scholarly journals Wood use and kayak construction: Material selection from the perspective of carpentry

2013 ◽  
Vol 36 (1) ◽  
pp. 49-62 ◽  
Author(s):  
Matthew Walls
Keyword(s):  
Material Selection ◽  
Construction Material ◽  
Experimental Archaeology ◽  
The Arctic ◽  
Archaeological Sites

Abstract Although the natural availability and quality of wood is variable across the Arctic, there is great continuity in how it was traditionally used. This article considers the value of wood to Arctic peoples and the criteria that would distinguish the utility of different pieces. The topic is explored in the case of kayak construction, one of the most complex carpentry tasks that can be inferred from many archaeological sites. Numerous types of kayaks were built in several periods by a variety of peoples using very different toolkits. Using both ethnographic and archaeological examples, it is shown that this technology everywhere shared several key stages of construction. Within these stages, specific carpentry tasks defined the criteria that all kayak builders used to select wood. By exploring the value of wood to Arctic peoples for carpentry, this article demonstrates the potential for understanding wood use through experimental archaeology.

Investigational Studies on Quantity of Salinity in Netravati River Estuary Sand-Coastal Karnataka

2018 ◽  
Vol 6 (6) ◽  
pp. 46
Author(s):  
Raveesha P ◽  
K. E. Prakash ◽  
B. T. Suresh Babu
Keyword(s):  
Brackish Water ◽  
Sea Water ◽  
Salt Water ◽  
Construction Material ◽  
Salt Content ◽  
River Estuary ◽  
Sand Sample ◽  
River Sand ◽  
Natural Aggregates

The salt water mixes with fresh water and forms brackish water. The brackish water contains some quantity of salt, but not equal to sea water. Salinity determines the geographic distribution of the number of marshes found in estuary. Hence salinity is a very important environmental factor in estuary system. Sand is one major natural aggregate, required in construction industry mainly for the manufacture of concrete. The availability of good river sand is reduced due to salinity. The quality of sand available from estuarine regions is adversely affected due to this reason. It is the responsibility of engineers to check the quality of sand and its strength parameters before using it for any construction purpose. Presence of salt content in natural aggregates or manufactured aggregates is the cause for corrosion in steel. In this study the amount of salinity present in estuary sand was determined. Three different methods were used to determine the salinity in different seasonal variations. The sand sample collected nearer to the sea was found to be high in salinity in all methods.  It can be concluded that care should be taken before we use estuary sand as a construction material due to the presence of salinity.

PENGARUH STRATEGI PEMBELAJARAN DAN MINAT BELAJAR TERHADAP HASIL BELAJAR KONSTRUKSI POLA PADA SISWA SMK NEGERI 8 MEDAN

2012 ◽  
Vol 18 (3) ◽  
pp. 121
Author(s):  
Surniati Chalid
Keyword(s):  
Secondary Education ◽  
Learning Outcomes ◽  
Learning Strategies ◽  
Construction Material ◽  
Quality Of Education ◽  
Vocational Schools ◽  
Educational Facilities ◽  
Quality Of Learning

Vocational schools (SMK) is a secondary education that preparesstudents primarily for working on a particular field. Diverse efforts made by SMKgraduates increased 8 Medan include improving the quality of education byreforming both the substance of the material and the provision of facilities andinfrastructure. However, the results have not been up, cermatan can be seen fromthe low competence of graduates, making it less able to play a role in meeting thedemands of the workplace. Assumed to be an indication of the quality of learning isstill performed during less effective, less efficient and unable to increase studentinterest. In order to achieve maximum learning outcomes is through theimprovement of learning strategies to utilize the educational facilities in accordancewith existing conditions, ie, by examining one of the subjects namely Constructiondressmaking pattern. Construction material pattern done with learning strategyapproach manipulated into two comparing results STAD cooperative learningstrategies and learning strategies expository and compare the results with thelearning characteristics of students with high and low interest in learning onlearning outcomes Pattern Construction.

