scholarly journals An LED-based multi-actinic illumination system for the high throughput study of photosynthetic light responses

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e5589
Author(s):  
João Serôdio ◽  
William Schmidt ◽  
Jörg C. Frommlet ◽  
Gregor Christa ◽  
Matthew R. Nitschke

The responses of photosynthetic organisms to light stress are of interest for both fundamental and applied research. Functional traits related to the photoinhibition, the light-induced loss of photosynthetic efficiency, are particularly interesting as this process is a key limiting factor of photosynthetic productivity in algae and plants. The quantitative characterization of light responses is often time-consuming and calls for cost-effective high throughput approaches that enable the fast screening of multiple samples. Here we present a novel illumination system based on the concept of ‘multi-actinic imaging’ of in vivo chlorophyll fluorescence. The system is based on the combination of an array of individually addressable low power RGBW LEDs and custom-designed well plates, allowing for the independent illumination of 64 samples through the digital manipulation of both exposure duration and light intensity. The illumination system is inexpensive and easily fabricated, based on open source electronics, off-the-shelf components, and 3D-printed parts, and is optimized for imaging of chlorophyll fluorescence. The high-throughput potential of the system is illustrated by assessing the functional diversity in light responses of marine macroalgal species, through the fast and simultaneous determination of kinetic parameters characterizing the response to light stress of multiple samples. Although the presented illumination system was primarily designed for the measurement of phenotypic traits related to photosynthetic activity and photoinhibition, it can be potentially used for a number of alternative applications, including the measurement of chloroplast phototaxis and action spectra, or as the basis for microphotobioreactors.

Blood ◽  
2018 ◽  
Vol 132 (Supplement 1) ◽  
pp. 949-949 ◽  
Author(s):  
Adam S Sperling ◽  
Michael Burgess ◽  
Hasmik Keshishian ◽  
Jessica Gasser ◽  
Max Jan ◽  
...  

Abstract Pharmacologic agents that induce protein degradation represent an emerging and important class of therapeutic agents. Thalidomide and thalidomide derivatives (TDs) function by bringing target proteins and the E3 ubiquitin ligase substrate adaptor CRBN into proximity leading to ubiquitination and proteasomal degradation of critical oncoproteins. While highly effective, most patients eventually develop resistance to these agents, though the mechanisms by which this occurs and why some patients respond to different drugs within the class remains largely unknown. One major impediment to monitoring these drugs' activity is the need to quantitatively measure multiple protein targets simultaneously. To overcome this issue, we have developed a novel targeted mass spectrometry (MS) assay to measure the levels of CRBN, 8 substrate proteins that are degraded in the presence of TDs (IKZF1, IKZF3, CK1α, ZFP91, RNF166, ZNF692, GSPT1 and GSPT2), and 2 housekeeping control proteins (β-actin and GAPDH). This assay exhibits several advantages over currently used methodologies in that it is quantitatively precise and multiplexed for high throughput, allowing for sensitive detection of a panel of proteins from a single sample. The precision of quantitation of our MS assay enabled us to investigate the relationship between substrate level and drug-mediated degradation by measuring all known substrates in dense time course experiments following treatment of MM1S cells with lenalidomide. These experiments revealed that substrates are degraded in an ordered fashion with IKZF1 and IKZF3 being degraded before CK1α and ZFP91, suggesting that substrates may compete for access to CRBN. To test this directly we overexpressed either RNF166 or ZNF692, two recently identified substrates, in MM1S cells, which led to lenalidomide resistance. This resistance was not mediated by any direct cellular dependence on these proteins but instead was due to their competition for binding to CRBN leading to diminished degradation of other essential lenalidomide targets, IKZF1, IKZF3, and CK1α. Thus, increased expression of proteins capable of interacting with CRBN represents a novel potential mechanism of resistance to this class of drugs. CRBN is essential for lenalidomide-mediated degradation of substrates and sensitivity to drug. Quantitative detection of CRBN in our MS assay enabled us to study the effect of changes in CRBN levels on the activity of TDs. Loss of CRBN led to decreased degradation of all substrates and resistance, whereas overexpression of CRBN augmented degradation of all substrates leading to increased sensitivity to lenalidomide in MM1S cells. In a panel of ten MM cell lines CRBN level correlated with increased substrate degradation and was a significant determinant of differential sensitivity to lenalidomide. These findings demonstrate that CRBN is a limiting factor for both degradation of substrates and sensitivity to TDs. Finally, we took advantage of the high throughput nature of our MS assay and generated dense dose response and kinetic curves for 3 additional TDs (pomalidomide, avadomide and CC-885) in MM1S cells. By combining this with in vivo binding data we have created a detailed map of substrate binding, degradation and order of interaction for each TD. Among other findings, these data demonstrate that lenalidomide differs from pomalidomide and avadomide in that it is a superior degrader of CK1α but inferior at degrading IKZF3 and ZFP91, features that likely underlie some of the differential clinical activity and disease specificity of these agents. In sum, we have developed a highly sensitive, multiplexed quantitative MS assay allowing us to characterize the biochemical activity of TDs in unprecedented detail. Using this assay we show that substrates compete for access to a limiting pool of CRBN and identify a novel mechanism of resistance. The modularity of our assay allows for the detection of new substrates as they are discovered or reconfiguration of the assay to study other degraders. Future translation of this assay to clinical samples will facilitate accurate monitoring of pharmacodynamic activity and elucidation of mechanisms of resistance in vivo. Disclosures Munshi: OncoPep: Other: Board of director.


