scholarly journals Effect of reduced pH on physiology and shell integrity of juvenile Haliotis iris (pāua) from New Zealand

PeerJ ◽  
2019 ◽  
Vol 7 ◽  
pp. e7670
Author(s):  
Vonda J. Cummings ◽  
Abigail M. Smith ◽  
Peter M. Marriott ◽  
Bryce A. Peebles ◽  
N. Jane Halliday
Keyword(s):  
New Zealand ◽  
Ambient Conditions ◽  
X Ray Diffraction ◽  
Shell Quality ◽  
External Shell ◽  
Seawater Ph ◽  
Mollusc Species ◽  
Higher Temperature ◽  
Combination Of Methods ◽  
Carbonate Composition

The New Zealand pāua or black footed abalone, Haliotis iris, is one of many mollusc species at potential risk from ocean acidification and warming. To investigate possible impacts, juvenile pāua (~24 mm shell length) were grown for 4 months in seawater pH/pCO2 conditions projected for 2100. End of century seawater projections (pHT 7.66/pCO2 ~1,000 μatm) were contrasted with local ambient conditions (pHT 8.00/pCO2 ~400 μatm) at two typical temperatures (13 and 15 °C). We used a combination of methods (morphometric, scanning electron microscopy, X-ray diffraction) to investigate effects on juvenile survival and growth, as well as shell mineralogy and integrity. Lowered pH did not affect survival, growth rate or condition, but animals grew significantly faster at the higher temperature. Juvenile pāua were able to biomineralise their inner nacreous aragonite layer and their outer prismatic calcite layer under end-of-century pH conditions, at both temperatures, and carbonate composition was not affected. There was some thickening of the nacre layer in the newly deposited shell with reduced pH and also at the higher temperature. Most obvious was post-depositional alteration of the shell under lowered pH: the prismatic calcite layer was thinner, and there was greater etching of the external shell surface; this dissolution was greater at the higher temperature. These results demonstrate the importance of even a small (2 °C) difference in temperature on growth and shell characteristics, and on modifying the effects at lowered pH. Projected CO2-related changes may affect shell quality of this iconic New Zealand mollusc through etching (dissolution) and thinning, with potential implications for resilience to physical stresses such as predation and wave action.

scholarly journals A unique temperate rocky coastal hydrothermal vent system (Whakaari–White Island, Bay of Plenty, New Zealand): constraints for ocean acidification studies

2020 ◽  
Vol 71 (3) ◽  
pp. 321 ◽  
Author(s):  
R. Zitoun ◽  
S. D. Connell ◽  
C. E. Cornwall ◽  
K. I. Currie ◽  
K. Fabricius ◽  
...  
Keyword(s):  
New Zealand ◽  
Ocean Acidification ◽  
Preliminary Investigation ◽  
Nutrient Concentrations ◽  
Seawater Ph ◽  
Combination Of Methods ◽  
And Control ◽  
Inorganic Ligands ◽  
White Island

In situ effects of ocean acidification are increasingly studied at submarine CO2 vents. Here we present a preliminary investigation into the water chemistry and biology of cool temperate CO2 vents near Whakaari–White Island, New Zealand. Water samples were collected inside three vent shafts, within vents at a distance of 2m from the shaft and at control sites. Vent samples contained both seawater pH on the total scale (pHT) and carbonate saturation states that were severely reduced, creating conditions as predicted for beyond the year 2100. Vent samples showed lower salinities, higher temperatures and greater nutrient concentrations. Sulfide levels were elevated and mercury levels were at concentrations considered toxic at all vent and control sites, but stable organic and inorganic ligands were present, as deduced from Cu speciation data, potentially mediating harmful effects on local organisms. The biological investigations focused on phytoplankton, zooplankton and macroalgae. Interestingly, we found lower abundances but higher diversity of phytoplankton and zooplankton at sites in the direct vicinity of Whakaari. Follow-up studies will need a combination of methods and approaches to attribute observations to specific drivers. The Whakaari vents represent a unique ecosystem with considerable biogeochemical complexity, which, like many other vent systems globally, require care in their use as a model of ‘future oceans’.

scholarly journals One-step synthesis of nitrogen-grafted copper-gallic acid for enhanced methylene blue removal

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shella Permatasari Santoso ◽  
Vania Bundjaja ◽  
Artik Elisa Angkawijaya ◽  
Chintya Gunarto ◽  
Alchris Woo Go ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Gallic Acid ◽  
Synthesis Method ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
One Step ◽  
Detailed Assessment ◽  
Higher Temperature

