scholarly journals PREDICTION OF WAVE-INDUCED SEAFLOOR MOVEMENTS

1976 ◽  
Vol 1 (15) ◽  
pp. 93 ◽  
Author(s):  
Leland Milo Kraft ◽  
David James Watkins
Keyword(s):  
Cyclic Load ◽  
Offshore Structures ◽  
Foundation Design ◽  
Element Analysis ◽  
Wave Statistics ◽  
Strain Behavior ◽  
Potential Depth ◽  
The Stability ◽  
Wave Induced ◽  
Soil Movements

Foundation design for offshore structures in areas where wave-induced bottom pressures cause submarine mud slides requires a knowledge of the potential depth of slide and of the magnitude and distribution of soil movements below the slide. Several methods have been developed to evaluate the stability of the seafloor due to wave-induced bottom pressures. These methods are reviewed and an improved procedure is presented. This procedure makes use of finite element analysis and combines in a rational manner oceanographic information on wave statistics with stress-strain behavior of soils under cyclic load conditions in order to evaluate the effects of a given storm history on the behavior of submarine sediments.

scholarly journals Neural Networks Applied to the Wave-Induced Fatigue Analysis of Steel Risers

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
João P. R. Cortina ◽  
Fernando J. M. de Sousa ◽  
Luis V. S. Sagrilo
Keyword(s):  
Neural Networks ◽  
Time Series ◽  
Cross Sections ◽  
Computational Cost ◽  
Offshore Structures ◽  
Fatigue Analysis ◽  
Element Analysis ◽  
Long Time ◽  
Wave Induced ◽  
Hybrid Methodology

Time domain stochastic wave dynamic analyses of offshore structures are computationally expensive. Considering the wave-induced fatigue assessment for such structures, the combination of many environmental loading cases and the need of long time-series responses make the computational cost even more critical. In order to reduce the computational burden related to the wave-induced fatigue analysis of Steel Catenary Risers (SCRs), this work presents the application of a recently developed hybrid methodology that combines dynamic Finite Element Analysis (FEA) and Artificial Neural Networks (ANN). The methodology is named hybrid once it requires short time series of structure responses (obtained by FEA) and imposed motions (evaluated analytically) to train an ANN. Subsequently, the ANN is employed to predict the remaining response time series using the prescribed motions imposed at the top of the structure by the floater unit. In this particular work, the methodology is applied aiming to predict the tension and bending moments’ time series at structural elements located at the top region and at the touchdown zone (TDZ) of a metallic riser. With the predicted responses (tensions and moments), the stress time series are determined for eight points along the pipe cross sections, and stress cycles are identified using a Rainflow algorithm. Fatigue damage is then evaluated using SN curves and the Miner-Palmgren damage accumulation rule. The methodology is applied to a SCR connected to a semisubmersible platform in a water depth of 910 m. The obtained results are compared to those from a full FEA in order to evaluate the accuracy and computer efficiency of the hybrid methodology.

scholarly journals Static Behaviors of a Long-span Cable-Stayed Bridge with a Floating Tower under Dead Loads

2020 ◽  
Vol 8 (10) ◽  
pp. 816 ◽  
Author(s):  
Minseo Jang ◽  
Yunwoo Lee ◽  
Deokhee Won ◽  
Young-Jong Kang ◽  
Seungjun Kim
Keyword(s):  
Structural Characteristics ◽  
Load Ratio ◽  
Offshore Structures ◽  
Axial Stiffness ◽  
Outer Diameter ◽  
Element Analysis ◽  
Long Span Bridges ◽  
Long Span ◽  
The Difference ◽  
The Stability

