scholarly journals Novel Gliclazide Electrosprayed Nano-Solid Dispersions: Physicochemical Characterization and Dissolution Evaluation

2019 ◽  
Vol 9 (2) ◽  
pp. 231-240
Author(s):  
Khosro Adibkia ◽  
Solmaz Ghajar ◽  
Karim Osouli-Bostanabad ◽  
Niloufar Balaei ◽  
Shahram Emami ◽  
...  
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Physicochemical Characterization ◽  
Amorphous State ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Peg 6000

Purpose: In the current study, electrospraying was directed as a novel alternative approach to improve the physicochemical attributes of gliclazide (GLC), as a poorly water-soluble drug, by creating nanocrystalline/amorphous solid dispersions (ESSs). Methods: ESSs were formulated using Eudragit® RS100 and polyethylene glycol (PEG) 6000 as polymeric carriers at various drug: polymer ratios (i.e. 1:5 and 1:10) with different total solution concentrations of 10, 15, and 20% w/v. Morphological, physicochemical, and in-vitro release characteristics of the developed formulations were assessed. Furthermore, GLC dissolution behaviors from ESSs were fitted to various models in order to realize the drug release mechanism. Results: Field emission scanning electron microscopy analyses revealed that the size and morphology of the ESSs were affected by the drug: polymer ratios and solution concentrations. The polymer ratio augmentation led to increase in the particle size while the solution concentration enhancement yielded in a fiber establishment. Differential scanning calorimetry and powder X-ray diffraction investigations demonstrated that the ESSs were present in an amorphous state. Furthermore, the in vitro drug release studies depicted that the samples prepared employing PEG 6000 as carrier enhanced the dissolution rate and the model that appropriately fitted the release behavior of ESSs was Weibull model, where demonstrating a Fickian diffusion as the leading release mechanism. Fourier-transform infrared spectroscopy results showed a probability of complexation or hydrogen bonding, development between GLC and the polymers in the solid state. Conclusion: Hence the electrospraying system avails the both nanosizing and amorphization advantages, therefore, it can be efficiently applied to formulating of ESSs of BCS Class II drugs.

scholarly journals FABRICATION OF NANO CLAY INTERCALATED POLYMERIC MICROBEADS FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 206-215
Author(s):  
DHARMENDER PALLERLA ◽  
SUMAN BANOTH ◽  
SUNKARI JYOTHI
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Simulated Gastric Fluid ◽  
Release Mechanism ◽  
Release Studies ◽  
Swelling Studies ◽  
Vitro Release

Objective: The objective of this study was to formulate and evaluate the Curcumin (CUR) encapsulated sodium alginate (SA)/badam gum (BG)/kaolin (KA) microbeads for controlled drug release studies. Methods: The fabricated microbeads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Dynamic swelling studies and in vitro release kinetics were performed in simulated intestinal fluid (pH 7.4) and simulated gastric fluid (pH 1.2) at 37 °C. Results: FTIR confirms the formation of microbeads. DSC studies confirm the polymorphism of CUR in drug loaded microbeads which indicate the molecular level dispersion of the drug in the microbeads. SEM studies confirmed the microbeads are spherical in shape with wrinkled and rough surfaces. XRD studies reveal the molecular dispersion of CUR and the presence of KA in the developed microbeads. In vitro release studies and swelling studies depend on the pH of test media, which might be suitable for intestinal drug delivery. The % of drug release values fit into the Korsmeyer-Peppas equation and n values are obtained in the range of 0.577-0.664, which indicates that the developed microbeads follow the non-Fickian diffusion drug release mechanism. Conclusion: The results concluded that the CUR encapsulated microbeads are potentially good carriers for controlled drug release studies.

scholarly journals DEVELOPMENT AND EVALUATION OF MONOLITHIC OSMOTIC TABLET OF KETOPROFEN: USING SOLID DISPERSION TECHNIQUE

2016 ◽  
Vol 8 (12) ◽  
pp. 41
Author(s):  
S. Kaushik ◽  
Kamla Pathak
Keyword(s):  
Solid Dispersion ◽  
Solid Dispersions ◽  
Amorphous State ◽  
Immediate Release ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Peg 6000 ◽  
Environmental Media ◽  
Dispersion Technique