Author(s):  
Gustav Ofosu

Platinum-thymine has been found to be a potent antitumor agent, which is quite soluble in water, and lack nephrotoxicity as the dose-limiting factor. The drug has been shown to interact with DNA and inhibits DNA, RNA and protein synthesis in mammalian cells in vitro. This investigation was undertaken to elucidate the cytotoxic effects of piatinum-thymine on sarcoma-180 cells in vitro ultrastructurally, Sarcoma-180 tumor bearing mice were treated with intraperitoneal injection of platinum-thymine 40mg/kg. A concentration of 60μg/ml dose of platinum-thymine was used in in vitro experiments. Treatments were at varying time intervals of 3, 7 and 21 days for in vivo experiments, and 30, 60 and 120 min., 6, 12, and 24th in vitro. Controls were not treated with platinum-thymine.Electron microscopic analyses of the treated cells in vivo and in vitro showed drastic cytotoxic effect.


2020 ◽  
Vol 55 (1) ◽  
pp. 27-34
Author(s):  
G. Zadehdabagh ◽  
K. Karimi ◽  
M. Rezabaigi ◽  
F. Ajamgard

The northern of Khuzestan province in Iran is mainly considered as one of the major areas of miniature rose production. Blossom blight caused by Botrytis cinerea has recently become a serious limiting factor in rose production in pre and post-harvest. In current study, an attempt was made to evaluate the inhibitory potential of some local Trichoderma spp. strains against B. cinerea under in vitro and in vivo conditions. The in vitro results showed that all Trichoderma spp. strains were significantly able to reduce the mycelial growth of the pathogen in dual culture, volatile and non-volatile compounds tests compared with control, with superiority of T. atroviride Tsafi than others. Under in vivo condition, the selected strain of T. atroviride Tsafi had much better performance than T. harzianum IRAN 523C in reduction of disease severity compared with the untreated control. Overall, the findings of this study showed that the application of Trichoderma-based biocontrol agents such as T. atroviride Tsafi can be effective to protect cut rose flowers against blossom blight.


1993 ◽  
Vol 28 (6) ◽  
pp. 29-33 ◽  
Author(s):  
V. Vyhnálek ◽  
Z. Fišar ◽  
A. Fišarová ◽  
J. Komárková

The in vivo fluorescence of chlorophyll a was measured in samples of natural phytoplankton taken from the Římov Reservoir (Czech Republic) during the years 1987 and 1988. The fluorescence intensities of samples either with or without addition of 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron, DCMU) were found reliable for calculating the concentration of chlorophyll a during periods when cyanobacteria were not abundant. The correction for background non-chlorophyll fluorescence appeared to be essential. No distinct correlation between a DCMU-induced increase of the fluorescence and primary production of phytoplankton was found.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhou Fang ◽  
Junjian Chen ◽  
Ye Zhu ◽  
Guansong Hu ◽  
Haoqian Xin ◽  
...  

