scholarly journals A Review on Biosensors and Recent Development of Nanostructured Materials-Enabled Biosensors

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1109
Author(s):  
Varnakavi. Naresh ◽  
Nohyun Lee
Keyword(s):  
High Surface ◽  
Three Dimensional ◽  
Biological Response ◽  
Volume Ratio ◽  
Recent Decade ◽  
Disease Diagnosis ◽  
Electrical Signal ◽  
Detection Sensitivity ◽  
Wide Range ◽  
Color Tunability

A biosensor is an integrated receptor-transducer device, which can convert a biological response into an electrical signal. The design and development of biosensors have taken a center stage for researchers or scientists in the recent decade owing to the wide range of biosensor applications, such as health care and disease diagnosis, environmental monitoring, water and food quality monitoring, and drug delivery. The main challenges involved in the biosensor progress are (i) the efficient capturing of biorecognition signals and the transformation of these signals into electrochemical, electrical, optical, gravimetric, or acoustic signals (transduction process), (ii) enhancing transducer performance i.e., increasing sensitivity, shorter response time, reproducibility, and low detection limits even to detect individual molecules, and (iii) miniaturization of the biosensing devices using micro-and nano-fabrication technologies. Those challenges can be met through the integration of sensing technology with nanomaterials, which range from zero- to three-dimensional, possessing a high surface-to-volume ratio, good conductivities, shock-bearing abilities, and color tunability. Nanomaterials (NMs) employed in the fabrication and nanobiosensors include nanoparticles (NPs) (high stability and high carrier capacity), nanowires (NWs) and nanorods (NRs) (capable of high detection sensitivity), carbon nanotubes (CNTs) (large surface area, high electrical and thermal conductivity), and quantum dots (QDs) (color tunability). Furthermore, these nanomaterials can themselves act as transduction elements. This review summarizes the evolution of biosensors, the types of biosensors based on their receptors, transducers, and modern approaches employed in biosensors using nanomaterials such as NPs (e.g., noble metal NPs and metal oxide NPs), NWs, NRs, CNTs, QDs, and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

Effects of macroalgal morphology on marine epifaunal diversity

2019 ◽  
Vol 99 (8) ◽  
pp. 1697-1707 ◽  
Author(s):  
Su Xuan Gan ◽  
Ywee Chieh Tay ◽  
Danwei Huang
Keyword(s):  
High Surface ◽  
Algal Species ◽  
High Surface Area ◽  
Three Dimensional ◽  
Volume Ratio ◽  
High Turnover ◽  
Invertebrate Diversity ◽  
Wide Range ◽  
Host Habitat ◽  
Negative Effect

AbstractMacroalgae play important ecological roles, including as hosts for a wide range of epifauna. However, the diversity relationships between macroalgae and epifauna are poorly understood for most tropical host species and algal morphologies. This study aims to characterize and analyse the diversity of invertebrates present amongst macroalgae with three distinct morphologies (three-dimensional, filamentous and foliose) across different tropical intertidal sites in Singapore. Morphological and DNA barcoding tools were employed for epifaunal species identification, and ordination statistics and multiple linear regression were used to test the effects of algal morphology, species and site on community structure and diversity of epiphytic invertebrates. Overall, epifaunal communities were distinct among sites and algal morphologies, and diversity was affected significantly by algal morphology. In particular, filamentous macroalgae hosted the highest abundance of epifauna dominated mainly by amphipods, which were able to take advantage of the high surface area to volume ratio in filamentous algal mats as a consequence of their thinner forms. Foliose species showed a significantly negative effect on invertebrate diversity. Our findings highlight the diverse associations between intertidal macroalgae and invertebrates with high turnover between algal morphology and sites that contribute to the high biodiversity of tropical shores. Future studies should consider the effects of the host habitat, seasonality and more algal species on epifaunal diversity.

scholarly journals Three-dimensional platinum nanoparticle-based bridges for ammonia gas sensing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nishchay A. Isaac ◽  
Johannes Reiprich ◽  
Leslie Schlag ◽  
Pedro H. O. Moreira ◽  
Mostafa Baloochi ◽  
...  
Keyword(s):  
Room Temperature ◽  
Gas Sensing ◽  
Response Times ◽  
High Surface ◽  
Three Dimensional ◽  
Performance Testing ◽  
Volume Ratio ◽  
Platinum Nanoparticle ◽  
Ammonia Gas ◽  
Lift Off