Loom weights in Archaic South Italy and Sicily: Fice case studies

2015 ◽  
Vol 8 ◽  
pp. 123-155
Author(s):  
Hedvig Landenius Enegren
Keyword(s):  
Case Studies ◽  
Indigenous Peoples ◽  
Environmental Conditions ◽  
Experimental Archaeology ◽  
Archaeological Sites ◽  
Site Specificity ◽  
Archaeological Record ◽  
South Italy ◽  
Local Traditions ◽  
Tool Technology

Textiles are perishables in the archaeological record unless specific environmental conditions are met. Fortunately, the textile tools used in their manufacture can provide a wealth of information and via experimental archaeology make visible to an extent what has been lost. The article presents and discusses the results obtained in a research project focused on textile tool technologies and identities in the context of settler and indigenous peoples, at select archaeological sites in South Italy and Sicily in the Archaic and Early Classical periods, with an emphasis on loom weights. Despite a common functional tool technology, the examined loom weights reveal an intriguing inter-site specificity, which, it is argued, is the result of hybrid expressions embedded in local traditions. Experimental archaeology testing is applied in the interpretation of the functional qualities of this common artefact.

scholarly journals The Impact of Post-Manufacture Treatments on the Surface Characteristics Important for Finishing of OSB and Particleboard

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 975
Author(s):  
Antonio Copak ◽  
Vlatka Jirouš-Rajković ◽  
Nikola Španić ◽  
Josip Miklečić
Keyword(s):  
Water Vapour ◽  
Oriented Strand Board ◽  
Construction Material ◽  
Surface Characteristics ◽  
Surface Treatments ◽  
Factors Affecting ◽  
Treatment Conditions ◽  
Water Vapour Absorption ◽  
The Impact

Oriented strand board (OSB) is a commonly used structural wood-based panel for walls and roof siding, but recently the industry has become interested in OSB as a substrate for indoor and outdoor furniture. Particleboard is mainly used in furniture productions and has become popular as a construction material due to its numerous usage possibilities and inexpensive cost. Moisture is one of the most important factors affecting wood-based panel performance and the post-treatment conditions affected their affinity to water. When OSB and particleboard are used as substrates for coatings, their surface characteristics play an important role in determining the quality of the final product. Furthermore, roughness can significantly affect the interfacial phenomena such as adsorption, wetting, and adhesion which may have an impact on the coating performance. In this research particleboard and OSB panels were sanded, re-pressed and IR heated and the influence of surface treatments on hardness, roughness, wetting, water, and water vapour absorption was studied. Results showed that sanding improved the wetting of particleboard and OSB with water. Moreover, studied surface treatments increased water absorption and water penetration depth of OSB panels, and re-pressing had a positive effect on reducing the water vapour absorption of particleboard and OSB panels.

scholarly journals Climate Change in the Arctic—The Need for a Broader Gender Perspective in Data Collection

2021 ◽  
Vol 18 (2) ◽  
pp. 628
Author(s):  
Arja Rautio ◽  
Natalia Kukarenko ◽  
Lena Maria Nilsson ◽  
Birgitta Evengard
Keyword(s):  
Climate Change ◽  
Data Collection ◽  
Human Health ◽  
Economic Benefits ◽  
Theoretical Background ◽  
The Arctic ◽  
Gender Analysis ◽  
Roles And Responsibilities ◽  
Disaggregated Data

Climate change in the Arctic affects both environmental, animal, and human health, as well as human wellbeing and societal development. Women and men, and girls and boys are affected differently. Sex-disaggregated data collection is increasingly carried out as a routine in human health research and in healthcare analysis. This study involved a literature review and used a case study design to analyze gender differences in the roles and responsibilities of men and women residing in the Arctic. The theoretical background for gender-analysis is here described together with examples from the Russian Arctic and a literature search. We conclude that a broader gender-analysis of sex-disaggregated data followed by actions is a question of human rights and also of economic benefits for societies at large and of the quality of services as in the health care.

