High air flotation efficiency of multiphase flow pump with the addition of dodecyl dimethyl benzyl ammonium chloride (DDBAC)

Recently, centrifugal multiphase pump–dissolved air flotation (CMP-DAF) has become an increasingly popular alternative to DAF that can achieve more stable performance and higher removal efficiency, and this method is widely used in sewage treatment. However, the nonuniformity of the bubble size and low adherence of the floc particles and bubbles, as well as the complicated raw water quality, pose great challenges to CMP-DAF, which does not meet the standards of water supply and drainage in practical use. In the present study, the surfactant dodecyl dimethyl benzyl ammonium chloride (DDBAC) was utilized as a flotation agent to further improve the flotation efficiency of the CMP-DAF process. DDBAC at a dosage of 0.2 mg/L was introduced to the air flotation of raw water to construct a flotation enhanced CMP air flotation system. The results showed that the average turbidity decreased to 0.433 ± 0.017 NTU, and effluent floc particles were present at 1,053 cnt/mL with an acceptable removal rate of 96.20%. In addition, 34.0% and 30.1% of UV254 and CODMn were removed, respectively. These results imply that DDBAC can increase the collision efficiency of bubble particles by reducing the diameter of the bubbles, which is conducive to forming larger flocs, and enhancing the shear resistance of the bubble–floc particles, thus improving the air flotation efficiency.

Loading and Sustained Release of Benzyl Ammonium Chloride (BAC) in Nano-Clays

Benzyl ammonium chloride (BAC) is a broad-spectrum bactericide, but vulnerable to leaching by water. In this paper, halloysite nanotubes (HNT) and montmorillonite (MMT) were used as drug carriers to load BAC, in order to achieve good anti-mildew activity and long-term sustained release properties. The HNT and MMT nano-composites were characterized by transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and nitrogen adsorption/desorption. XRD results showed that BAC intercalated the interlayer of MMT, and expanded the interlayer spacing from 1.15 nm to 1.75 nm. Pore analysis showed that BAC decreased the cavity of halloysite nanotubes to a certain extent, which indicated that BAC loaded inside the lumen of HNT successfully. TG analysis showed that the loading capacity of MMT to BAC was higher than HNT. The accelerated-release experiments revealed both two clays have significant sustained-release effects on BAC, and the releasing rate of HNT was relatively lower. Both HNT and MMT have promising application prospects as sustained-release carriers. The inhibition test showed that BAC in nano-clay has good anti-mildew resistance performance.