scholarly journals Applications of Glass Fibers in 3D Preform Composites

2018 ◽  
Author(s):  
Kadir Bilisik ◽  
Gaye Kaya ◽  
Huseyin Ozdemir ◽  
Mahmut Korkmaz ◽  
Gulhan Erdogan
Keyword(s):  
Glass Fibers

Failure Localization of Intermittent Short Failures Caused by Vertical Conductive Anodic Filament Formation

2014 ◽  
Author(s):  
Daniel Nuez ◽  
Phoumra Tan
Keyword(s):  
Glass Fibers ◽  
Vertical Plane ◽  
Axis Formation ◽  
Metal Trace ◽  
Conductive Anodic Filament ◽  
Plated Through Hole ◽  
Voltage Gradients ◽  
Ic Package ◽  
Through Hole ◽  
Failure Localization

Abstract Conductive anodic filament (CAF) formation is a mechanism caused by an electrochemical migration of metals from a metal trace in ICs or in PCBs. This is commonly caused by the moisture build-up in the affected metal terminals in an IC package or PC board caused by critical temperature, high humidity and high voltage gradients conditions. This phenomenon is known to have caused catastrophic field failures on various OEMs electronic components in the past [1,7]. Most published articles on CAF described the formation of the filament in a lateral formation through the glass fiber interfaces between two adjacent metal planes [1-6, 8-12]. One common example is the CAF formation seen between PTH (Plated through Hole) in the laminated substrate with two different potentials causing shorts [1-6, 8-12]. In this paper, the Cu filament grows in a vertical fashion (z-axis formation) creating a vertical plane shorts between the upper and lower metal terminals in a laminated IC package substrate. The copper growth migration does not follow the fiber strands laterally or vertically through them. Instead, it grows through the stress created gaps between the impregnated carbon epoxy fillers from the upper metal trace to the lower metal trace with two different potentials, between the glass fibers. This vertical CAF mechanism creates a low resistive short that was sometimes found to be intermittent in nature. This paper presents some successful failure analysis approaches used to isolate and detect the failure locations for this type of failing devices. This paper also exposes the unique physical appearance of the vertical CAF formation.

Correlation of fatigue behavior and dynamic mechanical properties of hybrid composites of polypropylene/short glass fibers/hollow glass beads

2021 ◽  
pp. 089270572199319
Author(s):  
Gustavo B Carvalho
Keyword(s):  
Stress Relaxation ◽  
Flexural Strength ◽  
Relaxation Rate ◽  
Hybrid Composites ◽  
Fatigue Behavior ◽  
Glass Fibers ◽  
Glass Beads ◽  
Hollow Glass ◽  
Dynamic Mechanical ◽  
Short Glass

Ternary hybrid composites of Polypropylene (PP)/Short Glass Fibers (GF)/Hollow Glass Beads (HGB) were prepared using untreated and aminosilane-treated HGB, compatibilized with maleated-PP, and with varying total and relative GF/HGB contents. Static/short-term flexural strength properties data revealed, through lower flexural strength values, that the presence of untreated HGB particles induces to fiber-polymer interfacial decoupling at much higher extent than in the presence of aminosilane-treated HGB particles. This phenomenon is also evident when evaluating the data from displacement-controlled three-point bending fatigue tests. Monitored up to 106 cycles, the analyzed hybrid composites presented distinct performance relative to their fatigue stress relaxation rate: the lower the matrix-reinforcements’ interfacial adhesion, more pronounced the stress relaxation rate as a function of the number of fatigue cycles. Dynamic Mechanical Thermal Analysis (DMTA) results could successfully reveal the hybrid composites behavior at the microstructural level when they were submitted to both static flexural test and fatigue, depending on the degree of interfacial interactions between the polymer matrix of PP and the hybrid reinforcements of GF and HGB (with and without aminosilane surface treatment).

scholarly journals Effects of Microwave Treatment in Immersed Conditions on the Mechanical Properties of Jute Yarn

