Identification of the main mixing process in the synthesis of alloy nanoparticles by laser ablation of compacted micropowder mixtures

Alloy nanoparticles offer the possibility to tune functional properties of nanoscale structures. Prominent examples of tuned properties are the local surface plasmon resonance for sensing applications and adsorption energies for applications in catalysis. Laser synthesis of colloidal nanoparticles is well suited for generating alloy nanoparticles of desired compositions. Not only bulk alloys but also compacted mixtures of single-metal micropowders can serve as ablation targets. However, it is still unknown how mixing of the individual metals transfers from the micro- to the nanoscale. This work experimentally contributes to the elucidation of the mixing processes during the laser-based synthesis of alloy nanoparticles. Key parameters, such as the initial state of mixing in the ablation target, the laser pulse duration, the laser spot size, and the ablation time, are varied. Experiments are performed on a cobalt-iron alloy, relevant for application in oxidation catalysis, in ethanol. The extent of mixing in the targets after ablation and in individual nanoparticles are studied by energy-dispersive X-ray spectroscopy and by cyclic voltammetry at relevant conditions for the oxygen evolution reaction, as model reaction. The results point at the benefits of well pre-mixed ablation targets and longer laser pulse durations for the laser-based synthesis of alloy nanoparticles. Graphical abstract

Nanoscale engineering of ring-mounted nanostructure around AAO nanopores for highly sensitive and reliable SERS substrates

Surface-enhanced Raman scattering (SERS) is recognized as one of the most favored techniques for enhancing Raman signals. The morphology of the SERS substrate profoundly affects molecular Raman spectra. This study aimed to construct a ring-mounted nanostructured substrate via liquid–liquid two-phase self-assembly (LLSA) incorporated with anodic aluminum oxide (AAO) membrane transfer techniques. High-density nanoparticles (NPs) assembled on AAO membranes were ascribed to reduce the diameters of the nanopores, with Au–Ag alloy NPs to regulate the dielectric constant so as to reveal the local surface plasmon resonance tunability. SERS engineered in this way allowed for the fabrication of a ring-mounted nanostructured substrate where the distribution density of NPs and dielectric constant could be independently fine-tuned. High SERS activity of the substrate was revealed by detecting the enhanced factor of crystal violet and rhodamine 6G molecules, which was up to 1.56 × 106. Moreover, SERS of thiram target molecules confirmed the supersensitivity and repeatability of the substrate as a practical application. The results of this study manifested a low-cost but high-efficiency ring-mounted nanostructured SERS substrate that might be suitable in many fields, including biosensing, medical research, environmental monitoring, and optoelectronics.

Highly Sensitive Biosensor Based on Partially Immobilized Silver Nanopillars in the Terahertz Band

In this paper, a highly sensitive biosensor based on partially immobilized silver nanopillars is proposed. The working frequency of this sensor is in the terahertz band, and the range of the detected refractive index is 1.33 to 1.38. We set air holes of two different sizes on the cross-section of the optical fiber and arranged them into a hexagon. In order to improve the sensitivity, silver nanopillars were immobilized on part of the surface of the fiber cladding. The method for detecting the change of refractive index of the bio-analyte was based on local surface plasmon resonance properties of noble metal. The research recorded valuable data about the values of loss peak and full width at half maximum as well as resonance frequency shift under different setting conditions. The data present the biosensor‘s final sensitivity as 1.749 THz/RIU.

Plasmon-Enhanced Photoresponse of Self-Powered Si Nanoholes Photodetector by Metal Nanowires

In this work, we report the development of self-powered photodetectors that integrate silicon nanoholes (SiNHs) and four different types of metal nanowires (AgNWs, AuNWs, NiNWs, PtNWs) applied on the SiNHs’ surface using the solution processing method. The effectiveness of the proposed architectures is evidenced through extensive experimental and simulation analysis. The AgNWs/SiNHs device showed the highest photo-to-dark current ratio of 2.1 × 10−4, responsivity of 30 mA/W and detectivity of 2 × 1011 Jones along with the lowest noise equivalent power (NEP) parameter of 2.4 × 10−12 WHz−1/2 in the blue light region. Compared to the bare SiNHs device, the AuNWs/SiNHs device had significantly enhanced responsivity up to 15 mA/W, especially in the red and near-infrared spectral region. Intensity-modulated photovoltage spectroscopy (IMVS) measurements revealed that the AgNWs/SiNHs device generated the longest charge carrier lifetime at 470 nm, whereas the AuNWs/SiNHs showed the slowest recombination rate at 627 nm. Furthermore, numerical simulation confirmed the local field enhancement effects at the MeNWs and SiNHs interface. The study demonstrates a cost-efficient and scalable strategy to combine the superior light harvesting properties of SiNHs with the plasmonic absorption of metallic nanowires (MeNWs) towards enhanced sensitivity and spectral-selective photodetection induced by the local surface plasmon resonance effects.

Rapid controlled synthesis of gold–platinum nanorods with excellent photothermal properties under 808 nm excitation

Noble metal nanomaterials are particularly suitable as photothermal transduction agents (PTAs) with high photothermal conversion efficiency (PCE) due to local surface plasmon resonance (LSPR). Studies on different gold–platinum (Au–Pt) bimetal nanoparticles exhibiting the LSPR effect have provided a new idea for the synthesis of excellent PTAs. But there is no simple and scalable method for the controllable synthesis of Au–Pt nanoparticles with adjustable LSPR wavelength range. In this work, the effects of Ag+ and K2PtCl4 on the deposition of Pt on the surface of gold nanorods (AuNRs) were investigated. A fast, precise, and controlled synthesis of dumbbell-like Pt-coated AuNRs (Au@Pt NRs) under mild conditions is proposed. The synthesized Au@Pt NRs have a longitudinal LSPR wavelength of 812 nm, which is very close to a common laser wavelength of 808 nm. The Au@Pt NRs exhibit excellent photothermal properties when irradiated with a laser. The temperature increased by more than 36 °C after irradiation for 10 min, with a PCE of about 78.77%, which is much higher than that of AuNRs (57.33%). In addition, even after four on/off cycles, the Au@Pt NRs are able to maintain the photothermal properties and retain their optical properties, indicating that they have excellent photothermal stability and reusability.

Construction of Au@Metal-organic framework for sensitive determination of creatinine in urine

Creatinine level in urine is an important biomarker for renal function diseases, such as renal failure, glomerulonephritis, and chronic nephritis. The Au@MIL-101(Fe) was prepared by in situ growth of Au nanoparticles in MIL-101(Fe) as a selective SERS substrate. The Au@MIL-101(Fe) offers the great local surface plasmon resonance (SPR) effect due to gold nanoparticles aggregation inside metal-organic frameworks. The framework structure could enrich trace target samples and drag them into SPR hot spots. The optimal Au@MIL-101(Fe) composite substrate is used for analyzing creatinine in urine and the limit of detection is down to 0.1[Formula: see text][Formula: see text]mol/L and a linear relationship is ranging from 1[Formula: see text][Formula: see text]mol/L to 100[Formula: see text][Formula: see text]mol/L.