Methods improving practical implementation of technology of combined recirculating fish farming and intensive crop production

The article focuses on the problem of adopting the effective methods for combined cultivation of food products in cities, which requires the rapidly deployable and scalable aquaponic urban farms for year-round cultivating the aquaculture and crop products. Experimental work on cultivating the agricultural products in a small-sized system of combined recirculating fish farming and intensive crop production (aquaponics) has been carried out. A well-grounded idea of the qualitative and quantitative requirements for feed formulations, the possibilities of their optimization due to including the ingredients of natural origin was obtained. With combined recirculating fish farming and intensive crop production the control over the physiological state of the aquatic organisms grown on feed on their own formulation is carried out on the analysis of special biochemical parameters, which complement the general characteristics of the limits of reference values of homeostasis constants and determine the physiological status of fish. Feeding rates (% of body weight) of fish determine the amount of organic load for nutrition of plant growing objects, in particular leafy greens. In the course of research it was found out that when feeding sterlet (100 g) with the developed feed with protein content 45% the feeding rate is 4% of the body weight. The equivalent area 1 m2 with leafy greenery accounts for 40–50 g of feed with a mass of water bodies up to 5.0 kg/m3.

Thermal asymmetries influence effects of warming on stage and size-dependent predator-prey interactions

Climate warming directly influences the developmental and feeding rates of organisms. Changes in these rates are likely to have consequences for species interactions, particularly for organisms affected by stage- or size-dependent predation. However, because of differences in species-specific responses to warming, predicting the impact of warming on predator and prey densities can be difficult. We present a general model of stage-dependent predation with temperature-dependent vital rates to explore the effects of warming when predator and prey have different thermal optima. We found that warming generally favored the interactor with the higher thermal optimum. Part of this effect occurred due to the stage-dependent nature of the interaction, and part due to thermal asymmetries. Furthermore, large differences in thermal optima between predators and prey (i.e., a high degree of asymmetry) led to a weaker interaction. Interestingly, below the predator and prey thermal optima, warming caused prey densities to decline, even as increasing temperature improved prey performance. We also parameterize our model using values from a well-studied system, Arctia virginalis and Formica lasioides, in which the predator has a warmer optimum. Overall, our results provide a general framework for understanding stage- and temperature-dependent predator-prey interactions, and illustrate that the thermal niche of both predator and prey are important to consider when predicting the effects of climate warming.

Air-Fluidized Aggregates of Black Soldier fly Larvae

Black soldier fly larvae are a sustainable protein source and play a vital role in the emerging food-waste recycling industry. One of the challenges of raising larvae in dense aggregations is their rise in temperature during feeding, which, if not mitigated, can become lethal to the larvae. We propose applying air-fluidization to circumvent such overheating. However, the behavior of such a system involves complex air-larva interactions and is poorly understood. In this combined experimental and numerical study, we show that the larval activity changes the behavior of the ensemble when compared to passive particles such as dead larvae. Over a cycle of increasing and then decreasing airflow, the states (pressure and height) of the live larva aggregates are single-value functions of the flow speed. In contrast, dead larva aggregates exhibit hysteresis characteristic of traditional fluidized beds, becoming more porous during the ramp down of airflow. This history-dependence for passive particles is supported by simulations that couple agent-based dynamics and computational fluid dynamics. We show that the hysteresis in height and pressure of the aggregates decreases as the activity of simulated larvae increases. To test if air fluidization can increase larval food intake, we performed feeding trials in a fluidization chamber and visualized the food consumption via x-ray imaging. Although the food mixes more rapidly in faster airflow, the consumption rate decreases. Our findings suggest that providing moderate airflow to larval aggregations may alleviate overheating of larval aggregations and evenly distribute the food without reducing feeding rates.

