Hydrothermal Crystallization of Bismuth Oxychlorides (BiOCl) Using Different Shape Control Reagents

Bismuth oxychloride photocatalysts were obtained using solvothermal synthesis and different additives (CTAB—cetyltrimethylammonium bromide, CTAC—cetyltrimethylammonium chloride, PVP–polyvinylpyrrolidone, SDS–sodium dodecylsulphate, U—urea and TU—thiourea). The effect of the previously mentioned compounds was analyzed applying structural (primary crystallite size, crystal phase composition, etc.), morphological (particle geometry), optical (band gap energy) parameters, surface related properties (surface atoms’ oxidation states), and the resulted photocatalytic activity. A strong dependency was found between the surface tension of the synthesis solutions and the overall morpho-structural parameters. The main finding was that the characteristics of the semiconductors can be tuned by modifying the surface tension of the synthesis mixture. It was observed after the photocatalytic degradation, that the white semiconductor turned to grey. Furthermore, we attempted to explain the gray color of BiOCl catalysts after the photocatalytic decompositions by Raman and XPS studies.

Microstructure and electrical conductivity of 3Y-TZ/Al2O3 composites

Various amounts of Al2O3 (0.25, 0.5 and 1.0mol%) were added to tetragonal polycrystalline material (3YTZP), prepared using the hydrothermal crystallization method. The effects of the added amount as well as the sintering temperature on the microstructure and electrical properties of the 3Y-TZP/Al2O3 composites were investigated. The alumina addition was found to affect the microstructure of the 3Y-TZP samples obtained after sintering at 1400 or 1500?C only to a slight extent. The lowest values of the blocking factor, which represents the contribution of grain boundary resistivity to the total resistivity of a polycrystal, were observed for the 3Y-TZP with Al2O3 additions of 0.25 or 0.5mol% at measurement temperatures of 550 and 600 ?C. The study proves that the 3Y-TZP/Al2O3 should be taken into consideration as solid electrolyte in the intermediatetemperature solid oxide fuel cells.

Regulating the size and acidity of SAPO-34 zeolites using dual templates to enhance the selectivity of light olefins in MTO

To understand relationship of catalytic performance with crystalline size and acidity of SAPO-34 zeolites better, a series of SAPO-34 zeolites were prepared by hydrothermal crystallization using palygorskite as silicon and...

KLn(MoO4)2 micro/nanocrystals (Ln = La-Lu, Y): systematic hydrothermal crystallization, structure, and the performance of doped Eu3+ for optical thermometry

Systematic crystallization of KLn(MoO4)2 double molybdate micro/nanocrystals was achieved in this work for the family of lanthanide elements (excluding Pm) and Y via hydrothermal reaction under the optimized conditions of...

Fast-synthesis and catalytic property of heterogeneous Co-MOF catalysts for the epoxidation of α-pinene with air

A method for synthesizing Co-MOF by rapidly rotating hydrothermal crystallization is proposed. When the rotation speed was 150 rpm, only 2 h was needed to synthesize Co-MOF-150-2 with high catalytic activity and stability.

Temperature-regulated construction of hierarchical titanosilicate zeolites

A temperature-regulated method was developed to construct anatase-free hierarchical TS-1 zeolite catalysts by utilizing a two-step hydrothermal crystallization strategy with tetrabutylammonium hydroxide as the sole organic template.