AbstractPeptides are widely used for surface modification to develop improved implants, such as cell adhesion RGD peptide and antimicrobial peptide (AMP). However, it is a daunting challenge to identify an optimized condition with the two peptides showing their intended activities and the parameters for reaching such a condition. Herein, we develop a high-throughput strategy, preparing titanium (Ti) surfaces with a gradient in peptide density by click reaction as a platform, to screen the positions with desired functions. Such positions are corresponding to optimized molecular parameters (peptide densities/ratios) and associated preparation parameters (reaction times/reactant concentrations). These parameters are then extracted to prepare nongradient mono- and dual-peptide functionalized Ti surfaces with desired biocompatibility or/and antimicrobial activity in vitro and in vivo. We also demonstrate this strategy could be extended to other materials. Here, we show that the high-throughput versatile strategy holds great promise for rational design and preparation of functional biomaterial surfaces.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Woo Seok Kim ◽  
Sungcheol Hong ◽  
Milenka Gamero ◽  
Vivekanand Jeevakumar ◽  
Clay M. Smithhart ◽  
...  

AbstractThe vagus nerve supports diverse autonomic functions and behaviors important for health and survival. To understand how specific components of the vagus contribute to behaviors and long-term physiological effects, it is critical to modulate their activity with anatomical specificity in awake, freely behaving conditions using reliable methods. Here, we introduce an organ-specific scalable, multimodal, wireless optoelectronic device for precise and chronic optogenetic manipulations in vivo. When combined with an advanced, coil-antenna system and a multiplexing strategy for powering 8 individual homecages using a single RF transmitter, the proposed wireless telemetry enables low cost, high-throughput, and precise functional mapping of peripheral neural circuits, including long-term behavioral and physiological measurements. Deployment of these technologies reveals an unexpected role for stomach, non-stretch vagal sensory fibers in suppressing appetite and demonstrates the durability of the miniature wireless device inside harsh gastric conditions.


2021 ◽  
Vol 108 (Supplement_1) ◽  
Author(s):  
MI Khot ◽  
M Levenstein ◽  
R Coppo ◽  
J Kondo ◽  
M Inoue ◽  
...  

Abstract Introduction Three-dimensional (3D) cell models have gained reputation as better representations of in vivo cancers as compared to monolayered cultures. Recently, patient tumour tissue-derived organoids have advanced the scope of complex in vitro models, by allowing patient-specific tumour cultures to be generated for developing new medicines and patient-tailored treatments. Integrating 3D cell and organoid culturing into microfluidics, can streamline traditional protocols and allow complex and precise high-throughput experiments to be performed with ease. Method Patient-derived colorectal cancer tissue-originated organoidal spheroids (CTOS) cultures were acquired from Kyoto University, Japan. CTOS were cultured in Matrigel and stem-cell media. CTOS were treated with 5-fluorouracil and cytotoxicity evaluated via fluorescent imaging and ATP assay. CTOS were embedded, sectioned and subjected to H&E staining and immunofluorescence for ABCG2 and Ki67 proteins. HT29 colorectal cancer spheroids were produced on microfluidic devices using cell suspensions and subjected to 5-fluorouracil treatment via fluid flow. Cytotoxicity was evaluated through fluorescent imaging and LDH assay. Result 5-fluorouracil dose-dependent reduction in cell viability was observed in CTOS cultures (p<0.01). Colorectal CTOS cultures retained the histology, tissue architecture and protein expression of the colonic epithelial structure. Uniform 3D HT29 spheroids were generated in the microfluidic devices. 5-fluorouracil treatment of spheroids and cytotoxic analysis was achieved conveniently through fluid flow. Conclusion Patient-derived CTOS are better complex models of in vivo cancers than 3D cell models and can improve the clinical translation of novel treatments. Microfluidics can streamline high-throughput screening and reduce the practical difficulties of conventional organoid and 3D cell culturing. Take-home message Organoids are the most advanced in vitro models of clinical cancers. Microfluidics can streamline and improve traditional laboratory experiments.


Sign in / Sign up

Export Citation Format

Share Document