AbstractNitrogen-grafting through the addition of glycine (Gly) was performed on a metal- phenolic network (MPN) of copper (Cu2+) and gallic acid (GA) to increase its adsorption capacity. Herein, we reported a one-step synthesis method of MPN, which was developed according to the metal–ligand complexation principle. The nitrogen grafted CuGA (Ng-CuGA) MPN was obtained by reacting Cu2+, GA, and Gly in an aqueous solution at a molar ratio of 1:1:1 and a pH of 8. Several physicochemical measurements, such as Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), N2 sorption, X-ray diffraction (XRD), and thermal gravimetry analysis (TGA), were done on Ng-CuGA to elucidate its characteristics. The analysis revealed that the Ng-CuGA has non-uniform spherical shaped morphology with a pore volume of 0.56 cc/g, a pore size of 23.25 nm, and thermal stability up to 205 °C. The applicational potential of the Ng-CuGA was determined based on its adsorption capacity against methylene blue (MB). The Ng-CuGA was able to adsorb 190.81 mg MB per g adsorbent at a pH of 6 and temperature of 30 °C, which is 1.53 times higher than the non-grafted CuGA. Detailed assessment of Ng-CuGA adsorption properties revealed their pH- and temperature-dependent nature. The adsorption capacity and affinity were found to decrease at a higher temperature, demonstrating the exothermic adsorption behavior.

scholarly journals Impact of high temperatures on aluminoceladonite studied by Mössbauer, Raman, X-ray diffraction and X-ray photoelectron spectroscopy

2021 ◽  
Author(s):  
Mariola Kądziołka-Gaweł ◽  
Maria Czaja ◽  
Mateusz Dulski ◽  
Tomasz Krzykawski ◽  
Magdalena Szubka
Keyword(s):  
Photoelectron Spectroscopy ◽  
Integral Intensity ◽  
Photoelectron Spectra ◽  
X Ray Diffraction ◽  
Structural Reorganization ◽  
Oh Groups ◽  
X Ray ◽  
Al Content ◽  
Integral Intensity Ratio ◽  
Higher Temperature

AbstractMössbauer, Raman, X-ray diffraction and X-ray photoelectron spectroscopies were used to examine the effects of temperature on the structure of two aluminoceladonite samples. The process of oxidation of Fe2+ to Fe3+ ions started at about 350 °C for the sample richer in Al and at 300 °C for the sample somewhat lower Al-content. Mössbauer results show that this process may be associated with dehydroxylation or even initiate it. The first stage of dehydroxylation takes place at a temperature > 350 °C when the adjacent OH groups are replaced with a single residual oxygen atom. Up to ~500 °C, Fe ions do not migrate from cis-octahedra to trans-octahedra sites, but the coordination number of polyhedra changes from six to five. This temperature can be treated as the second stage of dehydroxylation. The temperature dependence on the integral intensity ratio between bands centered at ~590 and 705 cm−1 (I590/I705) clearly reflects the temperature at which six-coordinated polyhedra are transformed into five-coordinated polyhedra. X-ray photoelectron spectra obtained in the region of the Si2p, Al2p, Fe2p, K2p and O1s core levels, highlighted a route to identify the position of Si, Al, K and Fe cations in a structure of layered silicates with temperature. All the measurements show that the sample with a higher aluminum content and a lower iron content in octahedral sites starts to undergo a structural reorganization at a relatively higher temperature than the less aluminum-rich sample does. This suggests that iron may perform an important role in the initiation of the dehydroxylation of aluminoceladonites.

Preparation and Characrization of Tic/C Composite Fiber by Chemical Vapor Deposition

2012 ◽  
Vol 455-456 ◽  
pp. 935-938
Author(s):  
Hai Quan Wang
Keyword(s):  
Chemical Vapor Deposition ◽  
Carbon Fibers ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Composite Fiber ◽  
Composite Fibers ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
Tic Particle ◽  
Higher Temperature

- TiC/C composite fibers were prepared by vapor phase titanizing of the regular carbon fibers via chemical vapor deposition (CVD). The carbon fibers were titanized from the surface of the fiber to the core. Scanning electron microscope (SEM) and X-ray diffraction (XRD) were applied to characterize the morphology and structure of the TiC/C composite fibers. The influences of CVD reaction conditions such as temperature and reaction time on the TiC particle size and the thickness of the deposited layer were investigated. Higher temperature and longer time resulted in the growth of bigger size of the TiC crystal particles, and the particle uniformity was also decreased.