The influence of sponge-dwelling gobies (Elacatinus horsti) on the feeding efficiency of their Caribbean tube sponge ( Aplysina sp.) hosts

Mutualistic associations between benthic marine invertebrates and reef taxa are common. Sponge-dwelling gobies benefit from protection within sponge tubes and greater food availability. Sponge-dwelling gobies are hypothesized to increase sponge pump rates by consuming polychaete parasites, but such increases have not yet been demonstrated. We investigated the association between sponge-dwelling gobies (Elacatinus horsti) and two species of tube sponge (Aplysina lacunosa and Aplysina archeri) in Bonaire, Caribbean Netherlands. We visually assessed goby presence in sponges and used in situ methods with fluorescein dye to measure estimate feeding rates via pump rates. Aplysina archeri were more likely to host a goby than A. lacunosa. For both sponge species, pump rates of tubes with gobies were higher on average than those of tubes without gobies. Our observations, therefore, suggest that E. horsti associations with Aplysina are likely mutualistic relationships in which sponges benefit from higher feeding rates when gobies are present.

Divergent temperature-specific metabolic and feeding rates of native and invasive crayfish

Temperature is one of the most important factors governing the activity of ectothermic species, and it plays an important but less studied role in the manifestation of invasive species impacts. In this study, we investigated temperature-specific feeding and metabolic rates of invasive and native crayfish, and evaluated how temperature regulates their ecological impacts at present and in future according to different climatic scenarios by bioenergetics modelling. We conducted a series of maximum food consumption experiments and measured the metabolic rates of cold-adapted native noble crayfish (Astacus astacus) and invasive signal crayfish (Pacifastacus leniusculus) originally from a warmer environment over a temperature gradient resembling natural temperatures in Finland. The maximum feeding rates and routine metabolic rates (RMR) of native noble crayfish were significantly higher at low temperatures (< 10 °C than the rates of invasive signal crayfish. The RMRs of the species crossed at 18 °C, and the RMRs of signal crayfish were higher at temperatures above 18 °C. These findings indicate that the invader’s thermal niche has remained stable, and the potential impacts per capita are lower at suboptimal cold temperatures than for the native species. Our bioenergetics modelling showed that the direct annual predation impact of noble and signal crayfish seem similar, although the seasonal dynamics of the predation differs considerably between species. Our results highlight that the temperature-specific metabolic and feeding rates of species need to be taken into account in the impact assessment instead of simple generalisations of the direction or magnitude of impacts.

The association of Lantana camara with elephant (Elephas maximus), their food, habitat use and feeding behaviour in southern India

<p>Invasive exotic species pose an enormous threat to the world's biological diversity. Invasions can alter native communities, replacing local biotas with non-indigenous species introduced by humans. Exotic plant invasions can have negative effects on native flora, which can be in turn detrimental to the herbivores that depend on the vegetation. In this dissertation, I examined the association of an exotic invasive weed, Lantana camara L., with the Asian elephant (Elephas maximus), its food resources (grass and browse), habitat use and feeding behaviour in Mudumalai Tiger Reserve, southern India. Exotic plant invasions are often associated with alterations or declines in native floral species. I first examined the association of L. camara and measured environmental covariates with floral species assemblage and richness, elephant browse plants, percentage grass cover and percentage grass occupancy. A multivariate analysis revealed a significant association of L. camara with floral species assemblage and richness, some elephant browse plants and grass cover within the moist deciduous forest (MDF) and dry deciduous forest (DDF), but not in the thorn forest (TF) of Mudumalai. My results suggest that L. camara appears to be capable of altering the floral community in some habitats. These results also suggest that changes in the floral community and a reduction in grass cover due to L. camara invasion could be detrimental to elephant and other herbivores that depend on grass in this reserve. I then examined the association of L. camara with habitat use by elephant. Elephant dung density was used to assess elephant habitat use from 62 line transects, each 1-km in length. I found no evidence that L. camara was associated with elephant habitat use across habitats, although the interaction term between one habitat (DDF) and L. camara was significantly associated with elephant dung density suggesting that the effect of L. camara was different in different habitats. This indicates that L. camara is associated with elephant habitat use within certain habitats. Habitat and impact of human settlements were significantly associated with elephant habitat use across habitats within Mudumalai. In the DDF, however, only L. camara was associated with elephant habitat use. I conclude that while no significant effects of L. camara were seen across habitats, in specific habitats, negative associations of this invasive plant with elephant habitat use, possibly through the reduction of grass cover, are possible. These results indicate that L. camara appears detrimental to elephant in certain habitats and removal of L. camara in these habitats should be prioritised so as to facilitate growth of grass and native browse species, especially if elephant populations continue to expand. Lastly, I examined the association of elephant behaviour, assessed from feeding and stepping rates, with variation in L. camara invasion. Fifty-seven elephants were observed for a total of 64.3 hours using the focal-animal sampling method. Elephant were never observed to feed on L. camara, but rather fed on grass and browse that were present within and around L. camara patches. Feeding rates (number of trunksful·min⁻¹) were negatively associated with L. camara invasion. A path analysis, which assesses both direct and indirect effects of independent variables, indicated that the total effect of L. camara on feeding rates was 11% less than the direct negative association owing to a positive indirect relationship between L. camara and feeding rates through grass cover and browse density. Lantana camara was not significantly associated with variation in stepping rates (number of steps·min⁻¹). Rather, stepping rates were negatively associated with grass cover and positively associated with browse density. My results indicate that L. camara is potentially capable of changing elephant feeding rates, likely through a loss of grass areas due to L. camara invasion. Wild elephants do not eat L. camara, and this invasive plant appears to take the place of an important food source. My results indicate that managers should prioritize their focus on certain habitats to control the impact of L. camara on elephants and vegetation. However, this study was of a correlational nature based on observational data. Experimental work is therefore needed to test for causal relationships among the variables I measured, over multiple seasons and in different habitats. Experimental evidence will enhance our understanding of how invasive weeds modify floral communities, elephant habitat use and behaviour and help determine whether L. camara is a 'passenger' or 'driver' of these changes in this ecosystem.</p>

