Novel tanning agent based on silica-nanocomposite emulsion polymers

Purpose The purpose of this paper is devoted to application of the emulsion polymer of poly(methyl methacrylate-co-butyl acrylate) prepared with in situ nano-silica as a novel tanning agent of hide to partly or totally replace chrome salt and to improve physical, thermal and mechanical properties of the tanned leather and to reduce the environmental impact of chrome tanning effluent. Design/methodology/approach Polymer/nano-silica hybrid emulsions were prepared via in situ seed emulsion polymerisation. The prepared polymers were characterised for solid content, molecular weight, viscosity, drying time, minimum film-forming temperature (MFFT) and microstructures (via transmission electron microscopy). The mechanical, thermal and surface morphological (by scanning electron microscope) properties of the treated samples were also investigated. The influences of the increase in the content of organic nano-silica on the properties of the tanned leather are discussed. Findings It was found that the viscosity, the particle size and the solid content of the prepared polymers increased as the content of the nano-silica increased while gloss and drying time of the resulting polymer film decreased. Tanning buffalo hide by Polymer F (containing a high content of nano-silica) gave desirable properties in terms of tensile strength, thermal stability and shrinkage temperature. Research limitations/implications This paper discusses the preparation and the characterisation of emulsion polymers with in situ nano-silica and their application in tanning process to enhance and improve the leather quality, as well as reduce the use of chrome tanning materials and consequently chrome tanning waste. Practical implications The tanned leather showed an improvement of physico-mechanical properties and enhancement of thermal stability. Furthermore, the tanned leather has uniform colour, softness and firmness of grain. All these promising results provide evidence to support the applicability of the prepared co-polymer/nano-silica emulsions as an efficient tanning agent that also provides lubricating properties for leather. Originality/value Since May 2015, REACH Annex XVII restricts Cr(VI) in leather articles or leather parts of articles that come into contact with skin to a concentration of less than 3 mg/kg. Cases of discovery of Cr(VI) in leather papers have been reported by the European rapid alert system on dangerous consumer products (RAPEX). The emulsion poly (methyl methacrylate-co-butyl acrylate) with in situ nano-silica that has been developed via the study reported in this paper is one of the better technologies for the reduction of chromium ratio used in tanning industry.