Study of Low-Grade Nickel Laterite Processing Using Palm Shell Charcoal as Reductant

2020 ◽  
Vol 1000 ◽  
pp. 436-446
Author(s):  
Bambang Suharno ◽  
Nolzha Primadha Ilman ◽  
Achmad Shofi ◽  
Deni Ferdian ◽  
Fajar Nurjaman
Keyword(s):  
Sodium Sulfate ◽  
Selective Reduction ◽  
Reduction Process ◽  
Low Grade ◽  
X Ray Diffraction ◽  
X Ray ◽  
Palm Shell ◽  
Higher Temperature ◽  
Nickel Grade

This study was conducted to investigate the effect of palm shell charcoal reductant in the selective reduction of nickel ore with the addition of additive at various temperatures and times. In this present work, 10 wt. % of sodium sulfate as additive and 5, 10, 15 wt. % of palm shell charcoal as reductants were used. The reduction of nickel ore was performed at 950oC, 1050oC, and 1150oC for 60, 90, and 120 minutes. A wet magnetic separation method was then carried out to separate the concentrates and tailings. Characterization of reduced ore was performed by X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM) with Energy Dispersive X-ray Spectroscopy (EDS), while the composition of ferronickel in concentrate was identified by X-Ray Fluorescence (XRF). The result showed that the higher temperature reduction, the higher of nickel grade, and its recovery at the concentrate. Nevertheless, the longer reduction time and the more reductant in nickel ore lowering the nickel grade and its recovery in the concentrate. The optimum condition in this selective reduction process was obtained with the addition of 5 wt. % of reductant and 10 wt. % of sodium sulfate in nickel ore, which was reduced at 1150oC for 60 minutes. It resulted in 4.60% and 73.23% for nickel grade and its recovery, respectively.

scholarly journals Discovery of Fe7O9: a new iron oxide with a complex monoclinic structure

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Ryosuke Sinmyo ◽  
Elena Bykova ◽  
Sergey V. Ovsyannikov ◽  
Catherine McCammon ◽  
Ilya Kupenko ◽  
...  
Keyword(s):  
Applied Sciences ◽  
Crystal Structure ◽  
Iron Oxide ◽  
Iron Oxides ◽  
Industrial Applications ◽  
Ambient Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Pressure High Temperature ◽  
Insight Into

Abstract Iron oxides are fundamentally important compounds for basic and applied sciences as well as in numerous industrial applications. In this work we report the synthesis and investigation of a new binary iron oxide with the hitherto unknown stoichiometry of Fe7O9. This new oxide was synthesized at high-pressure high-temperature (HP-HT) conditions, and its black single crystals were successfully recovered at ambient conditions. By means of single crystal X-ray diffraction we determined that Fe7O9 adopts a monoclinic C2/m lattice with the most distorted crystal structure among the binary iron oxides known to date. The synthesis of Fe7O9 opens a new portal to exotic iron-rich (M,Fe)7O9 oxides with unusual stoichiometry and distorted crystal structures. Moreover, the crystal structure and phase relations of such new iron oxide groups may provide new insight into the cycling of volatiles in the Earth’s interior.

Crystal structures of highly stabilized ylides: methyl(3-methoxy,2-methoxycarbonylbenzoyl) triphenyl- phosphoranylideneacetate and methyl(2-methoxycarb-6-nitrobenzoyl)triphenyl phos phoranyl ideneacetate and the salt methyl(triphenylphosphoranylidene)acetate tetrafluoroborate

1998 ◽  
Vol 76 (12) ◽  
pp. 1844-1852
Author(s):  
Fernande D Rochon ◽  
Robert Melanson ◽  
Margaret M Kayser
Keyword(s):  
Key Words ◽  
Crystal Structures ◽  
Nitro Derivative ◽  
Transient Species ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ionic Salt ◽  
Higher Temperature ◽  
Cyclic Anhydrides ◽  
Wittig Reactions

At lower temperatures stabilized ylides react with unsymmetrically substituted phthalic anhydrides to give two acyclic adducts. When the reactions are allowed to proceed at higher temperature enol lactones are formed. Identification of the acyclic intermediates was necessary to understand the mechanism of these Wittig reactions. The transient species trapped in the reaction with trimethyloxonium tetrafluoroborate were unambiguously identified by crystallographic methods. The crystal structures of the tetrafluoroborate salt of methyl(triphenylphosphoranyl idene)- acetate (8), methyl(3-methoxy,2-methoxycarbonylbenzoyl)triphenylphosphoranylideneacetate (6β), and methyl(2-methoxycarbonyl,6-nitrobenzoyl)triphenylphosphoranylideneacetate (7α) were studied by X-ray diffraction. The ionic salt (8) is monoclinic, P21c,a= 12.640(5), b = 13.945(9), c = 14.825(6) Å, β = 125.32(3)°, Z = 4, and R = 0.065 (F >5.4 σ(F)). Crystal 6 β is monoclinic, P21c,a = 16.391(16), b = 9.029(6), c = 19.835(19) Å, β = 116.60(6)°, Z = 4, and R = 0.070 (F > 4.6 σ(F)), while crystal 7α is also monoclinic, P21c,a = 9.513(5), b = 9.361(3), c = 30.908(13) Å, β = 98.42(3)°, Z = 4, and R = 0.057 (F >5 σ(F)). In the BF 4- salt (12), the four P-C distances are equal (1.791(5)-1.801(7) Å) with identical tetrahedral angles. For the two triphenylphosphoranylideneacetate compounds, the fourth P-C(1) bond is shorter (1.762(6)-1.734(5) Å) than the three P-C(Ph) bonds (avg. 1.809(5) Å). The angles C(1)-P-C(Ph) are also larger (avg. 112.9(2)° for 6β and 111.9(2)° for 7α) than the C(Ph)-P-C(Ph) angles (avg. 105.8(2)° for 6 β and 106.9(2)° for 7α). These values suggest a multiple nature for the P-C(1) bond. In the nitro derivative, the nitro and the ester groups are disordered equally in positions 2 and 6. Key words: Wittig reactions, cyclic anhydrides, stabilized ylide, phosphoranylidenes, crystal structures.