AbstractThis study demonstrates the fabrication of self-aligning three-dimensional (3D) platinum bridges for ammonia gas sensing using gas-phase electrodeposition. This deposition scheme can guide charged nanoparticles to predetermined locations on a surface with sub-micrometer resolution. A shutter-free deposition is possible, preventing the use of additional steps for lift-off and improving material yield. This method uses a spark discharge-based platinum nanoparticle source in combination with sequentially biased surface electrodes and charged photoresist patterns on a glass substrate. In this way, the parallel growth of multiple sensing nodes, in this case 3D self-aligning nanoparticle-based bridges, is accomplished. An array containing 360 locally grown bridges made out of 5 nm platinum nanoparticles is fabricated. The high surface-to-volume ratio of the 3D bridge morphology enables fast response and room temperature operated sensing capabilities. The bridges are preconditioned for ~ 24 h in nitrogen gas before being used for performance testing, ensuring drift-free sensor performance. In this study, platinum bridges are demonstrated to detect ammonia (NH3) with concentrations between 1400 and 100 ppm. The sensing mechanism, response times, cross-sensitivity, selectivity, and sensor stability are discussed. The device showed a sensor response of ~ 4% at 100 ppm NH3 with a 70% response time of 8 min at room temperature.

scholarly journals Continuous tuning of the plasmon resonance frequency of porous gold nanoparticles by mixed oxide layers

2020 ◽  
Vol 27 (6) ◽  
pp. 1583-1588
Author(s):  
Laura Juhász ◽  
Bence Parditka ◽  
Péter Petrik ◽  
Csaba Cserháti ◽  
Zoltán Erdélyi
Keyword(s):  
Gold Nanoparticles ◽  
Resonance Frequency ◽  
Mixed Oxide ◽  
High Surface ◽  
Volume Ratio ◽  
Mixture Ratio ◽  
Optical Extinction ◽  
Oxide Layers ◽  
Porous Gold ◽  
Wide Range

Abstract Porous gold nanoparticles (PGNs) are very popular due to their high surface/volume ratio, moreover they have stronger plasmonic properties than their solid counterparts. These properties make the porous gold nanoparticles very useful for lots of applications, for instance chemical sensors, cancer therapy applications. For applications, however, it is indispensable that the resonance frequency (RF) of a plasmonic structure to be tuneable. In this work we show that the RF can be set in a wide range as desired by coating the PGNs by mixed oxide layers. By changing the composition of the coating layer, that is the mixture ratio, the RF can be shifted practically continuously in a wide range determined by the refractive index of the used oxides. As a demonstration, PGNs were coated with mixed alumina-titania oxide layers (5–7 nm) using plasma-enhanced atomic layer deposition method. The oxide layer, beside as a tuning tool, also stabilises the structure of the PGNs when are exposed to elevated temperature. This is shown by the influence of the temperature (from $$350\, ^{\circ }\hbox {C}$$ 350 ∘ C up to $$900\, ^{\circ }\hbox {C}$$ 900 ∘ C ) on the morphology, and as a consequence the optical extinction spectra, of the oxide coated PGNs.

Color Tuneable Bio-Sensor Made Up From Stimuli-Responsive Nanoparticles

2016 ◽  
Vol 4 (1) ◽  
pp. 06-07
Author(s):  
Aashish Agarwal
Keyword(s):  
Health Care ◽  
Visible Region ◽  
Biological Response ◽  
Health Care Industry ◽  
Clinical Analysis ◽  
Electrical Signal ◽  
Stimuli Responsive ◽  
Care Industry ◽  
Wide Range ◽  
Protein Sensor

A biosensor is a device that is made up of transducer and biological elements [1-3]. The biological elements can be proteins, enzymes or antibodies [1]. The biological elements interact with the analyte which convert the biological response to an electrical signal. So usually biosensor consists of a biological component (acting as a sensor) and an electrical component (for detecting and transmitting the signal). Biosensors have a wide range of applications in different areas of science such as health care industry, clinical analysis and diagnosis of disease and agriculture [4]. In particular, there is a growing interest to prepare bio-sensor using different types of nanomaterials such as gold nanoparticles, carbon nanotubes, quantum dots, etc. [4].In the current proposal, we plan to prepare a low cost protein-sensor using polymeric stimuli-responsive nanoparticles based on diffraction principle. Moreover, this sensor will have a switchable functionality towards pH, temperature and electric field and also can be used with high accuracy of proteins detection based on a simple diffraction principle in the visible region. Since the awareness regarding health and wellbeing is increasing day by day in the global population, the use of biosensors in diagnostics is also simultaneously growing. Thus we believe that our proposed protein sensor based on diffraction principle will also have a popular demand in health care industry. 

