CFD Analysis on the Mixing Effect of Orifice Diameter in Dxygen Mixer

Rapid and uniform gas mixing is one of the core technologies of the chemical industry. A three-dimensional physical model of the oxygen mixer is established to investigate the influence of orifice diameter on mixing uniformity. And the standard k-ε turbulence model and species transport model are used to simulate the gas mixing process by using the computational fluid dynamics (CFD) commercial software Fluent. The oxygen distribution in the downstream of the mixer is analyzed qualitatively and quantitatively. It is found that the oversized and undersized orifice diameter are not desirable. It is concluded that the mixing performance of the case 2 is the b-est. In case 2, the oxygen mixing uniformity of the outlet section reaches the minimum value, which is 0.0001, which is the optimal structure.

URAGAN-2M GAS MIXING SYSTEM

Gas mixture system (GMS) was developed, created and installed at Uragan-2M (U-2M) device. GMS is based on already known gas mixing method  successive puffing. It is implemented through successive puffing of several gases from separate high pressure cylinders into working volume. A number of experiments were carried out to create a He+H2 gas mixture with different percentages. The results of measurements of the He+H2 percentage in the GMS and the U-2M vacuum chamber are in good agreement each to other. This system allows you to change the pressure of the mixture in the U-2M chamber at a constant percentage of gases in the mixture.