scholarly journals Preparation and in vitro Characterisation of Solid Dispersion Floating Tablet by Effervescent Control Release Technique with Improved Floating Capabilities

2020 ◽  
Author(s):  
Peeush Singhal ◽  
Rajneesh Dutt Kaushik ◽  
Vijay Jyoti Kumar
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersions ◽  
Diclofenac Sodium ◽  
In Vitro Release ◽  
Control Release ◽  
Release Mechanism ◽  
Thermal Method ◽  
Zero Order Release ◽  
Floating Tablet

In this research, an effort has been done for the development of effervescent controlled release floating tablet (ECRFT) from solid dispersions (SDs) of diclofenac sodium (DS) for upsurge the solubility and dissolution rate. ECRFT of DS was prepared by using SDs of DS and its SDs prepared with PEG as carrier using thermal method (simple fusion). SDs of DS was formulated in many ratios (1:1, 1:2, 1:3 and 1:4). Prepared SDs were optimised for its solubility, % drug content and % dissolution studies. Tablets were formulated by using optimised SDs products and all formulation was evaluated for various parameters. A clear rise in dissolution rate was detected with entirely SD, amid that the optimised SD (SD4) was considered for ECRFT. Among all the tablet formulations, its F3 formulation was better in all the terms of pre-compression and post-compression parameters. It had all the qualities of a good ECRFT, based on this F3 formulation was selected as the best formulation. Data of in vitro release were fitted in several kinetics models to explain release mechanism. The F3 formulation shows zero order release. From this study, we can conclude that ECRFT containing SDs of DS can be successfully used for achieving better therapeutic objective.

scholarly journals Novel Gliclazide Electrosprayed Nano-Solid Dispersions: Physicochemical Characterization and Dissolution Evaluation

2019 ◽  
Vol 9 (2) ◽  
pp. 231-240
Author(s):  
Khosro Adibkia ◽  
Solmaz Ghajar ◽  
Karim Osouli-Bostanabad ◽  
Niloufar Balaei ◽  
Shahram Emami ◽  
...  
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Physicochemical Characterization ◽  
Amorphous State ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Peg 6000

Purpose: In the current study, electrospraying was directed as a novel alternative approach to improve the physicochemical attributes of gliclazide (GLC), as a poorly water-soluble drug, by creating nanocrystalline/amorphous solid dispersions (ESSs). Methods: ESSs were formulated using Eudragit® RS100 and polyethylene glycol (PEG) 6000 as polymeric carriers at various drug: polymer ratios (i.e. 1:5 and 1:10) with different total solution concentrations of 10, 15, and 20% w/v. Morphological, physicochemical, and in-vitro release characteristics of the developed formulations were assessed. Furthermore, GLC dissolution behaviors from ESSs were fitted to various models in order to realize the drug release mechanism. Results: Field emission scanning electron microscopy analyses revealed that the size and morphology of the ESSs were affected by the drug: polymer ratios and solution concentrations. The polymer ratio augmentation led to increase in the particle size while the solution concentration enhancement yielded in a fiber establishment. Differential scanning calorimetry and powder X-ray diffraction investigations demonstrated that the ESSs were present in an amorphous state. Furthermore, the in vitro drug release studies depicted that the samples prepared employing PEG 6000 as carrier enhanced the dissolution rate and the model that appropriately fitted the release behavior of ESSs was Weibull model, where demonstrating a Fickian diffusion as the leading release mechanism. Fourier-transform infrared spectroscopy results showed a probability of complexation or hydrogen bonding, development between GLC and the polymers in the solid state. Conclusion: Hence the electrospraying system avails the both nanosizing and amorphization advantages, therefore, it can be efficiently applied to formulating of ESSs of BCS Class II drugs.