Thermal Conductance of a Surface Phonon-Polariton Crystal Made up of Polar Nanorods

2017 ◽  
Vol 72 (2) ◽  
pp. 135-139 ◽  
Author(s):  
Jose Ordonez-Miranda ◽  
Karl Joulain ◽  
Younes Ezzahri
Keyword(s):  
Energy Transport ◽  
High Surface ◽  
High Surface Area ◽  
Three Dimensional ◽  
Thermal Conductance ◽  
Volume Ratio ◽  
Phonon Thermal Conductivity ◽  
Propagation Length ◽  
Surface Phonon ◽  
Surface Phonon Polariton

AbstractWe demonstrate that the energy transport of surface phonon-polaritons can be large enough to be observable in a crystal made up of a three-dimensional assembly of nanorods of silicon carbide. The ultralow phonon thermal conductivity of this nanostructure along with its high surface area-to-volume ratio allows the predominance of the polariton energy over that generated by phonons. The dispersion relation, propagation length, and thermal conductance of polaritons are numerically determined as functions of the radius and temperature of the nanorods. It is shown that the thermal conductance of a crystal with nanorods at 500 K and diameter (length) of 200 nm (20 μm) is 0.55 nW·K−1, which is comparable to the quantum of thermal conductance of polar nanowires.

scholarly journals Inflight fiber printing toward array and 3D optoelectronic and sensing architectures

2020 ◽  
Vol 6 (40) ◽  
pp. eaba0931
Author(s):  
Wenyu Wang ◽  
Karim Ouaras ◽  
Alexandra L. Rutz ◽  
Xia Li ◽  
Magda Gerigk ◽  
...  
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Three Dimensional ◽  
Small Diameter ◽  
Volume Ratio ◽  
Spatiotemporal Resolution ◽  
Fiber Arrays ◽  
Conventional Film ◽  
A Cell ◽  
One Step

Scalability and device integration have been prevailing issues limiting our ability in harnessing the potential of small-diameter conducting fibers. We report inflight fiber printing (iFP), a one-step process that integrates conducting fiber production and fiber-to-circuit connection. Inorganic (silver) or organic {PEDOT:PSS [poly(3,4-ethylenedioxythiophene) polystyrene sulfonate]} fibers with 1- to 3-μm diameters are fabricated, with the fiber arrays exhibiting more than 95% transmittance (350 to 750 nm). The high surface area–to–volume ratio, permissiveness, and transparency of the fiber arrays were exploited to construct sensing and optoelectronic architectures. We show the PEDOT:PSS fibers as a cell-interfaced impedimetric sensor, a three-dimensional (3D) moisture flow sensor, and noncontact, wearable/portable respiratory sensors. The capability to design suspended fibers, networks of homo cross-junctions and hetero cross-junctions, and coupling iFP fibers with 3D-printed parts paves the way to additive manufacturing of fiber-based 3D devices with multilatitude functions and superior spatiotemporal resolution, beyond conventional film-based device architectures.

scholarly journals Graphene-based biosensors

2018 ◽  
Vol 8 (3) ◽  
pp. 20160132 ◽  
Author(s):  
Sabine Szunerits ◽  
Rabah Boukherroub
Keyword(s):  
Biological Samples ◽  
Early Stage ◽  
Point Of Care ◽  
High Surface ◽  
Volume Ratio ◽  
Wide Range ◽  
The Status ◽  
Delays In Diagnosis ◽  
Short Time ◽  
Sensor Interfaces

Reliable data obtained from analysis of DNA, proteins, bacteria and other disease-related molecules or organisms in biological samples have become a fundamental and crucial part of human health diagnostics and therapy. The development of non-invasive tests that are rapid, sensitive, specific and simple would allow patient discomfort to be prevented, delays in diagnosis to be avoided and the status of a disease to be followed up. Bioanalysis is thus a progressive discipline for which the future holds many exciting opportunities. The use of biosensors for the early diagnosis of diseases has become widely accepted as a point-of-care diagnosis with appropriate specificity in a short time. To allow a reliable diagnosis of a disease at an early stage, highly sensitive biosensors are required as the corresponding biomarkers are generally expressed at very low concentrations. In the past 50 years, various biosensors have been researched and developed encompassing a wide range of applications. This contrasts the limited number of commercially available biosensors. When it comes to sensing of biomarkers with the required picomolar (pM) sensitivity for real-time sensing of biological samples, only a handful of sensing systems have been proposed, and these are often rather complex and costly. Lately, graphene-based materials have been considered as superior over other nanomaterials for the development of sensitive biosensors. The advantages of graphene-based sensor interfaces are numerous, including enhanced surface loading of the desired ligand due to the high surface-to-volume ratio, excellent conductivity and a small band gap that is beneficial for sensitive electrical and electrochemical read-outs, as well as tunable optical properties for optical read-outs such as fluorescence and plasmonics. In this paper, we review the advances made in recent years on graphene-based biosensors in the field of medical diagnosis.

scholarly journals Rapid Multianalyte Microfluidic Homogeneous Immunoassay on Electrokinetically Driven Beads