Flake Dispersal Experiments: Noncultural Transformation of the Archaeological Record

1983 ◽  
Vol 48 (3) ◽  
pp. 553-572 ◽  
Author(s):  
Peter M. Bowers ◽  
Robson Bonnichsen ◽  
David M. Hoch
Keyword(s):  
Human Activity ◽  
Time Lapse ◽  
Primary Factor ◽  
Frost Heave ◽  
The Arctic ◽  
Archaeological Sites ◽  
Archaeological Record ◽  
Alaska Range ◽  
Natural Processes ◽  
Present Test

Time lapse studies of frost action effects on arctic and subarctic surficial archaeological sites have been conducted from 1973 to the present. Test plots of experimentally produced flakes were constructed in 1973 in the Tangle Lakes Region of the Central Alaska Range and subsequently remapped and photographed in 1974, 1976, and 1980. Similar test plots were laid out in the arctic foothills province of the Brooks Range. Observations made during the study period include: (1) flake displacements of as much as 20 cm/yr; (2) average minimum movement is 4 cm/yr; and (3) upslope movements were observed, suggesting that slope is not the primary factor in flake displacements. Frost heave, needle ice and, possibly, wind appear to be the dominant forces responsible for dispersals. It is argued that these and other natural processes can restructure the archaeological record into patterns that easily can be mistaken for those produced by human activity.

scholarly journals Looking beyond appearances: a multi-analytical approach on the prehistoric clay weights

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Bogdan Manea ◽  
Mircea Lechintan ◽  
Gabriel Popescu ◽  
Theodor Ignat ◽  
Vasile Opriş ◽  
...  
Keyword(s):  
Material Culture ◽  
Analytical Approach ◽  
Experimental Archaeology ◽  
Relevant Information ◽  
Archaeological Sites ◽  
Cultural Complex ◽  
Multiple Dimensions ◽  
Size Modification ◽  
Multiple Meanings ◽  
Transformation Processes

Abstract In this paper we analyzed a batch of 64 clay weights from three archaeological sites located in Romania (Gumelniţa, Măgura-Jilava, and Sultana) that belong to Kodjadermen-Gumelniţa-Karanovo VI cultural complex (4600–3900 cal. BC). Our approach includes an interdisciplinary investigation based on technological analysis, experimental archaeology, and X-ray CT scans coupled with statistical analysis. This investigation has a high potential to reveal relevant information regarding the technological background (e.g., inclusion, voids, temper, etc.), manufacturing stages (e.g., modeling, shaping, kneading, etc.), or transformation processes (e.g., drying and firing vs. weight and size modification) in order to identify, explain and understand the chaîne operatoire for this type of artefacts. Moreover, correlation of the results with the experimental archaeology could offer an integrative interpretation about the material culture of past humans and its multiple meanings, but also critical information about the multiple dimensions of manufacture for these objects (e.g., time, effort, physical–chemical processes, etc.). The multi-analytical approach proposed here also includes a comparative study of technological aspects of these clay weights across the three archaeological sites investigated, as well as the experimental replicas.

scholarly journals BUDGET UAV SYSTEMS FOR THE PROSPECTION OF SMALL- AND MEDIUM-SCALE ARCHAEOLOGICAL SITES

2016 ◽  
Vol XLI-B1 ◽  
pp. 971-977 ◽  
Author(s):  
W. Ostrowski ◽  
K. Hanus
Keyword(s):  
Low Cost ◽  
Planning System ◽  
Archaeological Sites ◽  
Quality Of Data ◽  
Computing Power ◽  
Medium Scale ◽  
The Cost ◽  
User Friendly ◽  
Operational Range

One of the popular uses of UAVs in photogrammetry is providing an archaeological documentation. A wide offer of low-cost (consumer) grade UAVs, as well as the popularity of user-friendly photogrammetric software allowing obtaining satisfying results, contribute to facilitating the process of preparing documentation for small archaeological sites. However, using solutions of this kind is much more problematic for larger areas. The limited possibilities of autonomous flight makes it significantly harder to obtain data for areas too large to be covered during a single mission. Moreover, sometimes the platforms used are not equipped with telemetry systems, which makes navigating and guaranteeing a similar quality of data during separate flights difficult. The simplest solution is using a better UAV, however the cost of devices of such type often exceeds the financial capabilities of archaeological expeditions. <br><br> The aim of this article is to present methodology allowing obtaining data for medium scale areas using only a basic UAV. The proposed methodology assumes using a simple multirotor, not equipped with any flight planning system or telemetry. Navigating of the platform is based solely on live-view images sent from the camera attached to the UAV. The presented survey was carried out using a simple GoPro camera which, from the perspective of photogrammetric use, was not the optimal configuration due to the fish eye geometry of the camera. Another limitation is the actual operational range of UAVs which in the case of cheaper systems, rarely exceeds 1 kilometre and is in fact often much smaller. Therefore the surveyed area must be divided into sub-blocks which correspond to the range of the drone. It is inconvenient since the blocks must overlap, so that they will later be merged during their processing. This increases the length of required flights as well as the computing power necessary to process a greater number of images. <br><br> These issues make prospection highly inconvenient, but not impossible. Our paper presents our experiences through two case studies: surveys conducted in Nepal under the aegis of UNESCO, and works carried out as a part of a Polish archaeological expedition in Cyprus, which both prove that the proposed methodology allows obtaining satisfying results. The article is an important voice in the ongoing debate between commercial and academic archaeologists who discuss the balance between the required standards of conducting archaeological works and economic capabilities of archaeological missions.