Grewia asiatica Mucilage: A Smart Gelling Polymeric Material for Pharmaceutical Applications In Vitro Studies

2020 ◽  
Vol 12 (2) ◽  
pp. 117-126
Author(s):  
Nitin Gupta ◽  
Giriraj T. Kulkarni ◽  
Pravin Kumar ◽  
Rajendra Awasthi
Keyword(s):  
Drug Release ◽  
Polymeric Material ◽  
Diclofenac Sodium ◽  
Skin Irritation ◽  
In Vitro Release ◽  
Penetration Enhancers ◽  
Release Mechanism ◽  
Drug Release Profile ◽  
Therapeutic Benefits

Background: Natural plant-based materials have several advantages. They are biodegradable, biocompatible, non-toxic, cost-effective, environment friendly, easily available, and can undergo chemical modification. Objective: Grewia asiatica extracts contain various phytoconstituents and have therapeutic benefits such as antimicrobial and anti-diabetic properties. They form colloidal dispersions and make a highly viscous gel in water. Considering these properties of Grewia asiatica mucilage, the present work was aimed to investigate its application in the formulation of gel for the topical delivery of diclofenac sodium. Method: Gel formulations were prepared with and without penetration enhancers using 1% w/w diclofenac sodium as a model drug. The formulations were subjected to different evaluation tests like physical characterization, pH, spreadability, skin irritation, gel retrogradation, drug content and in vitro drug diffusion. The in vitro diffusion of the drug from different formulations was compared with the in vitro drug release profile of the marketed formulation (Omni gel, Cipla, India). To assess the release mechanism, the in vitro release data was analyzed using Korsmeyers-Peppas’ equation. Results: The mucilage showed good gelling behavior in 5.50, 5.75, 6.00, 6.25 and 6.50% concentrations. All the formulations followed the anomalous transport mechanism of drug release. The formulation BP3 showed 90% of drug release after 5.2h of dissolution study, which was similar to the marketed formulation. Hence, formulation BP3 was ideal among all the formulations. Conclusion: It might be concluded that, the Grewia asiatica mucilage may be used as a natural polymeric material for gel formulation.

Influence of β-Cyclodextrin and Hydroxypropyl-β-Cyclodextrin on Enhancement of Solubility and Dissolution of Isradipine

2017 ◽  
Vol 10 (3) ◽  
pp. 3752-3757
Author(s):  
Narendar D ◽  
Ettireddy S
Keyword(s):  
Inclusion Complex ◽  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physical Stability ◽  
Molecular Complexes ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Phase Solubility ◽  
Cyclodextrin Complexation

The content of this investigation was to study the influence of β-cyclodextrin and hydroxy propyl-β-cyclodextrin complexation on enhancement of solubility and dissolution rate of isradipine. Based on preliminary phase solubility studies, solid complexes prepared by freeze drying method in 1:1 molar ratio were selected and characterized by DSC for confirmation of complex formation. Prepared solid dispersions were evaluated for drug content, solubility and in vitro dissolution. The physical stability of optimized formulation was studied at refrigerated and room temperature for 2 months. Solid state characterization of optimized complex performed by DSC and XRD studies.  Dissolution rate of isradipine was increased compared with pure drug and more with HP-β-CD inclusion complex than β-CD. DSC and XRD analyzes that drug was in amorphous form, when the drug was incorporated as isradipine β-CD and HP-β-CD inclusion complex. Stability studies resulted in low or no variations in the percentage of complexation efficiency suggesting good stability of molecular complexes. The results conclusively demonstrated that the enhancement of solubility and dissolution rate of isradipine by drug-cyclodextrin complexation was achieved.   

