scholarly journals The Novel Nanomaterials Based Biosensors and Their Applications

2020 ◽  
Author(s):  
Kübra Gençdağ Şensoy ◽  
Mihrican Muti
Keyword(s):  
Medical Diagnosis ◽  
Polymeric Nanoparticles ◽  
Metal Oxide Nanoparticles ◽  
High Surface ◽  
Volume Ratio ◽  
Selective Detection ◽  
The Novel ◽  
Safety Control ◽  
Mechanical And Electrical Properties ◽  
Detection Of Biomolecules

Since the development of the first biosensor reported, biosensor has received considerable attention due to its high selectivity and sensitivity. Biosensors are highly pursued in order to meet the growing demands and challenges in a large number of analytic applications such as medical diagnosis, food safety control, environmental monitoring, or even military defense. Due to the unique physical, chemical, mechanical and electrical properties, nanomaterials have been widely investigated for their ability and used to fabricate sensors. High surface to volume ratio, good stability, excellent electrocatalytic properties of the nanomaterials plays an important role in the sensitive and selective detection of biomolecules. The synthesis of new nanomaterials with different properties is increasingly common in order to improve these counted properties of nanomaterials. This chapter gives an overview of the importance of the development of novel nanomaterials based biosensors technologies. The use of different funtionalized carbon nanomaterilas, metal oxide nanoparticles, metal nanoparticles, polymeric nanoparticles, quantum dots, graphene sheets and other novel nanomaterials in biosensor technology, and their innovations and advantages are discussed.

Fabrication of a new calix[4]arene-functionalized Mn3O4 nanoparticle-based modified glassy carbon electrode as a fast responding sensor towards Pb2+ and Cd2+ ions

2019 ◽  
Vol 11 (6) ◽  
pp. 813-820 ◽  
Author(s):  
Prashanth Shivappa Adarakatti ◽  
Ashoka Siddaramanna ◽  
Pandurangappa Malingappa
Keyword(s):  
Metal Oxide ◽  
Glassy Carbon Electrode ◽  
Glassy Carbon ◽  
Metal Oxide Nanoparticles ◽  
High Surface ◽  
Volume Ratio ◽  
Oxide Nanoparticles ◽  
Carbon Electrode ◽  
Modified Glassy Carbon Electrode ◽  
Sensing Applications

Macromolecule-functionalized metal oxide nanoparticles based composite provide combined advantages of functional groups and high surface to volume ratio, which make them good materials in sensing applications.

Superficial and electrical characterization of thin films based on Chitosan/polypyrrole/MWCNT

2016 ◽  
Vol 1819 ◽  
Author(s):  
A. Olarte-Paredes ◽  
R. Salgado-Delgado ◽  
A. M. Salgado-Delgado ◽  
E. Rubio-Rosas ◽  
E. García-Hernández ◽  
...  
Keyword(s):  
Electrical Properties ◽  
Surface Characterization ◽  
Electrochemical Impedance ◽  
High Surface ◽  
Electrical Characterization ◽  
Volume Ratio ◽  
Homogeneous Distribution ◽  
Multilayer Carbon Nanotubes ◽  
Mechanical And Electrical Properties ◽  
The Matrix

ABSTRACTIn recent decades conducting polymers have attracted attention due to their promising and versatile applications in different fields. There is a considerable interest in the application of nanotubes multilayer carbon (MWCNT) because of their unique structure, high electrical conductivity, high chemical stability, and high surface-to-volume ratio. These properties make MWCNT extremely attractive for fabricating sensors. Composites based on a matrix of a biopolymer such as the chitosan (CS) with a lot of conductive polymers or (MWCNT), have received increasing attention due to their attractive structural, mechanical and electrical properties that could have applications in different fields such as tissue engineering, biomedicine, and manufacture of sensors and biosensors. Have been reported conducting polymer composites with an extensive range of interesting mechanical and electrical properties, which is reported in this paper to obtain films by ultrasonic bath mixing of Chitosan 3% w/v using polypyrrole (PPy) and multilayer carbon nanotubes. Surface characterization was performed using scanning electron microscopy (SEM). The electrical properties were analyzed using electrochemical impedance spectroscopy (EIS) in a frequency range 0.01 - 10E+5 Hz to 10 mV AC. The results show that the films of CS/PPy/MWCNT have a homogeneous distribution where the chitosan envelops the loads, while for EIS retention load was observed within the matrix observing these materials in accordance with the equivalent circuit of Warburg showing diffusional process.