Owing to the structural characteristics of floating-type structures, they can be effectively applied to overcome the limitation of conventional long-span bridges in deep water. Unlike cable-supported bridges with fixed towers, floating cable-supported bridges show relatively large displacements and rotations under the same load because of floating towers; moreover, the difference in the support stiffness causes differences in the behavior of the superstructures. In addition, the risk of overturning is greater than in conventional floating offshore structures because the center of gravity of the tower is located above the buoyancy center of the floater. A floating cable-supported bridge in which the tether supports the floating main tower is directly influenced by the tether arrangement, which is very important for the stability of the entire structure. In this study, according to the inclined tether arrangement, the outer diameter of the floater, and the buoyancy vertical load ratio (BVR), the static behavioral characteristics of the long-span cable-stayed bridges with floating tower are evaluated through nonlinear finite-element analysis. When the intersection of the tension line of the tether and a pivot point of the tower coincide, the tethers can no longer resist the tower’s rotation. For this reason, a large displacement occurs to equilibrate the structure, and further increases as it approaches the specific slope, even if it is not exactly the specific tether slope. The analytical model of this study indicates that, in terms of increasing the rotational stiffness of the main tower, it is advantageous to increase the floater diameter until a BVR of 1.8 is reached and to increase the axial stiffness of the tether from a BVR of 2.0 or higher.

scholarly journals Inlay-Retained Dental Bridges—A Finite Element Analysis

2021 ◽  
Vol 11 (9) ◽  
pp. 3770
Author(s):  
Monica Tatarciuc ◽  
George Alexandru Maftei ◽  
Anca Vitalariu ◽  
Ionut Luchian ◽  
Ioana Martu ◽  
...  
Keyword(s):  
Finite Element ◽  
Young Patients ◽  
Maximum Pressure ◽  
Class Iii ◽  
Element Analysis ◽  
Dental Prostheses ◽  
Abutment Teeth ◽  
Fixed Dental Prostheses ◽  
Implant Therapy ◽  
The Stability

Inlay-retained dental bridges can be a viable minimally invasive alternative when patients reject the idea of implant therapy or conventional retained full-coverage fixed dental prostheses, which require more tooth preparation. Inlay-retained dental bridges are indicated in patients with good oral hygiene, low susceptibility to caries, and a minimum coronal tooth height of 5 mm. The present study aims to evaluate, through the finite element method (FEM), the stability of these types of dental bridges and the stresses on the supporting teeth, under the action of masticatory forces. The analysis revealed the distribution of the load on the bridge elements and on the retainers, highlighting the areas of maximum pressure. The results of our study demonstrate that the stress determined by the loading force cannot cause damage to the prosthetic device or to abutment teeth. Thus, it can be considered an optimal economical solution for treating class III Kennedy edentation in young patients or as a provisional pre-implant rehabilitation option. However, special attention must be paid to its design, especially in the connection area between the bridge elements, because the connectors and the retainers represent the weakest parts.

scholarly journals Comprehensive Wind and Wave Statistics and Extreme Values for Design and Analysis of Marine Structures in the Adriatic Sea

2021 ◽  
Vol 9 (5) ◽  
pp. 522
Author(s):  
Marko Katalinić ◽  
Joško Parunov
Keyword(s):  
Adriatic Sea ◽  
Extreme Values ◽  
Wave Climate ◽  
Offshore Structures ◽  
Model Parameters ◽  
Peak Period ◽  
Significant Wave ◽  
Wave Statistics ◽  
Wave Heights ◽  
Almost All

Wind and waves present the main causes of environmental loading on seagoing ships and offshore structures. Thus, its detailed understanding can improve the design and maintenance of these structures. Wind and wave statistical models are developed based on the WorldWaves database for the Adriatic Sea: for the entire Adriatic Sea as a whole, divided into three regions and for 39 uniformly spaced locations across the offshore Adriatic. Model parameters are fitted and presented for each case, following the conditional modelling approach, i.e., the marginal distribution of significant wave height and conditional distribution of peak period and wind speed. Extreme significant wave heights were evaluated for 20-, 50- and 100-year return periods. The presented data provide a consistent and comprehensive description of metocean (wind and wave) climate in the Adriatic Sea that can serve as input for almost all kind of analyses of ships and offshore structures.

