scholarly journals Research progress of monolayer two-dimensional atomic crystal materials grown by molecular beam epitaxy in ultra-high vacuum conditions

2020 ◽  
Vol 69 (11) ◽  
pp. 118101
Author(s):  
Xing-Yue Wang ◽  
Hui Zhang ◽  
Zi-Lin Ruan ◽  
Zhen-Liang Hao ◽  
Xiao-Tian Yang ◽  
...  
Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove ◽  
R. T. Tung

The cobalt disilicide/silicon system has potential applications as a metal-base and as a permeable-base transistor. Although thin, low defect density, films of CoSi2 on Si(111) have been successfully grown, there are reasons to believe that Si(100)/CoSi2 may be better suited to the transmission of electrons at the silicon/silicide interface than Si(111)/CoSi2. A TEM study of the formation of CoSi2 on Si(100) is therefore being conducted. We have previously reported TEM observations on Si(111)/CoSi2 grown both in situ, in an ultra high vacuum (UHV) TEM and ex situ, in a conventional Molecular Beam Epitaxy system.The procedures used for the MBE growth have been described elsewhere. In situ experiments were performed in a JEOL 200CX electron microscope, extensively modified to give a vacuum of better than 10-9 T in the specimen region and the capacity to do in situ sample heating and deposition. Cobalt was deposited onto clean Si(100) samples by thermal evaporation from cobalt-coated Ta filaments.


1987 ◽  
Vol 102 ◽  
Author(s):  
M. Cerullo ◽  
Julia M. Phillips ◽  
M. Anzlowar ◽  
L. Pfeiffer ◽  
J. L. Batstone ◽  
...  

ABSTRACTA new in-situ rapid thermal annealing (RTA) apparatus which can be used to anneal entire wafers in an ultra high vacuum environment has been designed to be used in conjunction with the epitaxial growth of heterostructures. Drastic improvement in the crystallinity of CaF2/Si(100) can be achieved with RTA, and our results suggest that RTA can be used as an on-line processing technique for novel epitaxial structures.


2004 ◽  
Vol 16 (33) ◽  
pp. S3451-S3458 ◽  
Author(s):  
R Macovez ◽  
C Cepek ◽  
M Sancrotti ◽  
A Goldoni ◽  
L Petaccia ◽  
...  

2002 ◽  
Vol 715 ◽  
Author(s):  
D. J. Lockwood ◽  
J.-M. Baribeau ◽  
M. Noël ◽  
J. C. Zwinkels ◽  
B. J. Fogal ◽  
...  

AbstractWe produce a novel form of amorphous silicon through ultra-high-vacuum molecular beam epitaxy. By depositing silicon atoms onto a fused quartz substrate at temperatures between 98 and 335°C, we obtain a silicon-based material that lacks the characteristic periodicity of crystalline silicon but nevertheless has 98% of its density. The impurity content of this material is studied through infrared and secondary ion mass spectroscopies. The primary impurity found is oxygen, with hydrogen and carbon atoms also being found at trace levels. The Raman spectra of the amorphous silicon films are measured and the results, as they relate to the presence of disorder, are interpreted. We also use this molecular beam epitaxy method to fabricate a number of amorphous silicon superlattices, comprised of thin layers of amorphous silicon separated with even thinner layers of SiO2. The optical properties of the films and superlattices are contrasted.


RSC Advances ◽  
2015 ◽  
Vol 5 (107) ◽  
pp. 87818-87830 ◽  
Author(s):  
S. S. Kushvaha ◽  
M. Senthil Kumar ◽  
A. K. Shukla ◽  
B. S. Yadav ◽  
Dilip K. Singh ◽  
...  

We have grown homoepitaxial GaN nanowall networks on GaN template using an ultra-high vacuum laser assisted molecular beam epitaxy system by ablating solid GaN target under a constant r.f. nitrogen plasma ambient.


1997 ◽  
Vol 117-118 ◽  
pp. 484-488 ◽  
Author(s):  
Hyun-Chul Ko ◽  
Doo-Cheol Park ◽  
Yoichi Kawakami ◽  
Shizuo Fujita ◽  
Shigeo Fujita

1987 ◽  
Vol 65 (8) ◽  
pp. 904-908 ◽  
Author(s):  
W. T. Moore ◽  
R. L. S. Devine ◽  
P. Maigné ◽  
D. C. Houghton ◽  
J.-M. Baribeau ◽  
...  

The growth of GaAs on Si(100) directly and with Ge buffer layers has been carried out sequentially under ultra high vacuum conditions in a double-ended III–V and group IV molecular beam epitaxy system. These heterostructures were examined by cross-section transverse emission microscopy, Rutherford backscattering, X-ray diffraction, and photoluminescence spectroscopy.Dislocation densities were observed to be high [Formula: see text] near both the GaAs–Si and the Ge–Si interfaces and to decrease to ~5 × 108 cm−2 a few micrometres from these interfaces. No dislocations were observed to originate at the GaAs–Ge interface, but the threading dislocations existing in the Ge buffer layer were found to propagate across this interface without significant deviation. The crystalline quality of the GaAs grown on Ge buffer layers was comparable with that grown on Si directly. However, GaAs has not yet been grown on the highest quality Ge buffer layers obtainable.


2003 ◽  
Vol 798 ◽  
Author(s):  
Jun Suda ◽  
Hiroyasu Yamashita ◽  
Robert Armitage ◽  
Tsunenobu Kimoto ◽  
Hiroyuki Matsunami

ABSTRACTZirconium diboride (ZrB2) is a promising lattice-matched substrate for GaN-based materials. A key issue to realize high-quality heteroepitaxial growth is preparation of the substrate surface. The ZrB2 surface was studied by x-ray photoemission spectroscopy (XPS) and reflection high-energy electron diffraction (RHEED). XPS results indicated the presence of both ZrO2 and ZrB2 on the as-received substrate surface. Thermal cleaning at 1000°C in ultra-high vacuum, Ar+ ion sputtering, and wet chemical treatments were examined as surface preparation methods. After treatment with HF acid, the O peak intensity was much reduced. The combination of HF treatment and thermal cleaning resulted in sharp and intense RHEED from the ZrB2 surface. GaN grown on the surface by molecular-beam epitaxy exhibited intense photoluminescence, suggesting that this treatment is effective to obtain high-quality GaN on ZrB2 substrates.


1995 ◽  
Vol 386 ◽  
Author(s):  
W. Hansch ◽  
I. Eisele ◽  
H. Kibbel ◽  
U. KÖnig

ABSTRACTDifferent substrate cleaning procedures were used before fabrication of pin diodes by silicon molecular beam epitaxy (MBE). We investigated the quality of these diodes in order to demonstrate the superior quality of a low energy plasma cleaning in an ultra-high vacuum ( UHV). This plasma cleaning by hydrogen makes a wet-chemical cleaning or a high-temperature desorption step unnecessary. Moreover, the plasma-cleaned substrates are so strongly hydrogen passivated, that they can be transported through air and processed in another MBE chamber without any additional cleaning steps.


Sign in / Sign up

Export Citation Format

Share Document