Nanomaterials in Electrochemical Biosensor

2014 ◽  
Vol 995 ◽  
pp. 125-143 ◽  
Author(s):  
Md. Abdul Aziz ◽  
Munetaka Oyama
Keyword(s):  
High Surface ◽  
Chemical Properties ◽  
Volume Ratio ◽  
High Sensitivity ◽  
Electrochemical Biosensors ◽  
Surface Immobilization ◽  
Physico Chemical ◽  
Overall Performance ◽  
Detection Of Biomolecules ◽  
Affinity Biosensors

Nanomaterial based electrochemical method gain tremendous interest for the detection of biomolecules due to high sensitivity, selectivity, and low fabrication cost. High surface to volume ratio, excellent electrocatalytic properties of the nanomaterials plays important role for the sensitive and selective detection of biomolecules. For electrochemical biosensors, proper control of chemical, electrochemical and physical properties, as well as their functionalization and surface immobilization significantly influences the overall performance. This chapter gives an overview of the importance of the development of nanomaterials based electrochemical biosensors; particularly direct electrooxidation-or electroreduction-based biosensors, catalysis-based biosensors, and label-based affinity biosensors. In addition, fabrication methods including modification of electrode surface with nanomaterials, tailoring their physico-chemical properties, and functionalization with chemicals or biomolecules are also highlighted.

Novel Applications of Nanotechnology in Controlling HIV and HSV Infections

2020 ◽  
Vol 12 ◽  
Author(s):  
Sai Akilesh M ◽  
Ashish Wadhwani
Keyword(s):  
Drug Delivery ◽  
Viral Infections ◽  
Polymeric Nanoparticles ◽  
Volume Ratio ◽  
Fold Increase ◽  
Multi Drug Resistance ◽  
Health Crisis ◽  
Pharmaceutical Properties ◽  
Simplex Virus ◽  
The Impact

: Infectious diseases have been prevalent since many decades and viral pathogens have caused global health crisis and economic meltdown on a devastating scale. High occurrence of newer viral infections in the recent years, in spite of the progress achieved in the field of pharmaceutical sciences defines the critical need for newer and more effective antiviral therapies and diagnostics. The incidence of multi-drug resistance and adverse effects due to the prolonged use of anti-viral therapy is also a major concern. Nanotechnology offers a cutting edge platform for the development of novel compounds and formulations for biomedical applications. The unique properties of nano-based materials can be attributed to the multi-fold increase in the surface to volume ratio at the nano-scale, tunable surface properties of charge and chemical moieties. Idealistic pharmaceutical properties such as increased bioavailability and retention times, lower toxicity profiles, sustained release formulations, lower dosage forms and most importantly, targeted drug delivery can be achieved through the approach of nanotechnology. The extensively researched nano-based materials are metal and polymeric nanoparticles, dendrimers and micelles, nano-drug delivery vesicles, liposomes and lipid based nanoparticles. In this review article, the impact of nanotechnology on the treatment of Human Immunodeficiency Virus (HIV) and Herpes Simplex Virus (HSV) viral infections during the last decade are outlined.

scholarly journals Electrospun Nanofibers for Sensing and Biosensing Applications—A Review

2021 ◽  
Vol 22 (12) ◽  
pp. 6357
Author(s):  
Kinga Halicka ◽  
Joanna Cabaj
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Toxic Metal ◽  
Volume Ratio ◽  
Electrospun Nanofibers ◽  
Clinical Diagnostics ◽  
Loading Capacity ◽  
Electrospun Nanofiber ◽  
Sensing Platforms ◽  
Different Types

