scholarly journals Effect of Absorption and Desorption of Hydrogen in Ti and Ti Alloys

10.5772/64921 ◽  
2017 ◽  
Author(s):  
Alejandra López-Suárez
Keyword(s):  
Ti Alloys

Direct Observation of the Diffusionless β → β + ω Transformation in Titanium Alloys

1971 ◽  
Vol 29 ◽  
pp. 122-123
Author(s):  
N. E. Paton ◽  
D. de Fontaine ◽  
J. C. Williams
Keyword(s):  
Electron Microscope ◽  
Titanium Alloys ◽  
Direct Observation ◽  
Dark Field ◽  
X Ray Diffraction ◽  
Resistivity Measurements ◽  
Selected Area Electron Diffraction ◽  
Ti Alloys ◽  
Thin Foils ◽  
Field Device

The electron microscope has been used to study the diffusionless β → β + ω transformation occurring in certain titanium alloys at low temperatures. Evidence for such a transformation was obtained by Cometto et al by means of x-ray diffraction and resistivity measurements on a Ti-Nb alloy. The present work shows that this type of transformation can occur in several Ti alloys of suitable composition, and some of the details of the transformation are elucidated by means of direct observation in the electron microscope.Thin foils were examined in a Philips EM-300 electron microscope equipped with a uniaxial tilt, liquid nitrogen cooled, cold stage and a high resolution dark field device. Selected area electron diffraction was used to identify the phases present and the ω-phase was imaged in dark field by using a (101)ω reflection. Alloys were water quenched from 950°C, thinned, and mounted between copper grids to minimize temperature gradients in the foil.

AN ATOM-PROBE STUDY OF Fe-Ti ALLOYS

1984 ◽  
Vol 45 (C9) ◽  
pp. C9-417-C9-422
Author(s):  
A. Jimbo ◽  
T. Hashizume ◽  
T. Sakurai ◽  
K. Al-Saleh ◽  
H. W. Pickering
Keyword(s):  
Atom Probe ◽  
Ti Alloys

MAGNETIC PROPERTIES OF AMORPHOUS Fe-Ti ALLOYS PRODUCED BY FACING TARGET TYPE SPUTTERING

1988 ◽  
Vol 49 (C8) ◽  
pp. C8-1275-C8-1276
Author(s):  
K. Sumiyama ◽  
H. Yasuda ◽  
Y. Nakamura
Keyword(s):  
Magnetic Properties ◽  
Target Type ◽  
Ti Alloys

Pitting Corrosion of Biomedical Titanium and Titanium Alloys: A Brief Review

2020 ◽  
Vol 16 ◽  
Author(s):  
Yu-Wei Cui ◽  
Liang-Yu Chen ◽  
Xin-Xin Liu
Keyword(s):  
Corrosion Resistance ◽  
Pitting Corrosion ◽  
Potential Temperature ◽  
Growth Stages ◽  
Factors Affecting ◽  
Ti Alloys ◽  
Pitting Corrosion Resistance ◽  
Superior Mechanical Properties ◽  
Good Biocompatibility ◽  
Main Factors

Abstract:: Thanks to their excellent corrosion resistance, superior mechanical properties and good biocompatibility, titanium (Ti) and Ti alloys are extensively applied in biomedical fields. Pitting corrosion is a critical consideration for the reliability of Ti and Ti alloys used in the human body. Therefore, this article focuses on the pitting corrosion of Ti and Ti alloys, which introduces the growth stages of pitting corrosion and its main influencing factors. Three stages, i.e. (1) breakdown of passive film, (1) metastable pitting, and (3) propagation of pitting, are roughly divided to introduce the pitting corrosion. As reviewed, corrosive environment, applied potential, temperature and alloy compositions are the main factors affecting the pitting corrosion of Ti and Ti alloys. Moreover, the pitting corrosion of different types Ti alloys are also reviewed to correlate the types of Ti alloys and the main factors of pitting corrosion. Roughly speaking, β-type Ti alloys have the best pitting corrosion resistance among the three types of Ti alloys.

Investigating formation, structure and properties of coatings based on Cu–Ti alloys

2019 ◽  
pp. 175-181
Author(s):  
A. I. Kovtunov ◽  
T. V. Semistenova ◽  
A. M. Ostryanko
Keyword(s):  
Wear Resistance ◽  
Heat Resistance ◽  
Chemical Compound ◽  
Wear Resistant Coating ◽  
Titanium Coating ◽  
Structure And Properties ◽  
Properties Of Coatings ◽  
Wear Resistant ◽  
Ti Alloys ◽  
Titanium Wire

The paper offers technology of argon-arc surfacing with titanium wire in order to form heat and wear resistant coating based on the titanium cuprides. The influence of surfacing modes on the chemical compound and structure of formed coatings is determined. The wear resistance and heat resistance at 600°C and 800°C were researched for copper–titanium coating with 8–63% titanium.

Development of the Snoek Anelastic Relaxation Correlated with Oxygen in β-Ti Alloys

2019 ◽  
Vol 298 ◽  
pp. 59-63 ◽  
Author(s):  
Zheng Cun Zhou ◽  
J. Du ◽  
S.Y. Gu ◽  
Y.J. Yan
Keyword(s):  
Internal Friction ◽  
Physical And Mechanical Properties ◽  
Peak Height ◽  
Relaxation Peak ◽  
Interstitial Oxygen ◽  
Internal Friction Peak ◽  
Β Phase ◽  
Ti Alloys ◽  
Interstitial Atoms ◽  
The Stability

The β-Ti alloys exhibit excellent shape memory effect and superelastic properties. The interstitial atoms in the alloys have important effect on their physical and mechanical properties. For the interstitial atoms, the internal friction technique can be used to detect their distributions and status in the alloys. The anelastic relaxation in β-Ti alloys is discussed in this paper. β-Ti alloys possesses bcc (body center body) structure. The oxygen (O) atoms in in the alloys is difficult to be removed. The O atoms located at the octahedral sites in the alloys will produce relaxation under cycle stress. In addition, the interaction between the interstitial atoms and substitute atoms, e.g., Nb-O,Ti-O can also produce relaxation. Therefore, the observed relaxational internal friction peak during the measuring of internal friction is widened. The widened multiple relaxation peak can be revolved into Debye,s elemental peaks in Ti-based alloys. The relaxation peak is associated with oxygen movements in lattices under the application of cycle stress and the interactions of oxygen-substitute atoms in metastable β phase (βM) phase for the water-cooled specimens and in the stable β (βS) phase for the as-sintered specimens. The damping peak height is not only associated with the interstitial oxygen, but also the stability and number of βM in the alloys.

scholarly journals Constitution, oxidation and creep of eutectic and eutectoid Mo-Si-Ti alloys

2019 ◽  
Vol 104 ◽  
pp. 133-142 ◽  
Author(s):  
Daniel Schliephake ◽  
Alexander Kauffmann ◽  
Xiangna Cong ◽  
Camelia Gombola ◽  
Maria Azim ◽  
...  
Keyword(s):  
Ti Alloys
Sign in / Sign up

Export Citation Format

Share Document