Biosensors ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 212
Author(s):  
Pierre-Emmanuel Thiriet ◽  
Danashi Medagoda ◽  
Gloria Porro ◽  
Carlotta Guiducci
Keyword(s):  
High Surface ◽  
Three Dimensional ◽  
Microfluidic Channel ◽  
Kidney Injury ◽  
Volume Ratio ◽  
Microfluidic System ◽  
Performance Standard ◽  
Neutrophil Gelatinase Associated Lipocalin ◽  
Life Threatening ◽  
Analyte Detection

The simplicity of homogeneous immunoassays makes them suitable for diagnostics of acute conditions. Indeed, the absence of washing steps reduces the binding reaction duration and favors a rapid and compact device, a critical asset for patients experiencing life-threatening diseases. In order to maximize analytical performance, standard systems employed in clinical laboratories rely largely on the use of high surface-to-volume ratio suspended moieties, such as microbeads, which provide at the same time a fast and efficient collection of analytes from the sample and controlled aggregation of collected material for improved readout. Here, we introduce an integrated microfluidic system that can perform analyte detection on antibody-decorated beads and their accumulation in confined regions within 15 min. We employed the system to the concomitant analysis of clinical concentrations of Neutrophil Gelatinase-Associated Lipocalin (NGAL) and Cystatin C in serum, two acute kidney injury (AKI) biomarkers. To this end, high-aspect-ratio, three-dimensional electrodes were integrated within a microfluidic channel to impart a controlled trajectory to antibody-decorated microbeads through the application of dielectrophoretic (DEP) forces. Beads were efficiently retained against the fluid flow of reagents, granting an efficient on-chip analyte-to-bead binding. Electrokinetic forces specific to the beads’ size were generated in the same channel, leading differently decorated beads to different readout regions of the chip. Therefore, this microfluidic multianalyte immunoassay was demonstrated as a powerful tool for the rapid detection of acute life-threatening conditions.

One-dimensional inorganic semiconductor nanostructures: A new carrier for nanosensors

2010 ◽  
Vol 82 (11) ◽  
pp. 2185-2198 ◽  
Author(s):  
Xiaosheng Fang ◽  
Linfeng Hu ◽  
Changhui Ye ◽  
Lide Zhang
Keyword(s):  
High Performance ◽  
High Surface ◽  
Volume Ratio ◽  
Semiconductor Nanostructures ◽  
One Dimensional ◽  
Semiconductor Nanostructure ◽  
Research Activities ◽  
Wide Range ◽  
Inorganic Semiconductor ◽  
Art Research

One-dimensional (1D) inorganic semiconductor nanostructures have witnessed an explosion of interest over the last decade because of advances in their controlled synthesis and unique property and potential applications. A wide range of gases, chemicals, biomedical nanosensors, and photodetectors have been assembled using 1D inorganic semiconductor nanostructures. The high-performance characteristics of these nanosensors are particularly attributable to the inorganic semiconducting nanostructure high surface-to-volume ratio (SVR) and its rationally designed surface. In this review, we provide a brief summary of the state-of-the-art research activities in the field of 1D inorganic semiconductor nanostructure-based nanosensors. Some perspectives and the outlook for future developments in this area are presented.

scholarly journals Methods for tuning plasmonic and photonic optical resonances in high surface area porous electrodes

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Lauren M. Otto ◽  
E. Ashley Gaulding ◽  
Christopher T. Chen ◽  
Tevye R. Kuykendall ◽  
Aeron T. Hammack ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystals ◽  
Titanium Nitride ◽  
Surface Area ◽  
Periodic Structures ◽  
High Surface ◽  
High Surface Area ◽  
Three Dimensional ◽  
Porous Electrodes ◽  
Wide Range

AbstractSurface plasmons have found a wide range of applications in plasmonic and nanophotonic devices. The combination of plasmonics with three-dimensional photonic crystals has enormous potential for the efficient localization of light in high surface area photoelectrodes. However, the metals traditionally used for plasmonics are difficult to form into three-dimensional periodic structures and have limited optical penetration depth at operational frequencies, which limits their use in nanofabricated photonic crystal devices. The recent decade has seen an expansion of the plasmonic material portfolio into conducting ceramics, driven by their potential for improved stability, and their conformal growth via atomic layer deposition has been established. In this work, we have created three-dimensional photonic crystals with an ultrathin plasmonic titanium nitride coating that preserves photonic activity. Plasmonic titanium nitride enhances optical fields within the photonic electrode while maintaining sufficient light penetration. Additionally, we show that post-growth annealing can tune the plasmonic resonance of titanium nitride to overlap with the photonic resonance, potentially enabling coupled-phenomena applications for these three-dimensional nanophotonic systems. Through characterization of the tuning knobs of bead size, deposition temperature and cycle count, and annealing conditions, we can create an electrically- and plasmonically-active photonic crystal as-desired for a particular application of choice.

Sign in / Sign up

Export Citation Format

Share Document