One-step synthesis of sequence-controlled multiblock polymers with up to 11 segments from monomer mixture

Switchable polymerization holds considerable potential for the synthesis of highly sequence-controlled multiblock. To date, this method has been limited to three-component systems, which enables the straightforward synthesis of multiblock polymers with less than five blocks. Herein, we report a self-switchable polymerization enabled by simple alkali metal carboxylate catalysts that directly polymerize six-component mixtures into multiblock polymers consisting of up to 11 blocks. Without an external trigger, the catalyst polymerization spontaneously connects five catalytic cycles in an orderly manner, involving four anhydride/epoxide ring-opening copolymerizations and one L-lactide ring-opening polymerization, creating a one-step synthetic pathway. Following this autotandem catalysis, reasonable combinations of different catalytic cycles allow the direct preparation of diverse, sequence-controlled, multiblock copolymers even containing various hyperbranched architectures. This method shows considerable promise in the synthesis of sequentially and architecturally complex polymers, with high monomer sequence control that provides the potential for designing materials.

Artificial polyhydroxyalkanoate poly[2-hydroxybutyrate-block-3-hydroxybutyrate] elastomer-like material

The first polyhydroxyalkanoate (PHA) block copolymer poly(2-hydroxybutyrate-b-3-hydroxybutyrate) [P(2HB-b-3HB)] was previously synthesized using engineered Escherichia coli expressing a chimeric PHA synthase PhaCAR with monomer sequence-regulating capacity. In the present study, the physical properties of the block copolymer and its relevant random copolymer P(2HB-ran-3HB) were evaluated. Stress–strain tests on the P(88 mol% 2HB-b-3HB) film showed an increasing stress value during elongation up to 393%. In addition, the block copolymer film exhibited slow contraction behavior after elongation, indicating that P(2HB-b-3HB) is an elastomer-like material. In contrast, the P(92 mol% 2HB-ran-3HB) film, which was stretched up to 692% with nearly constant stress, was stretchable but not elastic. The differential scanning calorimetry and wide-angle X-ray diffraction analyses indicated that the P(2HB-b-3HB) contained the amorphous P(2HB) phase and the crystalline P(3HB) phase, whereas P(2HB-ran-3HB) was wholly amorphous. Therefore, the elasticity of P(2HB-b-3HB) can be attributed to the presence of the crystalline P(3HB) phase and a noncovalent crosslinked structure by the crystals. These results show the potential of block PHAs as elastic materials.

Sequence-complementarity dependent co-assembly of phosphodiester-linked aromatic donor-acceptor trimers

Development of the interplay between monomer sequence and supramolecular chemistry is critical if chemistry is to recapitulate the properties of proteins and nucleic acids in the synthetic world. We have created sequenced trimers of aromatic donor/acceptor units which participate in charge-transfer interactions, linked by phosphodiesters. Each sequence displays its own characteristic self-assembly, and moreover complementary sequences interact with each other to produce new nanostructures and emergent thermochromism. This finding paves the way towards new functional nanomaterials which make bio-analogous use of sequence to tune structure.

Regio- and sequence-controlled conjugated topological oligomers and polymers via boronate-tag assisted solution-phase strategy

The regulation of polymer topology and the precise control over the monomer sequence is crucial and challenging in polymer science. Herein, we report an efficient solution-phase synthetic strategy to prepare regio- and sequence-controlled conjugated polymers with topological variations via the usage of methyliminodiacetic acid (MIDA) boronates. Based on the solubility of MIDA boronates and their unusual binary affinity for silica gel, the synthesized regio- and sequence-defined conjugated oligomers can be rapidly purified via precipitation or automatic liquid chromatography. These synthesized discrete oligomers can be used for iterative exponential and sequential growth to obtain linear and dendrimer-like star polymers. Moreover, different topological sequence-controlled conjugated polymers are conveniently prepared from these discrete oligomers via condensation polymerization. By investigating the structure-property relationship of these polymers, we find that the optical properties are strongly influenced by the regiochemistry, which may give inspiration to the design of optoelectronic polymeric materials.

Artificial polyhydroxyalkanoate poly[2-hydroxybutyrate-block-3-hydroxybutyrate] elastomer-like material

The first polyhydroxyalkanoate (PHA) block copolymer poly(2-hydroxybutyrate-b-3-hydroxybutyrate) [P(2HB-b-3HB)] was previously synthesized using engineered Escherichia coli expressing a chimeric PHA synthase PhaCAR with monomer sequence-regulating capacity. In the present study, the physical properties of the block copolymer and its relevant random copolymer P(2HB-ran-3HB) were evaluated. Stress–strain tests on the P(88 mol% 2HB-b-3HB) film showed an increasing stress value during elongation up to 393%. In addition, the block copolymer film exhibited slow contraction behavior after elongation, indicating that P(2HB-b-3HB) is an elastomer-like material. In contrast, the P(92 mol% 2HB-ran-3HB) film, which was stretched up to 692% with nearly constant stress, was stretchable but not elastic. The differential scanning calorimetry and wide-angle X-ray diffraction analyses indicated that the P(2HB-b-3HB) contained the amorphous P(2HB) phase and the crystalline P(3HB) phase, whereas P(2HB-ran-3HB) was wholly amorphous. Therefore, the elasticity of P(2HB-b-3HB) can be attributed to the presence of the crystalline P(3HB) phase. These results show the potential of block PHAs as elastic materials.