scholarly journals A Prototype Expert System for the Selection of Road Construction Materials

2007 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
S. Hassim ◽  
K.T. Teh ◽  
R. Muniandy ◽  
H. Omar ◽  
A. Hassan
Keyword(s):  
Expert System ◽  
Knowledge Base ◽  
Material Selection ◽  
Construction Material ◽  
Construction Materials ◽  
Road Construction ◽  
Statistical Testing ◽  
Factors Affecting ◽  
Microsoft Access ◽  
Programming Tool

A prototype for an expert system in road construction material selection system, which is based on the outcomes of Friedman and multiple comparisons statistical methods was developed. The outcomes were acquired through questionnaires from selected pavement experts. The factors affecting pavement materials under each particular site condition were incorporated into the specific rules of the system. The system knowledge-base was extracted from the statistical testing outcomes and then rearranged and compiled prior to the development of the system. Visual Basic 6.0 was adopted as the programming tool for development of the system, while the knowledge-base of the separate system was kept in Microsoft Access 2000. The prototype expert system can be used to emulate part of the professional reasoning capabilities based on the knowledge of a pavement expert or a specialist to solve problems on materials selection. The system can help road designers to improve their professional ability to evaluate all available materials even before carrying out any laboratory tests.

scholarly journals Nautical electronic maps of S-411 standard and their suitability in navigation for assessment of ice cover condition of the Arctic Ocean

2016 ◽  
Vol 48 (1) ◽  
pp. 17-28 ◽  
Author(s):  
Tadeusz Pastusiak
Keyword(s):  
Arctic Ocean ◽  
Ice Cover ◽  
Research Process ◽  
Data Sources ◽  
The Arctic ◽  
Quality Of Data ◽  
Vector Maps ◽  
The Arctic Ocean ◽  
Wide Availability

Abstract The research on the ice cover of waterways, rivers, lakes, seas and oceans by satellite remote sensing methods began at the end of the twentieth century. There was a lot of data sources in diverse file formats. It has not yet carried out a comparative assessment of their usefulness. A synthetic indicator of the quality of data sources binding maps resolution, file publication, time delay and the functionality for the user was developed in the research process. It reflects well a usefulness of maps and allows to compare them. Qualitative differences of map content have relatively little impact on the overall assessment of the data sources. Resolution of map is generally acceptable. Actuality has the greatest impact on the map content quality for the current vessel’s voyage planning in ice. The highest quality of all studied sources have the regional maps in GIF format issued by the NWS / NOAA, general maps of the Arctic Ocean in NetCDF format issued by the OSI SAF and the general maps of the Arctic Ocean in GRIB-2 format issued by the NCEP / NOAA. Among them are maps containing information on the quality of presented parameter. The leader among the map containing all three of the basic characteristics of ice cover (ice concentration, ice thickness and ice floe size) are vector maps in GML format. They are the new standard of electronic vector maps for the navigation of ships in ice. Publishing of ice cover maps in the standard electronic map format S-411 for navigation of vessels in ice adopted by the International Hydrographic Organization is advisable in case is planned to launch commercial navigation on the lagoons, rivers and canals. The wide availability of and exchange of information on the state of ice cover on rivers, lakes, estuaries and bays, which are used exclusively for water sports, ice sports and ice fishing is possible using handheld mobile phones, smartphones and tablets.

Sign in / Sign up

Export Citation Format

Share Document