scholarly journals A wavelet-based decomposition method for a robust extraction of pulse rate from video recordings

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e5859 ◽  
Author(s):  
Miha Finžgar ◽  
Primož Podržaj

Background Remote photoplethysmography (rPPG) is a promising optical method for non-contact assessment of pulse rate (PR) from video recordings. In order to implement the method in real-time applications, it is necessary for the rPPG algorithms to be capable of eliminating as many distortions from the pulse signal as possible. Methods In order to increase the degrees-of-freedom of the distortion elimination, the dimensionality of the RGB video signals is increased by the wavelet transform decomposition using the generalized Morse wavelet. The proposed Continuous-Wavelet-Transform-based Sub-Band rPPG method (SB-CWT) is evaluated on the 101 publicly available RGB facial video recordings and corresponding reference blood volume pulse (BVP) signals taken from the MMSE-HR database. The performance of the SB-CWT is compared with the performance of the state-of-the-art Sub-band rPPG (SB). Results Median signal-to-noise ratio (SNR) for the proposed SB-CWT ranges from 6.63 to 10.39 dB and for the SB from 4.23 to 6.24 dB. The agreement between the estimated PRs from rPPG pulse signals and the reference signals in terms of the coefficients of determination ranges from 0.81 to 0.91 for SB-CWT and from 0.41 to 0.47 for SB. All the correlation coefficients are statistically significant (p < 0.001). The Bland–Altman plots show that mean difference range from 5.37 to 1.82 BPM for SB-CWT and from 22.18 to 18.80 BPM for SB. Discussion The results show that the proposed SB-CWT outperforms SB in terms of SNR and the agreement between the estimated PRs from RGB video signals and PRs from the reference BVP signals.

Sensors ◽  
2021 ◽  
Vol 21 (18) ◽  
pp. 6241
Author(s):  
Su-Gyeong Yu ◽  
So-Eui Kim ◽  
Na Hye Kim ◽  
Kun Ha Suh ◽  
Eui Chul Lee

Pulse rate variability (PRV) refers to the change in the interval between pulses in the blood volume pulse (BVP) signal acquired using photoplethysmography (PPG). PRV is an indicator of the health status of an individual’s autonomic nervous system. A representative method for measuring BVP is contact PPG (CPPG). CPPG may cause discomfort to a user, because the sensor is attached to the finger for measurements. In contrast, noncontact remote PPG (RPPG) extracts BVP signals from face data using a camera without the need for a sensor. However, because the existing RPPG is a technology that extracts a single pulse rate rather than a continuous BVP signal, it is difficult to extract additional health status indicators. Therefore, in this study, PRV analysis is performed using lab-based RPPG technology that can yield continuous BVP signals. In addition, we intended to confirm that the analysis of PRV via RPPG can be performed with the same quality as analysis via CPPG. The experimental results confirmed that the temporal and frequency parameters of PRV extracted from RPPG and CPPG were similar. In terms of correlation, the PRVs of RPPG and CPPG yielded correlation coefficients between 0.98 and 1.0.


2019 ◽  
Vol 59 (6) ◽  
pp. 2318-2327 ◽  
Author(s):  
Mohammad Reza Askari ◽  
Mudassir Rashid ◽  
Mert Sevil ◽  
Iman Hajizadeh ◽  
Rachel Brandt ◽  
...  

Author(s):  
Sediqeh Samadi ◽  
Mudassir Rashid ◽  
Mohammad Reza Askari ◽  
Shahineze Saada ◽  
Paul Kolodziej ◽  
...  

Author(s):  
BO LE ◽  
ZHONG LIU ◽  
TIANXIANG GU

A new method for detecting weak linear frequency modulated (LFM) pulse signals buried in additive white Gaussian noise (AWGN) is presented in this paper. The method is based on the features of wavelet transform modulus maxima (WTMM) denoising and auto-correlation filtering theory. Firstly, the frequency-domain information is extracted by auto-correlation matched filtering, and is used to deduce the optimal wavelet decomposition scales. Secondly, let the signal modulus dominate on the biggest scale after the optimal scales decomposition, then keeping the signal modulus and removing the noise modulus at each scale are performed by utilizing the different propagation properties of signal and noise wavelet modulus maxima across the scales. Finally, a reconstructed signal is obtained from the reserved signal modulus with an improved signal-to-noise ratio (SNR), and is used for time-domain information extraction. At the same time, wavelet denoising depends on selecting an optimum wavelet that matches well the shape of the signal. The cross correlation coefficients between signal and db wavelets are calculated and the optimal wavelet to analysis the LFM signal is selected. Simulations show that the method can extract time-frequency information of LFM signal when SNR ≤ -6 dB .


Biofeedback ◽  
2010 ◽  
Vol 38 (1) ◽  
pp. 19-23 ◽  
Author(s):  
Erik Peper ◽  
Fred Shaffer ◽  
I-Mei Lin

Abstract Blood volume pulse is a popular method for monitoring the relative changes in peripheral blood flow, heart rate, and heart rate variability. This article stresses the danger of blindly interpreting measures like heart rate, which are derived from blood volume pulse, without close inspection of the raw blood volume pulse signal. The authors identify common sources of signal contamination and recommend practical precautions and treatment of artifacts.


2014 ◽  
Vol 14 ◽  
pp. 217-227 ◽  
Author(s):  
Wahida Handouzi ◽  
Choubeila Maaoui ◽  
Alain Pruski ◽  
Abdelhak Moussaoui

2020 ◽  
Vol 64 (1-4) ◽  
pp. 431-438
Author(s):  
Jian Liu ◽  
Lihui Wang ◽  
Zhengqi Tian

The nonlinearity of the electric vehicle DC charging equipment and the complexity of the charging environment lead to the complex and changeable DC charging signal of the electric vehicle. It is urgent to study the distortion signal recognition method suitable for the electric vehicle DC charging. Focusing on the characteristics of fundamental and ripple in DC charging signal, the Kalman filter algorithm is used to establish the matrix model, and the state variable method is introduced into the filter algorithm to track the parameter state, and the amplitude and phase of the fundamental waves and each secondary ripple are identified; In view of the time-varying characteristics of the unsteady and abrupt signal in the DC charging signal, the stratification and threshold parameters of the wavelet transform are corrected, and a multi-resolution method is established to identify and separate the unsteady and abrupt signals. Identification method of DC charging distortion signal of electric vehicle based on Kalman/modified wavelet transform is used to decompose and identify the signal characteristics of the whole charging process. Experiment results demonstrate that the algorithm can accurately identify ripple, sudden change and unsteady wave during charging. It has higher signal to noise ratio and lower mean root mean square error.


2013 ◽  
Vol 11 (1) ◽  
pp. 8-13
Author(s):  
V. Behar ◽  
V. Bogdanova

Abstract In this paper the use of a set of nonlinear edge-preserving filters is proposed as a pre-processing stage with the purpose to improve the quality of hyperspectral images before object detection. The capability of each nonlinear filter to improve images, corrupted by spatially and spectrally correlated Gaussian noise, is evaluated in terms of the average Improvement factor in the Peak Signal to Noise Ratio (IPSNR), estimated at the filter output. The simulation results demonstrate that this pre-processing procedure is efficient only in case the spatial and spectral correlation coefficients of noise do not exceed the value of 0.6


Sign in / Sign up

Export Citation Format

Share Document