scholarly journals X-ray Parameter Changes in Core-support Carbon Material for VHTR induced by Very Long Hour Heat-treatment

TANSO ◽  
1983 ◽  
Vol 1983 (112) ◽  
pp. 2-5
Author(s):  
Tamotsu Saito ◽  
Hideto Matsuo
Keyword(s):  
Heat Treatment ◽  
Carbon Material ◽  
X Ray ◽  
Ray Parameter

The Precipitation of Si in AlCuSi Thin Films

1973 ◽  
Vol 31 ◽  
pp. 34-35 ◽  
Author(s):  
R. M. Anderson
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Heat Treatment ◽  
Solid Solution ◽  
Integrated Circuit ◽  
Copper Film ◽  
Solution Concentration ◽  
X Ray ◽  
Silicon Thin Films ◽  
Before And After

Aluminum-copper-silicon thin films have been considered as an interconnection metallurgy for integrated circuit applications. Various schemes have been proposed to incorporate small percent-ages of silicon into films that typically contain two to five percent copper. We undertook a study of the total effect of silicon on the aluminum copper film as revealed by transmission electron microscopy, scanning electron microscopy, x-ray diffraction and ion microprobe techniques as a function of the various deposition methods.X-ray investigations noted a change in solid solution concentration as a function of Si content before and after heat-treatment. The amount of solid solution in the Al increased with heat-treatment for films with ≥2% silicon and decreased for films <2% silicon.

scholarly journals X-ray Determination of Compressive Residual Stresses in Spring Steel Generated by High-Speed Water Quenching

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1154
Author(s):  
Diego E. Lozano ◽  
George E. Totten ◽  
Yaneth Bedolla-Gil ◽  
Martha Guerrero-Mata ◽  
Marcel Carpio ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Residual Stresses ◽  
High Speed ◽  
Spring Steel ◽  
X Ray Diffraction ◽  
Laboratory Equipment ◽  
X Ray ◽  
Water Chamber ◽  
Hardened Case ◽  
Compressive Residual Stresses

Automotive components manufacturers use the 5160 steel in leaf and coil springs. The industrial heat treatment process consists in austenitizing followed by the oil quenching and tempering process. Typically, compressive residual stresses are induced by shot peening on the surface of automotive springs to bestow compressive residual stresses that improve the fatigue resistance and increase the service life of the parts after heat treatment. In this work, a high-speed quenching was used to achieve compressive residual stresses on the surface of AISI/SAE 5160 steel samples by producing high thermal gradients and interrupting the cooling in order to generate a case-core microstructure. A special laboratory equipment was designed and built, which uses water as the quenching media in a high-speed water chamber. The severity of the cooling was characterized with embedded thermocouples to obtain the cooling curves at different depths from the surface. Samples were cooled for various times to produce different hardened case depths. The microstructure of specimens was observed with a scanning electron microscope (SEM). X-ray diffraction (XRD) was used to estimate the magnitude of residual stresses on the surface of the specimens. Compressive residual stresses at the surface and sub-surface of about −700 MPa were obtained.

Phase selection in precursor-derived yttrium aluminum garnet and related Al2O3–Y2O3 compositions

2005 ◽  
Vol 20 (4) ◽  
pp. 1017-1025 ◽  
Author(s):  
Ashutosh S. Gandhi ◽  
Carlos G. Levi
Keyword(s):  
Heat Treatment ◽  
Yttrium Aluminum Garnet ◽  
Lattice Parameter ◽  
Defect Structures ◽  
X Ray Diffraction ◽  
Phase Selection ◽  
X Ray ◽  
Yttrium Aluminum ◽  
Rich Side ◽  
Nitrate Solutions

Al2O3–Y2O3 powders were synthesized in the range of 25–55% Y2O3 by reverse coprecipitation of nitrate solutions. All starting powders were amorphous and formed primary yttrium aluminum garnet (YAG) upon crystallization. X-ray diffraction detected only garnet in compositions of 30–40% Y2O3 after heat treatment at 1250 °C. Compositions of 45–55% Y2O3 established a metastable YAG + Y4Al2O9 microstructure. The YAG phase field was metastably extended away from its stoichiometry, as indicated by a systematic increase in lattice parameter with Y2O3 content. Although some Al2O3 enrichment was achieved, YAG appears to tolerate greater off-stoichiometry on the Y2O3-rich side. Possible defect structures accommodating the solubility extension were examined. Phase selection results indicate that compositional inhomogeneity is not the only reason behind the appearance of hexagonal YAlO3, which is frequently reported during YAG synthesis.

