Моделирование источника ультрахолодных нейтронов на реакторе ПИК

The paper presents the simulation of a complex of reserch with ultracold neutrons at the reactor PIK (Gatchina, Russia). The complex is being built on the basis of a high-intensity source of ultracold neutrons at the channel GEK-4. A Monte Carlo model has been developed, which includes a source, a neutron guide system and an experimental setup for search for the electric dipole moment of a neutron, taking into account their real location in the main hall of the reactor. Using the developed computer model the density of ultracold neutrons in the setup was obtained, which is 200 ^-3. It is 50 times higher than at the source at the Institut Laue-Langevin (Grenoble, France). This density will allow to achieve a sensitivity of measurements in the experiment of 1·10^-27 е·cm/year.

Optimization of the Guide Design of MIRACLES, the Neutron Time-of-Flight Backscattering Spectrometer at the European Spallation Source

To boost the science case of MIRACLES, the time-of-flight backscattering spectrometer at the European Spallation Source (ESS), an optimized neutron guide system, is proposed. This systematic study resulted in an enhancement in the transport of cold neutrons, compared with the previous conceptual design, with wavelengths ranging from λ = 2 Å to 20 Å along the 162.5-m distance from source to sample. This maintained the undisturbed main focus of the instrument, viz, to carry out quasielastic and inelastic neutron scattering (QENS and INS) experiments on a large dynamic range and for both energy-gain and energy-loss sides. To improve the collection of cold neutrons from the source and direct them to the sample position, the vertical geometry was adjusted to an adapted version of a ballistic elliptical profile. Its horizontal geometry was conceived to: (i) keep the high-resolution performance of the instrument, and (ii) minimize the background originating from fast and thermal neutrons. To comply with the first requirement, a narrow guide section at the pulse shaping chopper position has been implemented. To fulfil the second, a curved guide segment has been chosen to suppress neutrons with wavelengths λ < 2 Å. Subsequent tailoring of the phase space provided an efficient transport of cold neutrons along the beamline to reach a 3 × 3 cm2 sample. Finally, additional calculations were performed to present a potential upgrade, with the exchange of the final segment, to focus on samples of approximately 1 × 1 cm2; the proposal anticipates a flux increase of 70% in this 1 cm2 sample area.

A Possible Neutron-Antineutron Oscillation Experiment at PF1B at the Institut Laue Langevin

We consider a possible neutron–antineutron (n−n¯) oscillation experiment at the PF1B instrument at Institut Laue Langevin. It can improve the best existing constraint on the transition rate and also allow the testing of the methods and instrumentation which would be needed for a later larger-scale experiment at ESS. The main gain factors over the most competitive experiment, performed earlier at PF1 instrument at ILL, are: a more intense neutron beam and a new operating mode based on coherent n and n¯ mirror reflections. The installation of such an experiment would need a temporary replacement of the existing ballistic neutron guide by a specially designed n/n¯ guide with a gradually increasing cross section and a specially selected coating as well as the development and construction of an advanced n¯ annihilation detector with a high efficiency and low background. The overall gain factor could reach up to an order of magnitude and depends on the chosen experiment configuration.

The Neutron Imaging Instrument CONRAD—Post-Operational Review

The neutron imaging instrument CONRAD was operated as a part of the user program of the research reactor BER-II at Helmholtz-Zentrum Berlin (HZB) from 2005 to 2020. The instrument was designed to use the neutron flux from the cold source of the reactor, transported by a curved neutron guide. The pure cold neutron spectrum provided a great advantage in the use of different neutron optical components such as focusing lenses and guides, solid-state polarizers, monochromators and phase gratings. The flexible setup of the instrument allowed for implementation of new methods including wavelength-selective, dark-field, phase-contrast and imaging with polarized neutrons. In summary, these developments helped to attract a large number of scientists and industrial customers, who were introduced to neutron imaging and subsequently contributed to the expansion of the neutron imaging community.

Reactor Kinetics

In static and kinetic experimental analyses, the reactivity effect of introducing a neutron guide has been examined with various materials and adjustments of the beam window. With the objective of improving the KUCA core characteristics, the implementation of the neutron guide is predicted to increase the fast neutrons in directing the fuel region. With regard to the kinetic characteristics, the subcriticality and the prompt neutron decay constant are monitored for several core configurations and detector positions. The KUCA core is equipped to make locally a hard spectrum core region with the combined use of 235U fuel, a polyethylene moderator, and a Pb–Bi reflector for criticality. In this study, the first attempt is made to examine experimentally the characteristics of kinetics parameters in ADS comprised of 235U-fueled and Pb–Bi-zoned core, and spallation neutrons generated by an injection of 100 MeV protons onto the solid Pb–Bi target. Online monitoring of reactivity has been deduced in real time by the inverse kinetic method on the basis of the one-point kinetic equation with measured neutron signals in the core. Here, measurements by the one-point kinetic equation are validated through the subcriticality evaluation with the PNS histogram and the methodology by the inhour equation.