double fed induction generator
Recently Published Documents


TOTAL DOCUMENTS

122
(FIVE YEARS 10)

H-INDEX

9
(FIVE YEARS 0)

CYCLOTRON ◽  
2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Akbar Rusmanegara ◽  
Iradiratu Diah P. K.

Pada zaman di mana energi terbarukan sudah mulai banyak digunakan, pembangkit listrik pun juga mulai beralih ke pembangkit dengan sumber energi yang terbarukan dan lebih ramah lingkungan. Salah satu sumber energi terbarukan yang biasa digunakan pada pembangkit listrik adalah angin. Doubly Fed Induction Generator (DFIG) merupakan sistem pembangkit tenaga angin yang dapat mengubah tenaga kinetik menjadi tenaga listrik. Pada penerapan DFIG permasalahan yang ditemui adalah tegangan keluaran tidak stabil dikarenakan kecepatan angin yang selalu berubah-ubah. Hal ini sangat merugikan konsumen sehingga ketidakstabilan tegangan akan mengakibatkan ketidakseimbangan sistem, bahkan akan mengakibatkan life time peralatan listrik menjadi pendek. Dengan control grid side yang dilengkapi dengan Fuzzy Logic sebagai upaya pembangkit listrik dapat menghasilkan tegangan stabil sesuai yang diinginkan pada setiap kondisi kecepatan angin yang berubah- ubah. Sehingga kestabilan tegangan DC tetap terjaga. Hasil simulasi pengujian ini menunujukkan jika pengontrol fuzzy logic dapat menjaga kestabilan tegangan DC yang diinginkan yaitu 1100V.


Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1640
Author(s):  
Xiaotao Peng ◽  
Renjie Chen ◽  
Jicheng Zhou ◽  
Shiyao Qin ◽  
Ran Bi ◽  
...  

The subsynchronous resonance (SSR) of a double-fed induction generator (DFIG) and its suppression method are studied in this paper. The SSR may be aroused by the interaction between the double-fed induction generator and the series-compensated transmission lines. This paper proposes an expression of the electrical damping for assessing the SSR stability based on the complex torque method. The expression is derived by linearizing the DFIG model at the operating point. When the mechanical damping is neglected, the expression can be used to calculate whether the electrical damping is positive or negative to judge the SSR stability. The expression can quantitatively analyze the impact of the wind speed, the compensation degree, and the parameters of the rotor speed controller and the rotor-side converter controller on the SSR stability. Furthermore, a subsynchronous damping control (SDC) strategy is designed to suppress the SSR. The parameters of the SDC are optimized by particle swarm optimization (PSO) based on the electrical damping. Finally, the above research is verified by the PSCAD/EMTDC time-domain simulations. The results show that the stability of SSR decreases with the decrease of wind speed, the increase of series compensation degree, the increase of proportional coefficient, and the decrease of integral coefficient in rotor speed controller and rotor-side converter. The designed subsynchronous oscillation controller can suppress the SSR of a DFIG.


2021 ◽  
Vol 27 (3) ◽  
pp. 33-53
Author(s):  
Mayada Yousif Heelan ◽  
Fadhil Abbas AL-Qrimili

This paper introduces a complete design and simulation of a controller for the double fed induction generator (DFIG) turbine. The work also included the solar updraft tower (SUT) design to supply Al-Mahmoudia hospital in Baghdad/Iraq. The design includes the daily average load estimation, annual solar irradiance and, temperature monitoring, and logging. According to the data obtained from the Ministry of Science and Technology, Baghdad has low wind speed. Therefore, the (SUT) has been designed to generate electrical power depending on the difference between the external and internal air temperature. The temperature difference will generate a suitable airspeed to drive the wind turbine, connected to the proposed (DFIG) generators that generate the appropriate electrical power required. The proposed controller of the DFIG is based on (vector control) by using PI control to feed the power of the rotor circuit parts. The (DFIG) consists of two back-to-back PWM inverters connected between the stator and the rotor. This paper's main goal is to design and simulate a controller for two (DFIG's) under various operating conditions driven by a wind turbine, which is rotated by the warm wind effect inside the solar updraft tower. This is to generate maximum power with constant magnitude and frequency of the output voltage. The proposed controller's performance is verified by using a simulation model built using the MATLAB/Simulink software. The simulation results confirm that the proposed controller (Vector Control), using PI controller maintains both the magnitude and frequency of the output voltage stays constant at the nominal values and stabilization irrespective of the wind speed variations and extract maximum output power. In addition, the controller provides (MPPT) to the turbine to generate the maximum power according to the available wind speed. The torque will give the rotor quadrature current (Iqr), which causes speed change according to the working conditions. The results also showed the steady-state and discussed the two different methods (Vector Control, MPPT) of the control strategy (DFIG). MATLAB and Simulink software used for modeling one of DFIG's modules to supply the hospital load of 276 KW. Besides, simulation results show that the controller demonstrates significant improvements in terms of better stability and faster response.


2021 ◽  
Author(s):  
Nouha Bouchiba ◽  
Souhir Sallem ◽  
Mohamed Ben Ali Kammoun ◽  
Larbi Chrifi-Alaoui ◽  
Saïd Drid

In the last few decades, among the wide range of renewable energy sources, wind energy is widely used. Variable speed wind energy conversion systems based on double fed induction generator have a considerable interest mostly in case of islanded networks and/or isolated applications. In this paper, as a means to supply remote areas, an investigation of a wind energy conversion system (WECS) based on a double fed induction generator (DFIG) is carried out. The presence of both wind turbine aerodynamics and DFIG coupled dynamics causes strong nonlinearities in the studied system. Wind speed and demanded power variations have a major impact on the quality of the produced energy. In order to control and maintain the stator output voltage and frequency at their nominal values (220 V/50 Hz) under wind speed and load variations, this work presents a study of three kinds of controllers: PI, Back-Stepping and Sliding Mode controllers. These controllers are integrated in the studied system and a comparison of their dynamic performances has been developed. Moreover, in order to ensure the rotor side converter safety on the one hand and to guarantee an optimal operation of the DFIG on the other hand, a management strategy is proposed in this work. Simulation results are performed using Matlab/Simulink environment and show the effectiveness and the accuracy of each controller compared to others mainly with the presence of wind speed and load demand variations.


Sign in / Sign up

Export Citation Format

Share Document