Role of capillary adhesion in the friction peak during the tacky transition

The friction peak that occurs in tire-road sliding when the contact changes from wet to dry was previously attributed to capillary cohesion, van der Waals attraction, and surface roughness, but the detailed mechanisms have yet to be revealed. In this study, friction and static contact experiments were conducted using a custom-built in situ optical microtribometer, which allowed us to investigate the evolution of the friction, normal load, and contact area between a polydimethylsiloxane (PDMS) film and a silicon nitride ball during water volatilization. The friction coefficient increased by 100%, and the normal force dropped by 30% relative to those in the dry condition during the wet-to-dry transition. In static contact experiments, the probe indentation depth increased, and the normal load decreased by ∼60% as the water evaporated. Combining the friction and static contact results, we propose that the large friction peak that appeared in this study can be attributed to the combined effects of increased adhesive capillary force and increased plowing during the wet-to-dry transition.

The effect of substrate wettability and modulus on gecko and gecko-inspired synthetic adhesion in variable temperature and humidity

Gecko adhesive performance increases as relative humidity increases. Two primary mechanisms can explain this result: capillary adhesion and increased contact area via material softening. Both hypotheses consider variable relative humidity, but neither fully explains the interactive effects of temperature and relative humidity on live gecko adhesion. In this study, we used live tokay geckos (Gekko gecko) and a gecko-inspired synthetic adhesive to investigate the roles of capillary adhesion and material softening on gecko adhesive performance. The results of our study suggest that both capillary adhesion and material softening contribute to overall gecko adhesion, but the relative contribution of each depends on the environmental context. Specifically, capillary adhesion dominates on hydrophilic substrates, and material softening dominates on hydrophobic substrates. At low temperature (12 °C), both capillary adhesion and material softening likely produce high adhesion across a range of relative humidity values. At high temperature (32 °C), material softening plays a dominant role in adhesive performance at an intermediate relative humidity (i.e., 70% RH).

Detachment in capillary adhesion: the relative roles of tilting and separation

We study the dynamics of detachment in 2D capillary adhesion by considering a plate that is initially attached to a flat, rigid substrate via the surface tension of a bridging liquid droplet. In particular, we focus on the effect of allowing the plate to tilt freely during its subsequent motion. A linear stability analysis shows that small perturbations from equilibrium decouple into two modes: one in which the plate separates from the substrate, remaining parallel, and another in which it tilts, simultaneously causing the bridging droplet to migrate. If the initial tilt perturbation is of a similar magnitude to (or bigger than) the separation perturbation, then the presence of this second tilting mode can significantly alter the dynamics. Indeed, this tilting mechanism changes the ultimate fate of the plate: depending on the size of the plate and the initial perturbation, the plate may anomalously detach. We discuss this observation in relation to previous experiments on a 3D system that showed a qualitatively similar anomalous detachment.

Elastocapillary adhesion of a soft cap on a rigid sphere

The capillary adhesion of soft shells on spheres of different curvature gives rise to a family of complex adhesion patterns.