An integrated PMU architecture for power system applications

Time synchronized phasors obtained using Phasor Measurement Units (PMU) spread across wide areas have revolutionized power system monitoring and control. These synchronized measurements must be accurate and fast in order to comply with the latest IEEE standards for synchrophasor measurements. The speed at which a PMU provides an output depends on the group delay associated with that PMU and the permissible group delay in-turn decides the utility of a PMU for either control or measurement application. Based on the group delay compensation techniques, in the literature, two individual types of PMUs, such as causal and non-causal PMUs have been introduced. This paper presents an approach where both causal and non-causal PMUs are combined in an integrated PMU architecture. This method not only illustrates the group delay performance of two PMUs in a single module, but also can be used for multiple functions. In this environment several PMU algorithms have been compared with respect to their group delays and their effect on the response time. Application of the integrated PMU architecture to a four-machine 10-bus power system has been demonstrated using a six-input PMU with three-phase voltage and current signals as inputs. Different causal compensation schemes are introduced due to the availability of voltage and current-based frequency and ROCOF signals. Impact of these compensation schemes on PMU accuracy is evaluated through the Total Vector Error (TVE) index. The influence of these compensation schemes on measurements like power and impedance is also investigated. Finally, outputs from the integrated PMU architecture are fed into a Power System Stabilizer (PSS) to control the small-signal stability performance of a power system during dynamic conditions.

Fuzzy Inference System Approach for Locating Series, Shunt, and Simultaneous Series-Shunt Faults in Double Circuit Transmission Lines

Many schemes are reported for shunt fault location estimation, but fault location estimation of series or open conductor faults has not been dealt with so far. The existing numerical relays only detect the open conductor (series) fault and give the indication of the faulty phase(s), but they are unable to locate the series fault. The repair crew needs to patrol the complete line to find the location of series fault. In this paper fuzzy based fault detection/classification and location schemes in time domain are proposed for both series faults, shunt faults, and simultaneous series and shunt faults. The fault simulation studies and fault location algorithm have been developed using Matlab/Simulink. Synchronized phasors of voltage and current signals of both the ends of the line have been used as input to the proposed fuzzy based fault location scheme. Percentage of error in location of series fault is within 1% and shunt fault is 5% for all the tested fault cases. Validation of percentage of error in location estimation is done using Chi square test with both 1% and 5% level of significance.