The association of Lantana camara with elephant (Elephas maximus), their food, habitat use and feeding behaviour in southern India

<p>Invasive exotic species pose an enormous threat to the world's biological diversity. Invasions can alter native communities, replacing local biotas with non-indigenous species introduced by humans. Exotic plant invasions can have negative effects on native flora, which can be in turn detrimental to the herbivores that depend on the vegetation. In this dissertation, I examined the association of an exotic invasive weed, Lantana camara L., with the Asian elephant (Elephas maximus), its food resources (grass and browse), habitat use and feeding behaviour in Mudumalai Tiger Reserve, southern India. Exotic plant invasions are often associated with alterations or declines in native floral species. I first examined the association of L. camara and measured environmental covariates with floral species assemblage and richness, elephant browse plants, percentage grass cover and percentage grass occupancy. A multivariate analysis revealed a significant association of L. camara with floral species assemblage and richness, some elephant browse plants and grass cover within the moist deciduous forest (MDF) and dry deciduous forest (DDF), but not in the thorn forest (TF) of Mudumalai. My results suggest that L. camara appears to be capable of altering the floral community in some habitats. These results also suggest that changes in the floral community and a reduction in grass cover due to L. camara invasion could be detrimental to elephant and other herbivores that depend on grass in this reserve. I then examined the association of L. camara with habitat use by elephant. Elephant dung density was used to assess elephant habitat use from 62 line transects, each 1-km in length. I found no evidence that L. camara was associated with elephant habitat use across habitats, although the interaction term between one habitat (DDF) and L. camara was significantly associated with elephant dung density suggesting that the effect of L. camara was different in different habitats. This indicates that L. camara is associated with elephant habitat use within certain habitats. Habitat and impact of human settlements were significantly associated with elephant habitat use across habitats within Mudumalai. In the DDF, however, only L. camara was associated with elephant habitat use. I conclude that while no significant effects of L. camara were seen across habitats, in specific habitats, negative associations of this invasive plant with elephant habitat use, possibly through the reduction of grass cover, are possible. These results indicate that L. camara appears detrimental to elephant in certain habitats and removal of L. camara in these habitats should be prioritised so as to facilitate growth of grass and native browse species, especially if elephant populations continue to expand. Lastly, I examined the association of elephant behaviour, assessed from feeding and stepping rates, with variation in L. camara invasion. Fifty-seven elephants were observed for a total of 64.3 hours using the focal-animal sampling method. Elephant were never observed to feed on L. camara, but rather fed on grass and browse that were present within and around L. camara patches. Feeding rates (number of trunksful·min⁻¹) were negatively associated with L. camara invasion. A path analysis, which assesses both direct and indirect effects of independent variables, indicated that the total effect of L. camara on feeding rates was 11% less than the direct negative association owing to a positive indirect relationship between L. camara and feeding rates through grass cover and browse density. Lantana camara was not significantly associated with variation in stepping rates (number of steps·min⁻¹). Rather, stepping rates were negatively associated with grass cover and positively associated with browse density. My results indicate that L. camara is potentially capable of changing elephant feeding rates, likely through a loss of grass areas due to L. camara invasion. Wild elephants do not eat L. camara, and this invasive plant appears to take the place of an important food source. My results indicate that managers should prioritize their focus on certain habitats to control the impact of L. camara on elephants and vegetation. However, this study was of a correlational nature based on observational data. Experimental work is therefore needed to test for causal relationships among the variables I measured, over multiple seasons and in different habitats. Experimental evidence will enhance our understanding of how invasive weeds modify floral communities, elephant habitat use and behaviour and help determine whether L. camara is a 'passenger' or 'driver' of these changes in this ecosystem.</p>