Cord/Rubber Material Properties

1985 ◽  
Vol 58 (4) ◽  
pp. 830-856 ◽  
Author(s):  
R. J. Cembrola ◽  
T. J. Dudek
Keyword(s):  
Finite Element ◽  
Material Model ◽  
Rubber Composites ◽  
Stress Strain ◽  
Element Analysis ◽  
Rubber Layer ◽  
Strain Behavior ◽  
Nonlinear Stress ◽  
Interlaminar Shear ◽  
Mechanics Of Composite Materials

Abstract Recent developments in nonlinear finite element methods (FEM) and mechanics of composite materials have made it possible to handle complex tire mechanics problems involving large deformations and moderate strains. The development of an accurate material model for cord/rubber composites is a necessary requirement for the application of these powerful finite element programs to practical problems but involves numerous complexities. Difficulties associated with the application of classical lamination theory to cord/rubber composites were reviewed. The complexity of the material characterization of cord/rubber composites by experimental means was also discussed. This complexity arises from the highly anisotropic properties of twisted cords and the nonlinear stress—strain behavior of the laminates. Micromechanics theories, which have been successfully applied to hard composites (i.e., graphite—epoxy) have been shown to be inadequate in predicting some of the properties of the calendered fabric ply material from the properties of the cord and rubber. Finite element models which include an interply rubber layer to account for the interlaminar shear have been shown to give a better representation of cord/rubber laminate behavior in tension and bending. The application of finite element analysis to more refined models of complex structures like tires, however, requires the development of a more realistic material model which would account for the nonlinear stress—strain properties of cord/rubber composites.

Stability of offshore structures in shallow water depth

2011 ◽  
Vol 2 (2) ◽  
pp. 320-333
Author(s):  
F. Van den Abeele ◽  
J. Vande Voorde
Keyword(s):  
Shallow Water ◽  
Water Depth ◽  
Fossil Fuels ◽  
Oil And Gas ◽  
Structural Response ◽  
Offshore Structures ◽  
Exploration And Production ◽  
Subsea Pipelines ◽  
Wave Induced ◽  
Shallow Water Depth

The worldwide demand for energy, and in particular fossil fuels, keeps pushing the boundaries of offshoreengineering. Oil and gas majors are conducting their exploration and production activities in remotelocations and water depths exceeding 3000 meters. Such challenging conditions call for enhancedengineering techniques to cope with the risks of collapse, fatigue and pressure containment.On the other hand, offshore structures in shallow water depth (up to 100 meter) require a different anddedicated approach. Such structures are less prone to unstable collapse, but are often subjected to higherflow velocities, induced by both tides and waves. In this paper, numerical tools and utilities to study thestability of offshore structures in shallow water depth are reviewed, and three case studies are provided.First, the Coupled Eulerian Lagrangian (CEL) approach is demonstrated to combine the effects of fluid flowon the structural response of offshore structures. This approach is used to predict fluid flow aroundsubmersible platforms and jack-up rigs.Then, a Computational Fluid Dynamics (CFD) analysis is performed to calculate the turbulent Von Karmanstreet in the wake of subsea structures. At higher Reynolds numbers, this turbulent flow can give rise tovortex shedding and hence cyclic loading. Fluid structure interaction is applied to investigate the dynamicsof submarine risers, and evaluate the susceptibility of vortex induced vibrations.As a third case study, a hydrodynamic analysis is conducted to assess the combined effects of steadycurrent and oscillatory wave-induced flow on submerged structures. At the end of this paper, such ananalysis is performed to calculate drag, lift and inertia forces on partially buried subsea pipelines.

