Improving the torsional response of asymmetric buildings with self-centering controlled rocking steel braced frame system

Self-centering controlled rocking steel braced-frame (SC-CR-SBF) is proposed as an earthquake-resistant system with low damage. Pre-stressed vertical strands provide a self-centering mechanism in the system and energy absorbing fuses restrict maximum displacement. Presence of asymmetry in structures can highlight the advantages of employing this structural system. Moreover, these days designing and constructing asymmetric and irregular structures is inevitable and as a result of architectural attractiveness and requirements of different functions of buildings, they are of great importance. Consequently, in these types of structures in order to minimize seismic responses, particular measures should be taken into consideration. Proper distribution of strength and stiffness throughout the plan of structures with self-centering systems can play a considerable role in resolving problems associated with asymmetry in these structures. In this study, the asymmetric buildings with 10% and 20% mass eccentricities and having different arrangements of centers were simulated. The models were analyzed under a set of 22 bidirectional far-field ground-motion records and corresponding responses of maximum roof drift, acceleration and rotation of the roof diaphragms of the structures with different arrangements of the center of mass, stiffness and strength were computed and studied. Results show that proper distribution of stiffness and strength throughout the plan of the structures with SC-CR-SBF system reduces the maximum roof drift as well as the rotation of the roof diaphragm. With appropriate arrangement of the centers, maximum drift response of the asymmetric structure decreases as much as roughly 20% and the ratio of the maximum drift response of the asymmetric structure to the response of the similar symmetric structure with the same overall stiffness and strength was 1.1. In other words, maximum drift response of the asymmetric structure with SC-CR-SBF system is acceptably close to the one for the symmetric building.

Full-Scale Blast Tests on a Conventionally Designed Three-Story Steel Braced Frame with Composite Floor Slabs

This paper summarizes the findings of two full-scale blasts tests on a steel braced frame structure with composite floor slabs, which are representative of a typical office building. The aim of this research study was to experimentally characterize the behavior of conventionally designed steel braced frames to blast loads when enclosed with conventional and blast-resistant façade. The two tests involved a three-story, steel braced frame with concentrical steel braces, which are designed to resist typical gravity and wind loads without design provisions for blast or earthquake loads. During the first blast test, the structure was enclosed with a typical, non-blast-resistant, curtainwall façade, and the steel frame sustained minimal damage. For the second blast test, the structure was enclosed with a blast-resistant façade, which resulted in higher damage levels with some brace connections rupturing, but the building did not collapse. Observations from the test program indicate the appreciable reserved capacity of steel brace frame structures to resist blast loads.

Damage Identification of a Steel Frame Based on Integration of Time Series and Neural Network under Varying Temperatures

The effect of varying temperatures is one of the most important challenges of vibration-based damage identification due to its bigger effects on the structural response than the damage itself. This study presents a methodology incorporating the autoregressive (AR) time series model with two-step artificial neural networks (ANNs) to identify damage under temperature variations. AR coefficients, which are extracted by fitting the AR models to acceleration responses, are however sensitive to temperature changes, resulting in false diagnoses. Thus, two-step ANN models with the inputs of difference in AR coefficients are utilized to compensate the detrimental temperature variations. Finite element (FE) models of a steel-braced frame structure, simulating several damage scenarios with different damage locations and severities at fluctuating temperatures, are used to verify the effectiveness and reliability of this approach. Numerical results indicate that the proposed approach could successfully recognize, locate, and quantify damage by using output-only vibration and temperature data regardless of varying temperatures and noise perturbations.