In Situ X-Ray Diffraction Studies of Crystallization Growth Behavior in ZnO-Bi2O3-B2O3 Glass as a Route to Functional Optical Devices

MRS Advances ◽  
2018 ◽  
Vol 3 (11) ◽  
pp. 563-567 ◽  
Author(s):  
Quentin Altemose ◽  
Katrina Raichle ◽  
Brittani Schnable ◽  
Casey Schwarz ◽  
Myungkoo Kang ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Glass Ceramics ◽  
Treatment Temperature ◽  
Crystal Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
In Situ Xrd ◽  
Dsc Measurements ◽  
Transmission Window

ABSTRACTTransparent optical ZnO–Bi2O3–B2O3 (ZBB) glass-ceramics were created by the melt quenching technique. In this work, a melt of the glass containing stoichiometric ratios of Zn/Bi/B and As was studied. Differential scanning calorimeter (DSC) measurements was used to measure the thermal behavior. VIS/NIR transmission measurements were used to determine the transmission window. X-ray diffraction (XRD) was used to determine crystal phase. In this study, we explore new techniques and report a detailed study of in-situ XRD of the ZBB composition in order to correlate nucleation temperature, heat treatment temperature, and heat treatment duration with induced crystal phase.

TEM and X-Ray Examinations of Intermetallic Phases and Carbides Precipitation in an Fe-Ni Superalloy during Prolonged Ageing

2013 ◽  
Vol 212 ◽  
pp. 15-20
Author(s):  
Kazimierz J. Ducki ◽  
Jacek Mendala ◽  
Lilianna Wojtynek
Keyword(s):  
Heat Treatment ◽  
Solution Heat Treatment ◽  
Intermetallic Phase ◽  
Intermetallic Phases ◽  
Precipitation Process ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
Solid Samples ◽  
Structural Investigations ◽  
X Ray

The influence of prolonged ageing on the precipitation process of the secondary phases in an Fe-Ni superalloy of A-286 type has been studied. The samples were subjected to a solution heat treatment at 980°C for 2 h and water quenched, and then aged at temperatures of 715, 750 and 780°C at holding times from 0.5 to 500 h. Structural investigations were conducted using TEM and X-ray diffraction methods. The X-ray phase analyses performed on the isolates were obtained by anodic dissolution of the solid samples. After solution heat treatment the alloy has the structure of twinned austenite with a small amount of undissolved precipitates, such as carbide TiC, carbonitride TiC0.3N0.7, nitride TiN0.3, carbosulfide Ti4C2S2, Laves phase Ni2Si, and boride MoB. The application of ageing causes precipitation processes of γ-Ni3(Al,Ti), G (Ni16Ti6Si7), η (Ni3Ti), β (NiTi) and σ (Cr0.46Mo0.40Si0.14) intermetallic phases, as well as the carbide M23C6. It was found that the main phase precipitating during alloy ageing was the γ intermetallic phase.

Hardening of Selective Laser Melted M2 Steel

2021 ◽  
Author(s):  
Mei Yang ◽  
Yishu Zhang ◽  
Haoxing You ◽  
Richard Smith ◽  
Richard D. Sisson
Keyword(s):  
Heat Treatment ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
High Hardness ◽  
Steel Part ◽  
X Ray Diffraction ◽  
X Ray ◽  
Heat Treated ◽  
Near Net Shape

Abstract Selective laser melting (SLM) is an additive manufacturing technique that can be used to make the near-net-shape metal parts. M2 is a high-speed steel widely used in cutting tools, which is due to its high hardness of this steel. Conventionally, the hardening heat treatment process, including quenching and tempering, is conducted to achieve the high hardness for M2 wrought parts. It was debated if the hardening is needed for additively manufactured M2 parts. In the present work, the M2 steel part is fabricated by SLM. It is found that the hardness of as-fabricated M2 SLM parts is much lower than the hardened M2 wrought parts. The characterization was conducted including X-ray diffraction (XRD), optical microscopy, Scanning Electron Microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) to investigate the microstructure evolution of as-fabricated, quenched, and tempered M2 SLM part. The M2 wrought part was heat-treated simultaneously with the SLM part for comparison. It was found the hardness of M2 SLM part after heat treatment is increased and comparable to the wrought part. Both quenched and tempered M2 SLM and wrought parts have the same microstructure, while the size of the carbides in the wrought part is larger than that in the SLM part.

scholarly journals Synchrotron Nano-Diffraction Study of Thermally Treated Asbestos Tremolite from Val d’Ala, Turin (Italy)