Sensors and biosensors have found applications in many areas, e.g., in medicine and clinical diagnostics, or in environmental monitoring. To expand this field, nanotechnology has been employed in the construction of sensing platforms. Because of their properties, such as high surface area to volume ratio, nanofibers (NFs) have been studied and used to develop sensors with higher loading capacity, better sensitivity, and faster response time. They also allow to miniaturize designed platforms. One of the most commonly used techniques of the fabrication of NFs is electrospinning. Electrospun NFs can be used in different types of sensors and biosensors. This review presents recent studies concerning electrospun nanofiber-based electrochemical and optical sensing platforms for the detection of various medically and environmentally relevant compounds, including glucose, drugs, microorganisms, and toxic metal ions.

scholarly journals Study of the geometry of open channels in a layer-bed-type microfluidic immobilized enzyme reactor

2021 ◽  
Author(s):  
Cynthia Nagy ◽  
Robert Huszank ◽  
Attila Gaspar
Keyword(s):  
Immobilized Enzyme ◽  
High Surface ◽  
Volume Ratio ◽  
Volumetric Flow Rate ◽  
Enzyme Reactor ◽  
Channel Pattern ◽  
Immobilized Enzyme Reactor ◽  
Split Flow ◽  
Parallel Streams ◽  
Enzymatic Microreactors

AbstractThis paper aims at studying open channel geometries in a layer-bed-type immobilized enzyme reactor with computer-aided simulations. The main properties of these reactors are their simple channel pattern, simple immobilization procedure, regenerability, and disposability; all these features make these devices one of the simplest yet efficient enzymatic microreactors. The high surface-to-volume ratio of the reactor was achieved using narrow (25–75 μm wide) channels. The simulation demonstrated that curves support the mixing of solutions in the channel even in strong laminar flow conditions; thus, it is worth including several curves in the channel system. In the three different designs of microreactor proposed, the lengths of the channels were identical, but in two reactors, the liquid flow was split to 8 or 32 parallel streams at the inlet of the reactor. Despite their overall higher volumetric flow rate, the split-flow structures are advantageous due to the increased contact time. Saliva samples were used to test the efficiencies of the digestions in the microreactors. Graphical abstract

scholarly journals A Review on Biosensors and Recent Development of Nanostructured Materials-Enabled Biosensors

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1109
Author(s):  
Varnakavi. Naresh ◽  
Nohyun Lee
Keyword(s):  
High Surface ◽  
Three Dimensional ◽  
Biological Response ◽  
Volume Ratio ◽  
Recent Decade ◽  
Disease Diagnosis ◽  
Electrical Signal ◽  
Detection Sensitivity ◽  
Wide Range ◽  
Color Tunability

A biosensor is an integrated receptor-transducer device, which can convert a biological response into an electrical signal. The design and development of biosensors have taken a center stage for researchers or scientists in the recent decade owing to the wide range of biosensor applications, such as health care and disease diagnosis, environmental monitoring, water and food quality monitoring, and drug delivery. The main challenges involved in the biosensor progress are (i) the efficient capturing of biorecognition signals and the transformation of these signals into electrochemical, electrical, optical, gravimetric, or acoustic signals (transduction process), (ii) enhancing transducer performance i.e., increasing sensitivity, shorter response time, reproducibility, and low detection limits even to detect individual molecules, and (iii) miniaturization of the biosensing devices using micro-and nano-fabrication technologies. Those challenges can be met through the integration of sensing technology with nanomaterials, which range from zero- to three-dimensional, possessing a high surface-to-volume ratio, good conductivities, shock-bearing abilities, and color tunability. Nanomaterials (NMs) employed in the fabrication and nanobiosensors include nanoparticles (NPs) (high stability and high carrier capacity), nanowires (NWs) and nanorods (NRs) (capable of high detection sensitivity), carbon nanotubes (CNTs) (large surface area, high electrical and thermal conductivity), and quantum dots (QDs) (color tunability). Furthermore, these nanomaterials can themselves act as transduction elements. This review summarizes the evolution of biosensors, the types of biosensors based on their receptors, transducers, and modern approaches employed in biosensors using nanomaterials such as NPs (e.g., noble metal NPs and metal oxide NPs), NWs, NRs, CNTs, QDs, and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

scholarly journals Water uptake of various electrospun nonwovens

2020 ◽  
Vol 6 (3) ◽  
pp. 155-158
Author(s):  
Katharina Wulf ◽  
Volkmar Senz ◽  
Thomas Eickner ◽  
Sabine Illner
Keyword(s):  
Contact Angle ◽  
Surface Modification ◽  
Water Absorption ◽  
Water Uptake ◽  
Biomedical Applications ◽  
High Surface ◽  
Volume Ratio ◽  
Polymer Composition ◽  
Water Wetting ◽  
Morphology Changes

