Physician-Modified Endograft With Inner Branches for the Treatment of Complex Aortic Urgencies

Purpose To describe the use of physician-modified endograft (PMEG) with the exclusive use of inner branches or in combination with fenestrations for the urgent treatment of complex aortic aneurysms. Technique We present two urgent cases. A patient with a 6.8 cm saccular juxtarenal aneurysm and another patient with a contained rupture of the thoracoabdominal aorta right above the celiac trunk (CT). In both cases, a Cook Zenith TX2 thoracic endograft was back-table modified, in the first case by adding three fenestrations and one inner branch for the left renal artery to improve sealing due to its partial involvement in the aneurysm and, in the second case, with the use of two inner branches for the CT and superior mesenteric artery. Both procedures were successful, with uneventful postoperative courses and complete aneurysm exclusion on postoperative CT angiography. Conclusion Use of PMEGs with inner branches is feasible for urgent repair in complex aortic anatomy.

Completion of Target Vessel Stenting After FEVAR via Snare Technique in a Patient with Tortuous Right Renal Artery

Target vessel catheterization remains challenging in patients with complex anatomies. Fenestrated endovascular aneurysm repair (FEVAR) is an established technique to treat aortic aneurysms. In this case report, we treated a juxtarenal aneurysm using FEVAR. Initial attempts to complete the target vessel stenting were unsuccessful because of an unfavorable orifice and tortuosity of the right renal artery. The completion of FEVAR was achieved with a bifemoral approach using a snare system, which aligned the tip of a steerable sheath at the level of the fenestration for the right renal artery to create a stable condition. Control angiography and computed tomography confirmed a successful stenting of the target vessel and the sealing of the fenestration without an endoleak.

Gutter Characteristics and Stent Compression of Self-Expanding vs Balloon-Expandable Chimney Grafts in Juxtarenal Aneurysm Models

Purpose: To assess in silicone juxtarenal aneurysm models the gutter characteristics and compression of different types of chimney graft (CG) configurations. Materials and Methods: Fifty-seven combinations of Excluder C3 or Conformable Excluder stent-grafts (23, 26, and 28.5 mm) were deployed in 2 silicone juxtarenal aneurysm models with 3 types of CGs: Viabahn self-expanding (VSE; 6 and 13 mm) or Viabahn balloon-expandable (VBX; 6, 10, and 12 mm) stent-grafts and Advanta V12 balloon-expandable stent-grafts (ABX; 6 and 12 mm). Setups were divided into 4 groups on the basis of increasing CG and main graft (MG) diameters. Two independent observers assessed gutter size and type as well as CG compression on computed tomography scans using postprocessing software. Results: In the smaller diameter combinations (6-mm CG and 23-, 26-, and 28.5-mm MGs), both VSE (p=0.006 to 0.050) and ABX (p=0.045 to 0.050) showed lower gutter areas and volumes compared with VBX. In turn, the VBX showed a nonsignificant tendency to decreased compression, especially compared to ABX. Use of the Excluder C3 showed a 6-fold increase in type A1 gutters (related to type Ia endoleak) as compared to the Conformable Excluder (p=0.018). Balloon-expandable stent-grafts (both ABX and VBX) showed a 3-fold increase in type A1 gutters in comparison with self-expanding stent-grafts (p=0.008). Conclusion: The current study suggests that use of the Conformable Excluder in combination with VSE chimney grafts is superior to the other tested CG/MG combinations in terms of gutter size, gutter type, and CG compression.

Secondary Fill Minimizes Gutter Size in Chimney EVAS Configurations In Vitro

Purpose: To investigate in an in vitro model if secondary endobag filling can reduce gutter size during chimney endovascular aneurysm sealing (chEVAS). Materials and Methods: Nellix EVAS systems were deployed in 2 silicone juxtarenal aneurysm models with suprarenal aortic diameters of 19 and 24 mm. Four configurations were tested: EVAS with 6-mm balloon-expandable (BE) or self-expanding (SE) chimney grafts (CGs) in the renal branches of both models. Balloons were inflated simultaneously in the CGs and main endografts during primary and secondary endobag filling and polymer curing. Computed tomography (CT) was performed immediately after the primary and secondary fills. Cross-sectional lumen areas were measured on the CT images to calculate gutter volumes and percent change. CG compression was calculated as the reduction in lumen surface area measured perpendicular to the central lumen line. The largest gutter volume and highest compression were presented per CG configuration per model. Results: Secondary endobag filling reduced the largest gutter volumes from 99.4 to 73.1 mm3 (13.2% change) and 84.2 to 72.0 mm3 (27.6% change) in the BECG configurations and from 67.2 to 44.0 mm3 (34.5% change) and 92.7 to 82.3 mm3 (11.2% change) in the SECG configurations in the 19- and 24-mm models, respectively. Secondary endobag filling increased CG compression in 6 of 8 configurations. BECG compression changed by −0.2% and 5.4% and by −1.0% and 0.4% in the 19- and 24-mm models, respectively. SECG compression changed by 10.2% and 16.0% and by 7.2% and 7.3% in the 19- and 24-mm models, respectively. Conclusion: Secondary endobag filling reduced paragraft gutters; however, this technique did not obliterate them. Increased CG compression and prolonged renal ischemia time should be considered if secondary endobag filling is used.