elliptic curve.Transport layer security provides endto-end security services for applications that use a reliable transport layer protocol such as TCP. Two Protocols are dominant today for providing security at the transport layer, the secure socket layer (SSL) protocol and transport layer security (TLS) protocol. One of the goals of these protocols is to provide server and client authentication, data confidentiality and data integrity. The above goals are achieved by establishing the keys between server and client, the algorithm is called elliptic curve digital signature algorithm (ECDSA) and elliptic curve DiffieHellman (ECDH). These algorithms are implemented using standard for efficient cryptography(SEC) prime field elliptic curve secp-384r1 currently specified in NSA Suite B Cryptography. The algorithm is verified on elliptic curve secp384r1and is shown to be adaptable to perform computation