AbstractIn recent years, nanofiber based materials have emerged as especially interesting for several biomedical applications, regarding their high surface to volume ratio. Due to the superficial nano- and microstructuring and the different wettability compared to nonstructured surfaces, the water absorption is an important parameter with respect to the degradation stability, thermomechanic properties and drug release properties, depending on the type of polymer [1]. In this investigation, the water absorption of different non- and plasma modified biostable nanofiber nonwovens based on polyurethane, polyester and polyamide were analysed and compared. Also, the water absorption by specified water wetting, the contact angle and morphology changes were examined. The results show that the water uptake is highly dependent on the surface modification and the polymer composition itself and can therefore be partially changed.

scholarly journals Solar-blind ultraviolet photodetector based on vertically aligned single-crystalline β-Ga2O3 nanowire arrays

Nanophotonics ◽  
2020 ◽  
Vol 9 (15) ◽  
pp. 4497-4503
Author(s):  
Liying Zhang ◽  
Xiangqian Xiu ◽  
Yuewen Li ◽  
Yuxia Zhu ◽  
Xuemei Hua ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Light Trapping ◽  
High Surface ◽  
Volume Ratio ◽  
Average Diameter ◽  
Nanowire Arrays ◽  
Etching Technique ◽  
Inductively Coupled ◽  
Solar Blind ◽  
Vertically Aligned

AbstractVertically aligned nanowire arrays, with high surface-to-volume ratio and efficient light-trapping absorption, have attracted much attention for photoelectric devices. In this paper, vertical β-Ga2O3 nanowire arrays with an average diameter/height of 110/450 nm have been fabricated by the inductively coupled plasma etching technique. Then a metal-semiconductor-metal structured solar-blind photodetector (PD) has been fabricated by depositing interdigital Ti/Au electrodes on the nanowire arrays. The fabricated β-Ga2O3 nanowire PD exhibits ∼10 times higher photocurrent and responsivity than the corresponding film PD. Moreover, it also possesses a high photocurrent to dark current ratio (Ilight/Idark) of ∼104 and a ultraviolet/visible rejection ratio (R260 nm/R400 nm) of 3.5 × 103 along with millisecond-level photoresponse times.

scholarly journals Design Considerations for Borehole Thermal Energy Storage (BTES): A Review with Emphasis on Convective Heat Transfer

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-26 ◽  
Author(s):  
Helge Skarphagen ◽  
David Banks ◽  
Bjørn S. Frengstad ◽  
Harald Gether
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Theoretical Calculations ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Thermal Recovery ◽  
Conductive Heat ◽  
Geological Environment

Borehole thermal energy storage (BTES) exploits the high volumetric heat capacity of rock-forming minerals and pore water to store large quantities of heat (or cold) on a seasonal basis in the geological environment. The BTES is a volume of rock or sediment accessed via an array of borehole heat exchangers (BHE). Even well-designed BTES arrays will lose a significant quantity of heat to the adjacent and subjacent rocks/sediments and to the surface; both theoretical calculations and empirical observations suggest that seasonal thermal recovery factors in excess of 50% are difficult to obtain. Storage efficiency may be dramatically reduced in cases where (i) natural groundwater advection through the BTES removes stored heat, (ii) extensive free convection cells (thermosiphons) are allowed to form, and (iii) poor BTES design results in a high surface area/volume ratio of the array shape, allowing high conductive heat losses. The most efficient array shape will typically be a cylinder with similar dimensions of diameter and depth, preferably with an insulated top surface. Despite the potential for moderate thermal recovery, the sheer volume of thermal storage that the natural geological environment offers can still make BTES a very attractive strategy for seasonal thermal energy storage within a “smart” district heat network, especially when coupled with more efficient surficial engineered dynamic thermal energy stores (DTES).

Sign in / Sign up

Export Citation Format

Share Document