<p><strong>Objective: </strong>The aim of the present study was to develop and evaluate the monolithic osmotic tablet (MOT) composed of the solid dispersion of ketoprofen (KETO), a poorly water-soluble drug. Solid dispersion technique is generally used for immediate release, as this maximizes the amount of drug absorbed. Sustained release may be obtained by combining solid dispersion technique with MOT so as to increase the therapy efficacy and patient compliance.</p><p><strong>Methods: </strong>Solid dispersion of KETO was prepared by using solvent melt method with polyethylene glycol (PEG) 6000, a hydrophilic carrier. The ratio of KETO to PEG 6000 were 1:1, 1:3 and 1:5 (%w/w). These solid dispersions were characterized by differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA) and powder X-ray diffraction (PXRD) to ascertain whether there were any physicochemical interactions between drug and carrier.</p><p>The tablet core was prepared by using Polyox N80 (a suspending agent), sodium chloride (an osmotic agent), a solid dispersion consisting of PEG 6000 and KETO followed by a coating of cellulose acetate to make the monolithic osmotic tablet.</p><p><strong>Results: </strong>The results of DSC and PXRD indicated that the drug was in the amorphous state in solid dispersion when PEG 6000 was used as a carrier. The dissolution rate of the solid dispersion was much faster than those for the corresponding physical mixture and pure drug. The optimized MOT formulations were able to deliver KETO at the constant zero order release, above 95% <em>in vitro</em>, independent to environmental media and stirring rate. The release rate of KETO in the MOT is controlled by osmotic pressure, suspending agent and drug solubility in solid dispersion.</p><p><strong>Conclusion: </strong>The monolithic osmotic tablet containing solid dispersion has great potential in the controlled delivery of ketoprofen, a water-insoluble drug.</p><p><strong>Keywords: </strong>Ketoprofen, Monolithic osmotic tablet, Solid dispersion, Water insoluble</p>

scholarly journals FABRICATION OF SODIUM ALGINATE/GUM GHATTI IPN MICROBEADS INTERCALATED WITH KAOLIN NANO CLAY FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 233-241
Author(s):  
D. GANESH ◽  
P. SURESH ◽  
G. SRINIVAS RAO
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Sodium Alginate ◽  
In Vitro Release ◽  
Kinetic Equations ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Nano Clay ◽  
Gum Ghatti

Objective: The objective of this study is to fabricate sodium alginate (SA)/gum ghatti (GG) microbeads intercalated with Kaolin (KA) nano clay for the sustained release of curcumin (CUR). Methods: The microbeads were prepared by a simple ionotropic gelation technique. The developed beads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Swelling studies and in vitro release studies were investigated under both pH 7.4 and pH 1.2 at 37 °C. Results: The developed microbeads were characterized by FTIR, which confirms the interaction between CUR, polymeric matrix and KA. DSC and XRD analysis reveals that the CUR has molecularly dispersed in the polymer matrix. In vitro results illustrated that microbeads were influenced by the pH of test media, which might be suitable for intestinal drug delivery. The drug release mechanism was analyzed by fitting the release data into different kinetic equations and n values are obtained in the range of 0.609-0.640, suggesting that the developed microbeads showed the non-Fickian diffusion type drug release. Conclusion: These results clearly illustrated that the developed KA intercalated polymeric microbeads are potential drug carriers for the controlled release of CUR.

scholarly journals Doxycycline and Monocaprin In Situ Hydrogel: Effect on Stability, Mucoadhesion and Texture Analysis and In Vitro Release

Gels ◽  
2019 ◽  
Vol 5 (4) ◽  
pp. 47 ◽  
Author(s):  
Venu Gopal Reddy Patlolla ◽  
William Peter Holbrook ◽  
Sveinbjorn Gizurarson ◽  
Thordis Kristmundsdottir
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Fickian Diffusion ◽  
Release Time ◽  
Release Mechanism ◽  
Oral Diseases ◽  
Zero Order Kinetics ◽  
In Situ Hydrogel

The aim of this study was to develop a stable aqueous formulation containing a combination of doxycycline and monocaprin in clinically relevant concentrations. Increase in expression of Matrix metalloproteinases (MMPs) and microbial role in oral diseases is well established and the combination of above active ingredients could be potentially beneficial in treatment of oral mucosal conditions. The hydrogels containing different concentrations of doxycycline and monocaprin in the presence and absence of stabilizing excipients were developed and their stabilities were studied at 4 °C for up to 1 year. The drug–drug interaction was evaluated using Fourier-transform infrared spectroscopy (FTIR). The addition of monocaprin on doxycycline in situ hydrogel’s mucoadhesiveness, texture properties and drug release mechanism was studied. The addition of monocaprin negatively affected the doxycycline stability and was concentration dependent, whereas monocaprin was stable up to 1 year. Doxycycline did not interfere with the anti-Candidal activity of monocaprin. Furthermore, the presence of monocaprin significantly affected the formulation hardness, compressibility and adhesiveness. Monocaprin and doxycycline release followed zero order kinetics and the release mechanism was, by anomalous (non-Fickian) diffusion. The addition of monocaprin increased the drug release time and altered the release mechanism. It is possible to stabilize doxycycline in the presence of monocaprin up to 1 year at 4 °C.

scholarly journals COMPARISON AND CHARACTERIZATION OF INCLUSION COMPLEXES AND SOLID DISPERSIONS IN ENHANCEMENT OF DISSOLUTION RATE OF POORLY WATER SOLUBLE DRUG

2018 ◽  
Vol 10 (5) ◽  
pp. 173
Author(s):  
Radha Rani Earle ◽  
Rambabu Jammu ◽  
Lakshmi Usha ◽  
Ratna Kanth Lingam
Keyword(s):  
Drug Release ◽  
Dissolution Rate ◽  
Inclusion Complexes ◽  
Solid Dispersions ◽  
Water Soluble ◽  
Peg 6000 ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