Identifying the origin of local flexibility in a carbohydrate polymer

Correlating the structures and properties of a polymer to its monomer sequence is key to understanding how its higher hierarchy structures are formed and how its macroscopic material properties emerge. Carbohydrate polymers, such as cellulose and chitin, are the most abundant materials found in nature whose structures and properties have been characterized only at the submicrometer level. Here, by imaging single-cellulose chains at the nanoscale, we determine the structure and local flexibility of cellulose as a function of its sequence (primary structure) and conformation (secondary structure). Changing the primary structure by chemical substitutions and geometrical variations in the secondary structure allow the chain flexibility to be engineered at the single-linkage level. Tuning local flexibility opens opportunities for the bottom-up design of carbohydrate materials.

Thermoresponsive Property of Polymer Hydrogels Induced by Copolymerization of Hydrophilic and Hydrophobic Monomers: Comprehensive Study from Monomer Sequence and Water Affinity

In order to raise the possibility of practical use of thermoresponsive hydrogels in various fields, it is imperative to achieve on-demand control of responsive behavior especially by using a simple...

Pioneering Investigator 2021: Co-assembly of precision polyurethane ionomers reveals role of and interplay between individual components

Industrial and household products, such as paints, inks and cosmetics usually consist of mixtures of macromolecules that are disperse in composition, in size and in monomer sequence. Identifying structure-function relationships...

Sequence of Polyurethane Ionomers Determinative for Core Structure of Surfactant–Copolymer Complexes

The core of micelles self-assembled from amphiphiles is hydrophobic and contains little water, whereas complex coacervate core micelles co-assembled from oppositely charged hydrophilic polymers have a hydrophilic core with a high water content. Co-assembly of ionic surfactants with ionic-neutral copolymers yields surfactant–copolymer complexes known to be capable of solubilizing both hydrophilic and hydrophobic cargo within the mixed core composed of a coacervate phase with polyelectrolyte-decorated surfactant micelles. Here we formed such complexes from asymmetric (PUI-A2) and symmetric (PUI-S2), sequence-controlled polyurethane ionomers and poly(N-methyl-2-vinylpyridinium iodide)29-b-poly(ethylene oxide)204 copolymers. The complexes with PUI-S2 were 1.3-fold larger in mass and 1.8-fold larger in radius of gyration than the PUI-A2 complexes. Small-angle X-ray scattering revealed differences in the packing of the similarly sized PUI micelles within the core of the complexes. The PUI-A2 micelles were arranged in a more ordered fashion and were spaced further apart from each other (10 nm vs. 6 nm) than the PUI-S2 micelles. Hence, this work shows that the monomer sequence of amphiphiles can be varied to alter the internal structure of surfactant–copolymer complexes. Since the structure of the micellar core may affect both the cargo loading and release, our findings suggest that these properties may be tuned through control of the monomer sequence of the micellar constituents.

Phase Behavior of Gradient Copolymer Melts with Different Gradient Strengths Revealed by Mesoscale Simulations

Design and preparation of functional nanomaterials with specific properties requires precise control over their microscopic structure. A prototypical example is the self-assembly of diblock copolymers, which generate highly ordered structures controlled by three parameters: the chemical incompatibility between blocks, block size ratio and chain length. Recent advances in polymer synthesis have allowed for the preparation of gradient copolymers with controlled sequence chemistry, thus providing additional parameters to tailor their assembly. These are polydisperse monomer sequence, block size distribution and gradient strength. Here, we employ dissipative particle dynamics to describe the self-assembly of gradient copolymer melts with strong, intermediate, and weak gradient strength and compare their phase behavior to that of corresponding diblock copolymers. Gradient melts behave similarly when copolymers with a strong gradient are considered. Decreasing the gradient strength leads to the widening of the gyroid phase window, at the expense of cylindrical domains, and a remarkable extension of the lamellar phase. Finally, we show that weak gradient strength enhances chain packing in gyroid structures much more than in lamellar and cylindrical morphologies. Importantly, this work also provides a link between gradient copolymers morphology and parameters such as chemical incompatibility, chain length and monomer sequence as support for the rational design of these nanomaterials.