Effect of Hammer Shape and Impact Area on Hammer Mill Performance under Different Feed Rates

The research aims to compare the performance (PC) and specific energy consumption (Spc.) of the hammer mill when using the T-hammer against the (traditional) rectangular hammer. A homemade mill with four hammers was used in experiment. 36 treatments: 2 hammer shape x 3 impact area (840, 720 and 960 mm2) x 2 feeding rates (1500 and 3000 g min-1) x 3 replicates, with completely random design. The results showed that there was no significant effect of hammer shape on PC at the feed rate of 3000 g min-1, while there was an effect at the rate of 1500 g min-1. An effect was also found for the impact area on the PC at both feeding rates and on Spc., as an inverse relationship appeared between the impact area and mill productivity at the feed rate 1500 g min-1. The area of 720 mm2 surpassed the area 480 and 960 mm2 at the rate of feeding 3000 g min-1, as it recorded 1215.65 g min-1 compared to 950.65 and 882.65 g min-1, respectively. There is effect of feeding rate on PC and Spc. The traditional hammer is recommended for simplicity of design, manufacture and performance at high feed rates compared to the T-shaped hammer.

Effect of Liquid Feeding Rate on Carbonation of Precipitated Calcium Carbonate via Continuous Method

Precipitated calcium carbonate (PCC) is an innovative product generated from lime that significantly offers various functional characteristics in fulfilling numerous market demand. PCC is produced by hydrating high-calcium quicklime resulting slurry so-called milk-of-lime and reacting the slurry with carbon dioxide (CO2) via carbonation process. The resulting PCC product is extremely white and typically has a uniform narrow particle size distribution. PCC is available in various crystal morphologies and sizes, which can be tailored to optimize performance in a specific application. The final properties of the PCC can be diversified by controlling processing parameters. In this current work, effect of liquid air pressure corresponding to feeding rate on a formation of PCC was investigated. In enhancing the product yield, the quicklime was initially converted into a solution containing calcium ion (Ca2+) using natural promoter agent. Subsequently, CO2 gas was continuously supplied into the Ca-rich ionic solution, thus inducing carbonation reaction to form PCC. This present work showed the carbonation time of producing PCC was effectively reduced as a function of feeding rate from 15 minutes at 10 psi to only 7 minutes at 50 psi. The PCC yield slightly increased from 19 g to 23 g with increasing the feeding rate from 10 psi to 50 psi, respectively. Morphologically, the PCC particles were dominated by rhombohedral structures at various feeding rates with an indication of intergrowth mechanism. This current finding signified the increasing feeding rate offered a significant reduction of PCC production time that might be efficiently applied by the industrial manufacturers.