Comparative study of finite element analysis of steel silos with rectangular and I stiffeners

2021 ◽  
Vol 10 (1) ◽  
pp. 9
Author(s):  
Prasad Lakshmi ◽  
Neethu Elsa Anil
Keyword(s):  
Reinforced Concrete ◽  
Element Analysis ◽  
Plate Structures ◽  
Steel Reinforced Concrete ◽  
Wide Range ◽  
Earthquake Load ◽  
The Stability ◽  
Dynamic Loading Conditions ◽  
Steel Silos ◽  
Static And Dynamic Loading

Silos are used by a wide range of industries to store bulk solids in quantities ranging from a few tones to hundreds or thousands of tones. They can be constructed of steel or reinforced concrete. Steel bins range from heavily stiffened flat plate structures to efficient unstiffened shell structures. They can be closed or open. They are subjected to many different static and dynamic loading conditions, mainly due to the unique characteristics of stored materials. Wind and earthquake load often undermine the stability of the silos. A steel silo with and without stiffeners is adopted and static structural analysis and dynamic analysis is done. The analysis is done by idealizing geometry, material and boundary conditions. Keywords: steel, reinforced concrete, silos.

Sail Aero-Structures: Studying Primary Load Paths and Distortion

2005 ◽  
Author(s):  
Robert Ranzenbach ◽  
Zhenlong Xu
Keyword(s):  
Aerodynamic Load ◽  
Element Analysis ◽  
Strain Behavior ◽  
Construction Methods ◽  
Load Paths ◽  
Calculation Results ◽  
Computational Fluid Dynamics Cfd ◽  
Aerodynamic Field ◽  
The Impact ◽  
Primary Load

A method is described to conduct an integrated Fluid-Structure Interaction (FSI) simulation of sails that is based upon knowledge of the sail’s design shape geometry and membrane material properties. A Finite Element Analysis (FEA) of the sail structure and a Computational Fluid Dynamics (CFD) model of the aerodynamic field are combined and iteratively solved to compute the actual flying shape of the sail under aerodynamic load, the stress strain behavior of the sail membrane, the integrated aerodynamic forces produced by the sail such as driving force and heel moment, and the resulting loads on sheets, halyards, etc. An important contribution of this particular method is the incorporation of wrinkling phenomena into the FEA portion of the calculation. Results from a study of working sails for a 30’ MORC racing yacht designed by Nelson-Marek (NM) in the 1990’s are presented and discussed with particular emphasis on the variability of primary load paths with changing trim and sailing conditions as well as the impact of sail deformation in the direction of relatively small stresses that is often poorly addressed in many proprietary sail construction methods.

Parameter Sensitivity in Numerical Modelling of Ice-Structure Interaction With Cohesive Element Method

2016 ◽  
Author(s):  
Dianshi Feng ◽  
Sze Dai Pang ◽  
Jin Zhang
Keyword(s):  
Element Model ◽  
Offshore Structures ◽  
Parameter Sensitivity ◽  
The Arctic ◽  
Cohesive Element ◽  
Structure Interaction ◽  
Marine Structure ◽  
Ice Loads ◽  
The Stability ◽  
Element Method

The increasing marine activities in the Arctic has resulted in a growing demand for reliable structural designs in this region. Ice loads are a major concern to the designer of a marine structure in the arctic, and are often the principal factor that governs the structural design [Palmer and Croasdale, 2013]. With the rapid advancement in computational power, numerical method is becoming a useful tool for design of offshore structures subjected to ice actions. Cohesive element method (CEM), a method which has been widely utilized to simulate fracture in various materials ranging from metals to ceramics and composites as well as bi-material systems, has been recently applied to predict ice-structure interactions. Although it shows promising future for further applications, there are also some challenging issues like high mesh dependency, large variation in cohesive properties etc., yet to be resolved. In this study, a 3D finite element model with the use of CEM was developed in LS-DYNA for simulating ice-structure interaction. The stability of the model was investigated and a parameter sensitivity analysis was carried out for a better understanding of how each material parameter affects the simulation results.

Sign in / Sign up

Export Citation Format

Share Document