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Formulation Design and Optimization of Repaglinide Solid Dispersions by Central Composite Design

2018 ◽  
Vol 11 (6) ◽  
pp. 4337-4348
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Srinivas I
Keyword(s):  
Central Composite Design ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Solvent Evaporation ◽  
Release Mechanism ◽  
Solvent Evaporation Method ◽  
Onset Of Action ◽  
Evaporation Method ◽  
Central Composite

Repaglinide is a pharmaceutical drug used for the treatment of type II diabetes mellitus, it is characterized with poor solubility which limits its absorption and dissolution rate and delays onset of action. In the present study, immediate release solid dispersion of repaglinide was formulated by solvent evaporation technique. Repaglinide solid dispersions were prepared using PEG 8000, Pluronic F 127 and Gelucire 44/14 by solvent evaporation method. A 3-factor, 3-level central composite design employed to study the effect of each independent variable on dependent variables. FTIR studies revealed that no drug excipient interaction takes place. From powder X-ray diffraction (p-XRD) and by scanning electron microscopy (SEM) studies it was evident that polymorphic form of repaglinide has been converted into an amorphous form from crystalline within the solid dispersion formulation. The correlation coefficient showed that the release profile followed Higuchi model anomalous behavior and hence release mechanism was indicative of diffusion. The obtained results suggested that developed solid dispersion by solvent evaporation method might be an efficacious approach for enhancing the solubility and dissolution rate of repaglinide.

Formulation and Characterization of Glimepiride Nanoparticles for Dissolution Enhancement

2020 ◽  
Vol 10 (5) ◽  
pp. 649-663
Author(s):  
Reena Siwach ◽  
Parijat Pandey ◽  
Harish Dureja
Keyword(s):  
Drug Release ◽  
Dissolution Rate ◽  
Oral Absorption ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Class Ii ◽  
Dissolution Enhancement ◽  
In Vitro Drug Release ◽  
Bcs Class Ii

Background: The rate-limiting step in the oral absorption of BCS class II drugs is dissolution. Their low solubility is one of the major obstacles in the process of drug development. Dissolution rate can be increased by decreasing the particle size to the nano range, eventually leading to increased bioavailability. Objective: : In the present study, glimepiride loaded nanoparticles were prepared to enhance the dissolution rate. The aim of the work was to examine the effect of polymer-drug ratio, solvent-antisolvent ratio and speed of mixing on in vitro release of glimepiride. Methods: Glimepiride is an antidiabetic drug belonging to the BCS class II drugs. The polymeric nanoparticles were formulated according to Box-Behnken Design (BBD) using nanoprecipitation technique. The prepared nanoparticles were evaluated for in vitro drug release, loading capacity, entrapment efficiency, and percentage yield. Result: It was found that NP-8 has maximum in vitro drug release and was selected as an optimized batch. Analysis of Variance (ANOVA) was applied to the in vitro drug release to study the fitness and significance of the model. The batch NP-8 showed 70.34 ± 1.09% in vitro drug release in 0.1 N methanolic HCl and 92.02 ± 1.87% drug release in phosphate buffer pH 7.8. The release data revealed that the nanoparticles followed zero order kinetics. Conclusion: The study revealed that the incorporation of glimepiride into gelucire 50/13 resulted in enhanced dissolution rate.

Development and Evaluation of Trans Buccal Patches based on Natural and Synthetic Polymers Loaded with Rivastigmine using Solvent Casting Technique

2021 ◽  
pp. 5133-5140
Author(s):  
Prasanta Kumar Mohapatra ◽  
Boddu Pavan Kumar ◽  
Pankaj Singh Patel ◽  
Harish Chandra Verma ◽  
Satyajit Sahoo
Keyword(s):  
Drug Release ◽  
Kinetic Equations ◽  
Moisture Loss ◽  
Release Mechanism ◽  
Solvent Casting ◽  
Casting Technique ◽  
Weight Variation ◽  
Zero Order Release ◽  
Buccal Films