Fibers ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 40
Author(s):  
Felicia Syrén ◽  
Joel Peterson ◽  
Nawar Kadi
Keyword(s):  
Mechanical Properties ◽  
Tensile Testing ◽  
Glass Fibers ◽  
Microwave Treatment ◽  
Environmental Benefits ◽  
Treatment Result ◽  
Bast Fiber ◽  
Fiber Properties ◽  
Yarn Thickness ◽  
Jute Yarn

The versatile bast fiber jute has environmental benefits compared to glass fibers. However, for jute to be used in a composite, the fiber properties need to be altered. This study aims to improve the mechanical properties of jute yarn to make it more suitable for technical applications as a composite. To alter its mechanical properties, jute yarn was immersed in water during microwave treatment. The time and power of the microwave settings differed between runs. Two states of the yarn were tested: fastened and un-fastened. Tensile testing was used at the yarn and fiber level, followed by Fourier-transform infrared spectroscopy (FTIR) and microscopy. The treatment result demonstrated the ability to increase the elongation of the jute yarn by 70%. The tenacity was also increased by 34% in the fastened state and 20% in the un-fastened state. FTIR showed that no change in the molecular structure occurred. The treatments resulted in a change of yarn thickness depending on the state of the yarn. The results indicate that microwave treatment can be used to make jute more suitable for technical applications depending on the microwave treatment parameters.

Statistical analysis of creep behavior in thermoset and thermoplastic composites reinforced with carbon and glass fibers

2020 ◽  
pp. 030932472097663
Author(s):  
Francisco Maciel Monticeli ◽  
Ana Karoline dos Reis ◽  
Roberta Motta Neves ◽  
Luis Felipe de Paula Santos ◽  
Edson Cocchieri Botelho ◽  
...  
Keyword(s):  
Creep Behavior ◽  
Glass Fibers ◽  
Laminated Composite ◽  
Analytical Models ◽  
Thermoplastic Composites ◽  
Temperature Dependent ◽  
Creep Tests ◽  
Thermoset Composites ◽  
Strain Behavior ◽  
Sensitivity Range

The thermoplastic and thermoset laminates reinforced with different fibers generate variations in the laminated composite mechanical behavior. This work aims to analyze thermoplastic and thermoset composites creep behavior with a reduced number of experiments, applying curve-fitting analytical models (Weibull and Findley) and statistical approach (ANOVA, F-test, and SRM) in order to describe creep behavior. Creep tests were carried out using a design of experiments to define parameter levels, aiming to reduce the number of the experiments, keeping reliability relevance. The temperature shows a stronger influence of creep deformation compared with the use of distinct materials. Thermoplastic matrices seem to be more sensitive to deformation, decreasing the reinforcement contribution. On the other hand, the creep resistance of the thermoset matrix conducts a significant contribution of strain behavior for the reinforcement used. The Findley model showed a temperature-dependent response. While, the Weibull-based model exhibits temperature and material-dependence, ensuring a greater sensitivity range of the parameters applied, an essential factor for a more realistic method description.

scholarly journals An Eye-Safe, SBS-Free Coherent Fiber Laser LIDAR Transmitter with Millijoule Energy and High Average Power

Photonics ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 15
Author(s):  
Mehmetcan Akbulut ◽  
Leonid Kotov ◽  
Kort Wiersma ◽  
Jie Zong ◽  
Maohe Li ◽  
...  
Keyword(s):  
Fiber Laser ◽  
Repetition Rate ◽  
Peak Power ◽  
Figure Of Merit ◽  
Current System ◽  
Glass Fibers ◽  
Average Power ◽  
High Gain ◽  
Short Length ◽  
High Average Power

