Hydrogeochemistry of Hot Springs and the 2018 Mojiang M 5.9 Earthquake-Related Chemical Changes in the Simao Basin, China

The Simao Basin is characterized by strong tectonic activity and frequent seismicity. This study investigated the hydrochemical characteristics of 21 thermal springs in the Simao Basin from 2018 to 2020. In this study period, the 2018 Mojiang M5.9 earthquake caused several hydrochemical changes. The results indicate that the Simao Basin contained saline spring waters, HCO3−-rich spring waters, and SO42−-rich spring waters. In the study area, the water chemistry types were controlled by stratum lithology. Saline springs flowed through red beds and dissolved large amounts of halite, which is a rich source of Cl−and Na+ ions. In the hot spring waters, Ca2+ (Mg2+) and HCO3− were mainly derived from the dissolution of carbonate minerals, gypsum, and anhydrite of Triassic rocks. The higher SO42- content in the hot spring waters was caused by the pyrite present in Ailaoshan metamorphic rocks. The reservoir temperatures (121–289 °C) in the Simao Basin were estimated by the silica-enthalpy mixing model equation and the silica-enthalpy diagram. The hot springs had higher reservoir temperatures (>250 °C) and were mainly located at the edges of the basin. Metamorphic rocks exposed in the region had low permeabilities and these springs was close to nearby deep faults that provided deep heat. In most springs, the concentrations of Ca2+ and HCO3− ions increased obviously before the 2018 Mojiang M5.9 earthquake; however, the concentrations of these ions decreased after the earthquake. The hydrogeochemical variations might be attributed to the vigorous water-rock interactions and the mixing of secondary fluids. The entry of cold shallow groundwater caused changes in the reservoir temperatures of some spring samples.

Origin and Circulation of Springs in the Nangqen and Qamdo Basins, Southwestern China, Based on Hydrochemistry and Environmental Isotopes

The Nangqen and Qamdo (NQ-QD) basins in China have very rich geothermal and brine resources. The origin and spatiotemporal evolutionary processes of its hot and saline springs however remain unclear. Geochemical and isotopic (18O, 2H, 3H) studies have therefore been conducted on the water from the geothermal and saline springs in the NQ-QD Basin. All saline springs in the study area are of the Na-Cl geochemical type while geothermal waters show different geochemical types. The oxygen and hydrogen isotopic compositions of the springs in the NQ-QD Basin are primarily controlled by meteoric water or ice-snow melt water and are influenced by rock-water interactions. It is found that the saline springs in the study area are derived from the dissolution of halite and sulfate that occur in the tertiary Gongjue red bed, while the hot springs in the QD Basin are greatly influenced by the dissolution of carbonatites and sulfates from the Bolila (T3b) and Huakaizuo (J2h) formations. Results from silica geothermometry and a silicon-enthalpy hybrid model indicate that the apparent reservoir temperatures and reservoir temperatures for the hot springs in the QD Basin range from 57–130°C to75–214°C, respectively. Deuterium analysis indicates that most of the hot springs are recently recharged rain water. Furthermore, the saline springs have a weaker groundwater regeneration capacity than the hot springs. Tritium data shows that the ranges of calculated residence times for springs in this study are 25 to 55 years, and that there is a likelihood that hot springs in the QD Basin originated from two different hydrothermal systems. The geochemical characteristics of the NQ-QD springs are similar to those of the Lanping-Simao Basin, indicating similar solute sources. Thus, the use of water isotope analyses coupled with hydrogeochemistry proves to be an effective tool to determine the origin and spatiotemporal evolution of the NQ-QD spring waters.

Origin and Evolution of Saline Spring Water in North and Central Laos Based on Hydrochemistry and Stable Isotopes (δD, δ18O, δ11B, and δ37Cl)

This paper discusses the origin and evolution of saline springs in north and central Laos, based on chemical and stable isotopes (δD, δ18O, δ11B, and δ37Cl). All the saline springs in this study are of the Na–Cl geochemical type. The geochemical and water isotope values suggest that the saline springs in this study are mainly derived from meteoric water and/or ice and snow melt from the surrounding mountains and that they also experienced strong evaporation and intense rock–water interactions. The ionic ratios, characteristic coefficients, ternary Ca–SO4–HCO3 phase diagrams, and saturation indices of minerals show that the dissolution of halite, sulfate, and carbonate rocks may be the solute sources for saline springs in this study, whereas the underground brines in the Thakhek potash mining area are geochemically influenced by the dissolution of carnallite and sylvite. The global geothermal δ11B–Cl/B relationship and δ11B values (5.50 to 36.01‰) of saline springs suggest a continental origin of B. This B is most likely derived from marine carbonate rocks and marine evaporates (gypsum and halite) of the late Cretaceous, which is similar to the saline springs of the Nangqen–Qamdo–Simao Salt Basin. The δ37Cl value (−0.12 to +0.79) and the Cl/Br ratio (4076 to 9853) show that dissolution of late cretaceous marine halite layers, atmospheric precipitation, and water–rock interactions between volcanic rocks, mudstones, and sandstone can restrict the δ37Cl values in saline springs. Results from silica geothermometry and multi–mineral equilibrium diagrams indicate that the reservoir temperatures for the saline springs range from 87–137 °C and experience deep circulation. Hydrochemical characteristic coefficients suggest that saline springs in the Muang Say basin may have leached sylvinite and carnallite and that the potash exploration prospect in this area is relatively good.