Mucoadhesive buccal films of rivastigmine were prepared by the solvent casting technique using HPMC K15M, sodium alginate, glycerine, and Eudragit RL100. Arranged films assessed for weight variation, thickness, % drug substance, % moisture loss, % moisture take-up, folding endurance, in-vitro medicament release, and Fourier transform Infrared spectroscopy (FTIR). The films showed a controlled release (CR) over 8 h. The preparation observed to be a worthy candidate for the development of buccal patches for therapeutic purposes. Drug-polymer compatibility considers FTIR demonstrated no contradiction between the medicament and the polymers. The optimized formulation found F7 indicated drug release 85% at the end of 8 h. Thinking about the correlation coefficient (R2) values got from the kinetic equations, the drug release from the formulations F1-F8 has discovered zero-order release mechanism. It can be concluded that oral buccal patches of rivastigmine, for treatment of Alzheimer’s and Parkinson’s disease, can be formulated. The study suggests that rivastigmine can be conveniently administered orally in the form of buccal patches, with the lesser occurrence of its side effects and improved bioavailability.

Formulation and evaluation of proniosome loaded sertaconazole nitrate for topical application

2021 ◽  
Vol 1 (2) ◽  
pp. 023-037
Author(s):  
Shailaja D ◽  
Latha K ◽  
Manasa D ◽  
Shirisha A ◽  
Padmavathi R ◽  
...  
Keyword(s):  
Ex Vivo ◽  
Release Kinetics ◽  
Skin Irritation ◽  
Water Soluble ◽  
Ionic Surfactants ◽  
Release Mechanism ◽  
Stability Studies ◽  
Zero Order Release ◽  
Poorly Soluble

Proniosomal technology is a novel solution for poorly soluble drugs. Proniosomes are water-soluble carrier particles which are coated with non-ionic surfactants. Proniosomal gels were prepared by coacervation phase separation method using non-ionic surfactants, lipid carriers and cholesterol as a membrane stabilizer. FTIR compatibility studies revealed that the drug and excipients were compatible. All formulations were evaluated for pH, drug content, extrudability, spreadability, viscosity, in-vitro, ex-vivo, skin irritation and stability studies. Among formulations prepared, F80H1 has shown higher % EE (83.02) and least diffusion through dialysis membrane i.e., 17.68%. With ex-vivo studies, F80H1 formulation has shown highest skin deposition and lower flux of sertaconazole nitrate through the rat skin. F80H1 was selected as final optimized formulation. F80H1 exhibited good stability and SEM studies revealed that the vesicles were spherical in shape. The optimized formulation was found to follow zero order release kinetics and korsmeyer-peppas release mechanism. F80H1 found to be non-irritant and stable from skin irritation and stability studies.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals FABRICATION OF NANO CLAY INTERCALATED POLYMERIC MICROBEADS FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 206-215
Author(s):  
DHARMENDER PALLERLA ◽  
SUMAN BANOTH ◽  
SUNKARI JYOTHI
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Simulated Gastric Fluid ◽  
Release Mechanism ◽  
Release Studies ◽  
Swelling Studies ◽  
Vitro Release

Objective: The objective of this study was to formulate and evaluate the Curcumin (CUR) encapsulated sodium alginate (SA)/badam gum (BG)/kaolin (KA) microbeads for controlled drug release studies. Methods: The fabricated microbeads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Dynamic swelling studies and in vitro release kinetics were performed in simulated intestinal fluid (pH 7.4) and simulated gastric fluid (pH 1.2) at 37 °C. Results: FTIR confirms the formation of microbeads. DSC studies confirm the polymorphism of CUR in drug loaded microbeads which indicate the molecular level dispersion of the drug in the microbeads. SEM studies confirmed the microbeads are spherical in shape with wrinkled and rough surfaces. XRD studies reveal the molecular dispersion of CUR and the presence of KA in the developed microbeads. In vitro release studies and swelling studies depend on the pH of test media, which might be suitable for intestinal drug delivery. The % of drug release values fit into the Korsmeyer-Peppas equation and n values are obtained in the range of 0.577-0.664, which indicates that the developed microbeads follow the non-Fickian diffusion drug release mechanism. Conclusion: The results concluded that the CUR encapsulated microbeads are potentially good carriers for controlled drug release studies.

Sign in / Sign up

Export Citation Format

Share Document