Effect of NABr on the Pore Size and Surface Morphology of Cu Foam Prepared by Hydrogen Bubble Templating

2021 ◽  
Vol 880 ◽  
pp. 83-88
Author(s):  
Mary Donnabelle L. Balela ◽  
Reginald E. Masirag ◽  
Francis O. Pacariem Jr. ◽  
Juicel Marie D. Taguinod
Keyword(s):  
Polyethylene Glycol ◽  
Cuprous Oxide ◽  
Active Material ◽  
Current Collector ◽  
Hydrogen Bubble ◽  
Ambient Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Foam ◽  
Interconnected Pores

Binderless supercapacitor electrodes are currently being employed to increase the surface contact between the active material and current collector, leading to enhanced capacitance. In binderless electrodes, the active material is directly grown on the surface of the current collector, omitting the use of insulative polymer-based binders. In this work, Cu foam was successfully electrodeposited on Cu sheet by dynamic hydrogen bubble templating (DHBT) using polyethylene glycol (PEG) and sodium bromide (NaBr) as additives. The current density was set at 3 A·cm-2 and electrodeposition was performed for 20 s. At 200 mg/L PEG, increasing the NaBr concentration from 0 to 80 mM produced Cu foam with decreasing pores sizes of about 75.15 to 34.10 μm. However, the walls of the interconnected pores became thicker as the pore diameters were reduced. This indicates that NaBr promotes Cu deposition rather than hydrogen evolution reaction (HER), leading to smaller pore sizes. X-ray diffraction confirms the oxidation of the Cu foam under ambient conditions forming cuprous oxide (Cu2O). The Cu2O/Cu foam was then utilized as binderless electrode for supercapacitor, resulting to a specific capacitance of 0.815 F·cm-2 at 5 mV·s-1. Results show the potential of the fabricated Cu2O/Cu foam as binderless electrode for pseudo-type supercapacitors.

Occurrence and characterization of pearls from oysters of the genus Crassostrea

2016 ◽  
Vol 97 (2) ◽  
pp. 297-302
Author(s):  
Frederico M. Batista ◽  
Ana Grade ◽  
Deborah M. Power ◽  
Francisco Ruano ◽  
Elizabeth M. Harper
Keyword(s):  
Oyster Shell ◽  
X Ray Diffraction ◽  
Parasitic Copepods ◽  
Ria Formosa ◽  
Crassostrea Angulata ◽  
Mollusc Species ◽  
Southern Portugal ◽  
Foot Disease ◽  
The Right ◽  
Almost All

The occurrence of pearls in the ‘true’ oysters, the Ostreioidea, is poorly documented despite being the most produced mollusc species in the world. Oysters of the Crassostrea genus were collected in two different sites in southern Portugal where both Crassostrea angulata and C. gigas are present, namely in: (1) the Ria Formosa lagoon where pearls were not observed (N = 446); and (2) the Guadiana estuary where pearls were found in 12 out of the 798 oysters analysed. The pearls were located mainly at the edge of the right mantle lobe in the inhalant chamber and their maximum length ranged from 0.9 to 5.5 mm. Almost all the pearls had a white-cream colouration with the exception of two pearls that had a black-brown colour. X-ray diffraction analysis of one pearl showed that it was entirely calcitic with no traces of either aragonite or vaterite. The pearls observed were therefore non-nacreous pearls. Scanning electron microscopy (SEM) revealed a diversity of microstructures including prismatic, foliae-like sheets and blocky textures, i.e. highly reminiscent of the host oyster shell microstructures. Parasites (e.g. parasitic copepods, Haplosporidium-like plasmodia) and signs of diseases (e.g. foot disease) were observed in some of the oysters analysed, but they were not associated with the occurrence of pearls. The present work is one of the few studies on the occurrence of natural pearls in ‘true’ oysters and to our knowledge the first description of their microstructure by SEM.

Sign in / Sign up

Export Citation Format

Share Document