We report on an eye-safe, transform-limited, millijoule energy, and high average power fiber laser. The high gain and short length of the NP phosphate-glass fibers enable the SBS-free operation with kW level peak power. The output energy is up to 1.3 mJ, and the average power is up to 23 W at an 18 kHz repetition rate with 600 ns pulses (peak power > 2.1 kW). The PER is ≈16 dB and the M2 of the beam is 1.33 × 1.18. The coherent LIDAR Figure Of Merit (FOM) is 174 mJ*sqrt(Hz), which to our knowledge is the highest reported for a fiber laser. We also report 0.75 mJ energy and >3.7 kW peak power with down to 200 ns pulses and up to 1.21 mJ energy with a 3–5 kHz repetition rate operation of the current system.

scholarly journals The Mechanical Properties and Damage Evolution of UHPC Reinforced with Glass Fibers and High-Performance Polypropylene Fibers

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2455
Author(s):  
Jiayuan He ◽  
Weizhen Chen ◽  
Boshan Zhang ◽  
Jiangjiang Yu ◽  
Hang Liu
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Damage Evolution ◽  
High Performance ◽  
High Performance Concrete ◽  
Glass Fibers ◽  
Ultra High Performance Concrete ◽  
Concrete Damaged Plasticity ◽  
The Difference ◽  
Experimental Values

Due to the sharp and corrosion-prone features of steel fibers, there is a demand for ultra-high-performance concrete (UHPC) reinforced with nonmetallic fibers. In this paper, glass fiber (GF) and the high-performance polypropylene (HPP) fiber were selected to prepare UHPC, and the effects of different fibers on the compressive, tensile and bending properties of UHPC were investigated, experimentally and numerically. Then, the damage evolution of UHPC was further studied numerically, adopting the concrete damaged plasticity (CDP) model. The difference between the simulation values and experimental values was within 5.0%, verifying the reliability of the numerical model. The results indicate that 2.0% fiber content in UHPC provides better mechanical properties. In addition, the glass fiber was more significant in strengthening the effect. Compared with HPP-UHPC, the compressive, tensile and flexural strength of GF-UHPC increased by about 20%, 30% and 40%, respectively. However, the flexural toughness indexes I5, I10 and I20 of HPP-UHPC were about 1.2, 2.0 and 3.8 times those of GF-UHPC, respectively, showing that the toughening effect of the HPP fiber is better.

scholarly journals Graphene Deposition on Glass Fibers by Triboelectrification

2021 ◽  
Vol 11 (7) ◽  
pp. 3123
Author(s):  
Haroon Mahmood ◽  
Laura Simonini ◽  
Andrea Dorigato ◽  
Alessandro Pegoretti
Keyword(s):  
Graphene Oxide ◽  
Interfacial Shear Strength ◽  
Glass Fibers ◽  
Deposition Process ◽  
Solution Concentration ◽  
Dip Coating ◽  
Slight Improvement ◽  
Reduced Graphene ◽  
Fiber Matrix ◽  
Positively Charged

In this work, a novel nanomaterial deposition technique involving the triboelectrification (TE) of glass fibers (GF) to create attractive charges on their surface was investigated. Through TE, continuous GF were positively charged thus, attracting negatively charged graphene oxide (GO) nanoparticles dispersed in a solution. The electrical charges on the glass fibers surface increased with the intensity of the TE process. The deposited GO coating was then chemically treated to obtain reduced graphene oxide (rGO) on the surface of GFs. The amount of coating obtained increased with the GO solution concentration used during the deposition process, as revealed by FESEM analysis. However, the same increment could not be noticed as a function of the intensity of the process. Both uncoated and coated GF were used to obtain single fiber microcomposites by using a bicomponent epoxy matrix. The fiber/matrix interfacial shear strength was evaluated through micro debonding tests, which revealed an increment of fiber/matrix adhesion up to 45% for rGO coated GF in comparison to the uncoated ones. A slight improvement in the electrical conductivity of rGO coated fibers through TE compared to conventional dip coating was also observed in terms of volumetric resistivity by a four-point probe setup.

Sign in / Sign up

Export Citation Format

Share Document