Novel investigation of perovskite membrane based electrochemical nitric oxide control phenomenon

The combustion of hydrocarbon fuels within the automotive industry results in harmful and reactive incomplete combustion byproducts. Specifically, nitric oxide emissions (NO) lead to increased smog, acid rain, climate change, and respiratory inflammation within the population [Nitrogen Dioxide | American Lung Association]. Current methods for treating combustion exhaust include the catalytic converter in conjunction with nitrogen oxide traps. However, there is no active, continuous reduction method that does not require restrictions on the combustion environment (Hirata in Catal Surv Asia 18:128–133, 2014). Here, a small voltage potential oscillation across a newly designed electro-chemical catalytic membrane significantly reduces NO emissions. A ceramic membrane consisting of two dissimilar metal electrodes, sandwiching a dielectric layer, is able to achieve an NO reduction in excess of 2X that of a platinum group metal (PGM) three way catalytic converter. An analysis of the exhaust effluent from the membranes indicates N2O as a precursor to N2 and O2 formation, without the introduction of ammonia (NH3), during the reaction of NO indicating a divergence from current literature. Our results demonstrate how an oscillatory electric potential on a catalytic surface may alter anticipated reaction chemistry and interaction between the catalytic surface and fluid flow.

Insight into Steam Permeation through Perovskite Membrane via Transient Modeling

A dynamic model based on BaCe0.9Y0.1O3−δ (BCY10) perovskite membrane for steam permeation process is presented here to essentially investigate the internal mechanism. The transient concentration distribution and flux of the charged species and the electric potential distribution within the membrane on the steam permeation process are analyzed in detail via simulation based on this model. The results indicate that the flux of steam can be improved via elevating operating temperatures, enlarging the difference of the partial steam pressure between two sides of the membrane, increasing the membrane density, and reducing the membrane thickness. Moreover, it was found that the polarization electric potential between both sides of the membrane occurs during the steam permeation process, especially at the steady state of the steam permeation process. The polarization electric potential reaches the maximum value at about 1050 K in this membrane. The evolution of electric potential can explain the influence of the above-mentioned factors on the steam permeation process. This study advances the mechanism of steam permeation through perovskite membrane, which provides a new strategy for the fundamental investigation of related species permeation (oxygen, carbon dioxide, hydrogen, etc.) on inorganic membranes via transient modeling.

Recent progress and challenges in membrane-based O2/N2 separation

Compared with current conventional technologies, oxygen/nitrogen (O2/N2) separation using membrane offers numerous advantages, especially in terms of energy consumption, footprint, and capital cost. However, low product purity still becomes the major challenge for commercialization of membrane-based technologies. Therefore, numerous studies on membrane development have been conducted to improve both membrane properties and separation performance. Various materials have been developed to obtain membranes with high O2permeability and high O2/N2selectivity, including polymer, inorganic, and polymer-inorganic composite materials. The results showed that most of the polymer membranes are suitable for production of low to moderate purity O2and for production of high-purity N2. Meanwhile, perovskite membrane can be used to produce a high-purity oxygen. Furthermore, the developments of O2/N2separation using membrane broaden the applications of oxygen enrichment for oxy-combustion, gasification, desulfurization, and intensification of air oxidation reactions, while nitrogen enrichment is also important for manufacturing pressure-sensitive adhesive and storing and handling free-radical polymerization monomers.