Hydrogeochemistry of Hot Springs and the 2018 Mojiang M 5.9 Earthquake-Related Chemical Changes in the Simao Basin, China

Due to strong tectonic activity, the Simao Basin frequently experiences earthquakes with a magnitude of 6 or greater. This study investigated the hydrochemical characteristics of 21 thermal springs in the Simao Basin from 2018 to 2020 to determine how the 2018 Mojiang M5.9 earthquake caused hydrochemical changes. The results showed that the Simao Basin contained saline spring waters, HCO3−-rich spring waters, and SO42−-rich spring waters. Stratum lithology characteristics in the area exerted obvious control over the water chemistry characteristics. Saline springs flowed through red beds and dissolved large amounts of halite, which is rich with Cl−and Na+. Ca2+ (Mg2+) and HCO3− in the hot spring waters were mainly derived from the dissolution of carbonate minerals, gypsum, and anhydrite in Triassic rocks. The higher SO42− content in the hot spring waters was influenced by pyrite contained in Ailaoshan metamorphic rocks. The reservoir temperatures (121–289° C) in the Simao Basin were estimated by the silica-enthalpy mixing model equation and silica-enthalpy diagram. The hot springs with higher reservoir temperatures (> 250° C) were mainly located at the edges of the basin, which may correlate with nearby deep faults that provided deep heat and metamorphic rocks with low permeabilities. The concentrations of Ca2+ and HCO3− in most springs increased obviously before the Mojiang M5.9 earthquake but decreased after the earthquake. Changes also occurred in the reservoir temperatures of some spring samples. These hydrogeochemical variations might be attributable to accelerated water-rock interactions and/or the mixing of second fluids due to the earthquake.

Alignment of saline springs with evaporite karst structures in northeast Alberta, western Canada: analogue for cretaceous hypogene brine seeps to the surface

Meteoric and glacial meltwater charged groundwater, mixed with dissolved salts from Devonian sources at depth, discharged as saline springs along topographic lows of the Athabasca River Valley, which downcuts into the Cretaceous Athabasca oil sands deposit in northeast Alberta, western Canada. These Quaternary saline seeps have TDS measurements, isotope signatures and other chemical characteristics indicative of the groundwater flows coming in contact with Prairie Evaporite (M. Devonian) salt beds, 200 m below the surface. Migrations up-section of groundwater with dissolved chloride and sulphate salts occurred along salt dissolution collapse breccia zones that cross-cut Upper Devonian limestone strata. Seeps discharged along the karstic Devonian limestone paleotopography, the unconformity surface flooring the Lower Cretaceous McMurray Formation. Saline to brine springs along the Athabasca River Valley have TDS measurements that can exceed 100,000 mg/L. Quaternary salt removal was insignificant compared to the voluminous removal of the 80-130 m thick salt section for 1000s km2 during the Early Cretaceous configuration of the Devonian paleotopography, which partially controlled depositional patterns of the overlying McMurray Formation, principal host rock of the Athabasca oil sands. Little is known of the storage or disposition of voluminous brines that would have resulted from this regional-scale removal of the salt beds below the Athabasca deposit during the Cordilleran configuration of the foreland Alberta Basin. Holocene dissolution trends and discharges at the surface as saline springs are proposed as a modern analogue for voluminous Early Cretaceous brine seeps to the surface along salt dissolution collapse breccia zones, concurrent with deposition of the McMurray Formation. This model links several characteristics of the McMurray Formation as responses to Aptian brine seeps to the surface. These include: (1) the emplacement of a drainage-line silcrete along the margins of the Assiniboia PaleoValley, now partially exhumed by the Athabasca River Valley, (2) distribution of brackish-water burrowing organisms, and (3) diagenesis of calcite-cemented sand intervals.

New Amphora and Halamphora (Bacillariophyta) species from springs in the northern Apennines (Emilia-Romagna, Italy)

Background and aims – The detailed analysis of algae and cyanoprokaryotes in a heterogeneous group of spring habitats (including all the different typologies) of the northern Apennines (Emilia-Romagna Region, Italy) revealed a new Amphora species in a small mountain flowing spring with low conductivity, and a new Halamphora species in a large, inland-saline (Triassic gypsum), fast flowing spring (Poiano spring). The present study aims to describe in detail these two new species found in contrasting spring types. Methods – This study is based on light microscopy (both fresh –for plastids – and prepared materials) and scanning electron microscopy observations, as well as a thorough morphological, physical, chemical, and biological characterization of the habitats. Key results – Amphora eileencoxiae sp. nov. is most similar to A. vetula (and allied taxa), and is characterized by the outline with acutely rounded, moderately ventrally bent ends, by the dimensions, and by the well-defined, semi-elliptic dorsal area. Halamphora poianensis sp. nov. is most similar to H. gasseae but differs by the higher stria density, the clearly ventrally bent ends, and the strongly developed dorsal raphe ledge. Conclusions – This is a contribution to the knowledge of the genera Amphora and Halamphora in mountain springs in understudied geographic areas and inland-saline springs, the species communities of which are likely insufficiently explored.