scholarly journals Enhancing the stability of local vegetable oils (esters) for high geothermal drilling applications

2015 ◽  
Vol 6 (8) ◽  
pp. 90-97 ◽  
Author(s):  
Amorin Richard ◽  
Dosunmu Adewale ◽  
K Amankwah Richard
2018 ◽  
Vol 69 (9) ◽  
pp. 2366-2371
Author(s):  
Andrei Cucos ◽  
Petru Budrugeac ◽  
Iosif Lingvay ◽  
Adriana Mariana Bors ◽  
Andreea Voina

Thermal TG/DTG/DTA analysis coupled with FTIR spectroscopy was applied to some sorts of mineral and vegetable oils used in electrical equipment. On heating in inert atmosphere, it was observed that the mineral oils vaporize, while the vegetable oils undergo hydrolysis, yielding fatty acids as main volatiles, as indicated by FTIR. In synthetic air, the FTIR spectra of gaseous products confirm the presence of similar oxidation products, both for mineral and vegetable oils. The TG results indicated that the vegetable-based oils exhibit a substantially higher thermal stability than the mineral oils. The presence or absence of anti-oxidant inhibitors in these oils greatly influences the onset of the oxidation process in air environment factor, as results from the DTA results.


Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1637
Author(s):  
Yunjiao Zhao ◽  
Rui Liu ◽  
Cuiping Qi ◽  
Wen Li ◽  
Mohamed Rifky ◽  
...  

The active components in garlic essential oil are easily degradable, which limits its application in the food industry. Vegetable oils (VOs) were used to improve the stability of garlic essential oil (GEO) emulsion. The volatile compounds of GEO and its mixtures with vegetable oils (VOs), including corn oil (CO), soybean oil (SO), and olive oil (OO) indicated that GEO-VO mixtures had a higher percentage of Diallyl disulfide and Diallyl trisulfide than pure GEO. Adding an appropriate amount of VOs promoted the GEO emulsion (whey protein concentrate and inulin as the wall materials) stability in order of CO > SO > OO. Evaluation of the encapsulation efficiency, controlled release, and antimicrobial activity of GEO-VO microcapsules showed that the GEO was successfully entrapped and slowly released with active antibacterial activities on both E. coli and S. aureus. Collectively, these results implied that VOs, especially for 20% CO, improved the stability of GEO emulsions and the encapsulation efficiency of GEO microcapsules. The mechanism might be related to (1) the regulating effect of density difference between oil and water phases on prevention to gravitational separation, (2) the promotion to the compatibility of GEO and VOs to inhibit the phase separation caused by Ostwald ripening.


Author(s):  
В.И. МАРТОВЩУК ◽  
С.А. КАЛМАНОВИЧ ◽  
А.А. ЛОБАНОВ ◽  
Е.В. МАРТОВЩУК

Исследовано влияние механохимической активации на гидратируемость фосфолипидов растительных масел. Для эксперимента использовали механохимический активатор, обеспечивающий высокие локальные давления, сдвиговые деформации и кавитационный эффект, при следующих параметрах работы: давление на контактирующих поверхностях 70 МПа, частота 180 Гц, скорость сдвига 10200 с–1, размер капли эмульсии 1–2 мкм. Обработку образцов подсолнечного масла осуществляли в течение от 0 до 80 с при температурах 50, 60 и 70°С. Активность фосфолипидов оценивали по величине их адсорбции на границе с полярной поверхностью (водой) в оптимальном температурном режиме при обработке в механохимическом активаторе и без нее. Установлено, что механохимическая активация способствует снижению энергии активации с 6,4 до 4,7 кДж/моль за счет химических и структурных изменений фосфолипидов. В жирнокислотном составе фосфолипидов на 10–12% увеличилось содержание олеиновой кислоты при соответствующем уменьшении линолевой; в фосфатидилэтаноламинах и фосфатидилсеринах отмечено увеличение до 3% содержания пальмитиновой кислоты и незначительно – стеариновой кислоты. Эти изменения жирнокислотного состава и физических свойств фосфолипидов способствуют повышению их гидратируемости и уменьшению доли полиненасыщенных жирных кислот, что должно обеспечить стабильность обработанных в механохимическом активаторе масел к окислению при хранении. The effect of mechanochemical activation on the hydration of phospholipids of vegetable oils has been studied. A mechanochemical activator providing high local pressures, shear deformations and cavitation effect was used for the experiment with the following operating parameters: pressure on the contact surfaces of 70 MPa, frequency of 180 Hz, shear rate of 10200 s–1, the size of the emulsion drop of 1–2 microns. Processing of sunflower oil samples was carried out during 0 to 80 s at temperatures of 50, 60 and 70°C. The activity of phospholipids was estimated by the amount of their adsorption at the border with the polar surface (water) in the optimal temperature mode when processed in a mechanochemical activator and without it. It was found that mechanochemical activation contributes to a decrease in the activation energy from 6,4 to 4,7 kJ/mol due to chemical and structural changes in phospholipids. In the fatty acid composition of phospholipids, the content of oleic acid increased by 10–12% with a corresponding decrease in linoleic acid; in phosphatidylethanolamines and phosphatidylserines, the increase in the content of palmitic acid was noted to 3%, and stearic acid – slightly. These changes in the fatty acid composition and physical properties of phospholipids contribute to increasing their hydration and reducing the proportion of polyunsaturated fatty acids, which should ensure the stability of the oils processed in the mechanochemical activator to oxidation during storage.


1940 ◽  
Vol 17 (7) ◽  
pp. 138-143 ◽  
Author(s):  
W. G. Bickford ◽  
Scott Anderson ◽  
K. S. Markley
Keyword(s):  

2019 ◽  
Vol 23 (3) ◽  
pp. 4-8 ◽  
Author(s):  
L.N. Studenikina ◽  
L.V. Popova ◽  
V.I. Korchagin

Investigated spent microcellulose (MC) of the stage of winterization of the production of refined vegetable oils (spent adsorbent). The stability of the MC composition was evaluated under various storage conditions (with and without access to oxygen, at temperatures of 20 and 4°C). A technological scheme for the disposal of MC as a plasticizer additive for polymer compositions is proposed. It was found that the melt viscosity index of the composition “polyethylene: microcellulose” (70:30% by weight) decreases by 14% with the introduction of an MC-based plasticizer and stretch polyethylene (50: 50% by weight) in an amount of 20% by weight.


Sign in / Sign up

Export Citation Format

Share Document