Objective: The purpose of the present study was to enhance solubility and dissolution characteristics of indomethacin by preparing inclusion complexes with hydroxypropyl β-cyclodextrin (HP β-CD) and solid dispersions with PEG 6000 to enhance its in vitro drug release and to further formulate it as a tabletMethods: Solid dispersions (SDs) and inclusion complexes (ICs) of Indomethacin with PEG 6000 and HP β-CD respectively were prepared to enhance the dissolution rate of this poorly water-soluble drug belonging to BCS class II. A comparison was made between two systems: solid dispersions with PEG 6000 obtained using melting and solvent evaporation technique, inclusion complexes with HP β-CD prepared by kneading technique. SDs were prepared in 1:1, 1:2, 1:3 and ICs in 1:0.25, 1:0.5, 1:1 w/w ratios of drug: polymer. Both the systems were characterized by FTIR, SEM, DSC, X-RD.Results: The dissolution of indomethacin increased with the increase in the concentration of the polymers. F4 and F9 formulations showed complete drug release in less than 30 min. Dissolution studies indicated that cyclodextrin complexes showed a better enhancement of dissolution rate when compared to solid dispersions. CDs were found to be more effective than PEGs at lower concentrations. These formulations were further compressed as tablets.Conclusion: The FTIR and DSC studies showed that no interactions existed between the drug and the polymer.

Formulation and Evaluation of Chlorpheniramine Maleate Troches

2019 ◽  
Vol 12 (5) ◽  
pp. 4656-4665
Author(s):  
Rajitha K ◽  
Rashmitha G ◽  
Sharanya B ◽  
Swathi A
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
Binding Capacity ◽  
In Vitro Release ◽  
Physicochemical Characterization ◽  
Release Mechanism ◽  
Average Weight ◽  
Content Uniformity ◽  
Chlorpheniramine Maleate

The present study was sought to prepare Chlorphenamine (also called chlorpheniramine) maleate troches. Chlorpheni-ramine maleate (CPM) is a first-generation alkyl amine anti histamine used in the prevention of the symptoms of allergic conditions such as rhinitis and urticarial having oral bio availability about 25-50%, it undergoes first pass metabolism. Troches containing CPM was prepared by non-aqueous granulation technology using Xanthum gum, Gum acacia, HPMC K4M and tragacanth and guar gum as the polymers.  The effect of varying the concentration of polymer on release of Chlorpheniramine maleate (CPM) from troches was investigated. Differential scanning calorimetry and X-ray powder diffraction spectroscopy were used for physicochemical characterization. Tablets prepared were evaluated for different parameters such as average weight, hardness, Carr’s index, tapped density, friability, disintegration, content uniformity test. All the parameters were found within the specifications. The drug content was estimated by UV spectrophotometer at 261 nm. In vitro drug release studies of troches formulations were performed in artificial saliva pH 6.8 at 37±1oC. Among the all polymers used the highest drug release is shown with xanthum gum due to its less binding capacity. The in vitro release data was subjected to zero order, first order, Higuchi, Korsemeyer-Peppas, Hixon crowell and erosion model in order to establish the drug release mechanism and kinetics of drug release from the lozenge tablets.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

scholarly journals In Vitro Drug Release, Permeability, and Structural Test of Ciprofloxacin-Loaded Nanofibers

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 556
Author(s):  
Luca Éva Uhljar ◽  
Sheng Yuan Kan ◽  
Norbert Radacsi ◽  
Vasileios Koutsos ◽  
Piroska Szabó-Révész ◽  
...  
Keyword(s):  
Amorphous State ◽  
Physical Mixture ◽  
Water Soluble ◽  
Vinyl Pyrrolidone ◽  
Amorphous Solid Dispersion ◽  
Release Mechanism ◽  
Dissolution Studies ◽  
In Vitro Diffusion ◽  
Poly Vinyl Pyrrolidone

Nanofibers of the poorly water-soluble antibiotic ciprofloxacin (CIP) were fabricated in the form of an amorphous solid dispersion by using poly(vinyl pyrrolidone) as a polymer matrix, by the low-cost electrospinning method. The solubility of the nanofibers as well as their in vitro diffusion were remarkably higher than those of the CIP powder or the physical mixture of the two components. The fiber size and morphology were optimized, and it was found that the addition of the CIP to the electrospinning solution decreased the nanofiber diameter, leading to an increased specific surface area. Structural characterization confirmed the interactions between the drug and the polymer and the amorphous state of CIP inside the nanofibers. Since the solubility of CIP is pH-dependent, the in vitro solubility and dissolution studies were executed at different pH levels. The nanofiber sample with the finest morphology demonstrated a significant increase in solubility both in water and pH 7.4 buffer. Single medium and two-stage biorelevant dissolution studies were performed, and the release mechanism was described by mathematical models. Besides, in vitro diffusion from pH 6.8 to pH 7.4 notably increased when compared with the pure drug and physical mixture. Ciprofloxacin-loaded poly(vinyl pyrrolidone) (PVP) nanofibers can be considered as fast-dissolving formulations with improved physicochemical properties.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

Sign in / Sign up

Export Citation Format

Share Document