Minerals ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 311 ◽  
Author(s):  
Carlotta Giacobbe ◽  
Jonathan Wright ◽  
Dario Di Giuseppe ◽  
Alessandro Zoboli ◽  
Mauro Zapparoli ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Heat Treatment ◽  
Risk Management ◽  
Structure Analysis ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adverse Health Effects ◽  
Nano Crystalline ◽  
Original Fibre

Nowadays, due to the adverse health effects associated with exposure to asbestos, its removal and thermal inertization has become one of the most promising ways for reducing waste risk management. Despite all the advances in structure analysis of fibers and characterization, some problems still remain that are very hard to solve. One challenge is the structure analysis of natural micro- and nano-crystalline samples, which do not form crystals large enough for single-crystal X-ray diffraction (SC-XRD), and their analysis is often hampered by reflection overlap and the coexistence of multiple fibres linked together. In this paper, we have used nano-focused synchrotron X-rays to refine the crystal structure of a micrometric tremolite fibres from Val d’Ala, Turin (Italy) after various heat treatment. The structure of the original fibre and after heating to 800 °C show minor differences, while the fibre that was heated at 1000 °C is recrystallized into pyroxene phases and cristobalite.

TIN ADDITION TO THE (Bi, Pb) 2223 SYSTEM

1994 ◽  
Vol 08 (19) ◽  
pp. 1175-1183 ◽  
Author(s):  
G. RAVI CHANDRA ◽  
B. GOPALA KRISHNA ◽  
S. V. SURYANARAYANA ◽  
T. S. N. MURTHY
Keyword(s):  
Heat Treatment ◽  
Magnetic Susceptibility ◽  
Electrical Resistance ◽  
Volume Fraction ◽  
Ac Magnetic Susceptibility ◽  
Superconducting Properties ◽  
X Ray Diffraction ◽  
Metallic Behavior ◽  
X Ray

The effect of the addition of Sn on the superconducting properties of the Bi 1.7 Pb 0.3 Sr 2 Ca 2 Cu 3 O y system as functions of Sn concentration and heat treatment has been studied by dc electrical resistance, ac magnetic susceptibility, and X-ray diffraction. Tin addition suppresses the volume fraction of the high T c phase. Samples with Sn > 0.1 show metallic behavior up to LNT. The formation of the Ca 2 PbO 4 phase is promoted by Sn. This depletes the amount of Pb and Ca necessary for the formation of the 2223 phase, thus reducing the volume fraction of the 2223 phase. It is possible that at least a small fraction of tin substitutes some of the cationic sites of the starting composition. The results of the different measurements are presented.

Analysis of CoCrMo Surface Oxide Removal by Alumina Blasting before Porcelain Firing in Dental Restorations

2012 ◽  
Vol 730-732 ◽  
pp. 9-14 ◽  
Author(s):  
Bruno Henriques ◽  
Filipe Silva ◽  
Delfim Soares
Keyword(s):  
Heat Treatment ◽  
Surface Roughness ◽  
Chemical Composition ◽  
High Alumina ◽  
X Ray ◽  
Dental Restorations ◽  
Ceramic Bond ◽  
Xrf Scanning ◽  
Oxide Removal

The purpose of this work was to perform a chemical and mechanical characterization of a preoxidized CoCrMo alumina blasted surface. This is a commonly performed surface treatment used in metal-porcelain systems for dental restorations to remove oxides formed during preoxidation heat treatment from the metal’s surface. CoCrMo dental alloy’s specimens produced by lost wax process were examined in terms of chemical composition using X-Ray fluorescence spectroscopy (XRF), Scanning Electron Microscopy (SEM) and Energy Dispersive X-Ray Spectroscopy (EDS); in terms of mechanical characteristics through the means of a microhardness test and in terms of surface roughness using a profilometer. It was investigated the chemical composition of various surface conditions: non-preoxidized, preoxidized, ground oxidized surface and sandblasted oxidized surface. After alumina blasting, the oxides level on metal’s surface remained high. Alumina blasting treatment (Ø110 µm) produced an 84% increase of CoCrMo surface hardening and an increase in surface roughness (Ra=0.58 µm). It was found alumina contaminants on the metal’s surface. Therefore, it was concluded that alumina blasting do not entirely removes the oxide layer formed during preoxidation heat treatment. It produced a chemical and mechanical surface modification that can influence the metal-ceramic bond strength.

Sign in / Sign up

Export Citation Format

Share Document