STRESS-DEFORMED STATE OF THE FOUNDATION OF HYDRAULIC STRUCTURES AT CONTROLLED COMPENSATION DISCHARGE

Nnumerical simulation of the process of injection of mortar into the thickness of the sandy base during the work on lifting and leveling the structure by the method of compensatory injection is carried out. An author's program has been developed that implements the finite element method (FEM) in a spatial formulation, taking into account the elastic-plastic nature of soil deformation, in which a special element in the form of a spheroid has been developed to describe the expanding area at the location of the injector, which changes its volume during the injection of mortar. During the verification of the program, the results of mathematical modeling were compared with the data of a physical experiment conducted by PhD Luca Masini from the University of La Sapienza (Rome, Italy). Numerical modeling of the stress-strain state of the base of the structure during repair work is considered by the example of lifting the foundation plate of the Zagorskaya PSPP-2. A number of tasks are being solved related to minimizing the number of injection columns, their location, the pitch of the cuffs, the selection of portions of the injected solution, taking into account the requirements for uniform lifting of the foundation plate in order to avoid additional cracking.

Effect of the dewatering on the surrounding terrains during the construction of Metrostation 9-III of the Sofia Metropoliten

The international practice often faces significant settlements of terrains and structures due to dewatering. This study presents of the dewatering impact during the construction of Metrostation 9-III from the Sofia Metropoliten on the surrounding terrains and buildings. The subsidences are quantified for specific values of the soil deformation modulus and varying values of the soil hydraulic conductivity.

Non-Contact Experiment Investigation of the Interaction between the Soil and Underground Granary Subjected to Water Buoyancy

The buoyancy of underwater can cause the underground granary to overall float, or even overturn, and the interaction between the soil and underground granary is the key to its stability. This paper introduces a non-contact experiment system utilizing the digital image correlation (DIC) technology and particle image velocity (PIV) technology, and its measurement accuracy is analyzed. Then, this system is employed to study the granary displacement and the soil deformation around the granary subjected to the buoyancy of water. Results show that with the increase of the degree of compaction of the soil around the granary, the floating water level increases by 10.77% and the vertical displacement decreases by 17%. When the soils around the granary are loose sands, the soil deformation range shows an obvious inverted triangle. When the soils are medium dense sands, the soil deformation zone concentrates at the junction of the conical granary bottom and granary wall. When the soils are dense sands, the disturbed range of the soil obviously reduces, and the soil deformation concentrates on both sides of the granary wall and is distributed symmetrically. Finally, taking the medium dense sands around the granary as an example, the reasons for the unstable failure of the granary subjected to buoyancy are discussed, assisted by the soil pressure theory of retaining wall. With the granary increasingly inclining, the soil deviating from the inclined direction of the granary loses its support, which drives the soils to reach the active limit state. The soil in the inclined direction of the granary is squeezed, resulting in passive soil pressure on the granary wall. The soil deformation increases continuously to a passive limit equilibrium state, and the soil continuously develops a sliding surface, resulting in the unstable failure of the granary. This research is expected to provide the technical guidance for the design and popularization of underground granaries.

Field Tests' Study of Deviation Correction of Building near Excavation

Deviation correction of building is a big challenge for engineers. Without powerful technique for deviation, no special guidance can be followed to conduct the deviation rectification of buildings, which brings numerous failure cases. In this study, a case study was performed to provide insight into the behavior of a special technique for deviation rectification of building near excavation. The new technique was introduced firstly, and then, the field test data, in terms of lateral displacement of wall of pit, water level deviation, and soil deformation around pile of the building, were addressed to show the performance of the function of each process and the mechanism of it. The results show that this new technique for the deviation rectification of building works very well to uplift the whole building to reach the destination position (maximum uplift = 9.71 cm) and meets the requirement of design demand, without negative effect on the adjacent excavation reported.