scholarly journals Volatile Precursors for Films Deposition: Vapor Pressure, Structure and Thermodynamics

10.5772/13356 ◽  
2011 ◽  
Author(s):  
Igor K. ◽  
Tamara V. ◽  
Vladimir R.
Keyword(s):  
Vapor Pressure ◽  
Volatile Precursors

Benzylamine Tartrate as an Organic Glass Substrate for Carbon Films by Evaporation

1970 ◽  
Vol 28 ◽  
pp. 484-485
Author(s):  
A. C. Faberge
Keyword(s):  
Vapor Pressure ◽  
Viscous Liquid ◽  
Glass Substrate ◽  
Room Temperature ◽  
Carbon Film ◽  
Carbon Films ◽  
Organic Glass ◽  
Spectroscopic Examination ◽  
Polymeric Substrates

Benzylamine tartrate (m.p. 63°C) seems to be a better and more convenient substrate for making carbon films than any of those previously proposed. Using it in the manner described, it is easy consistently to make batches of specimen grids as open as 200 mesh with no broken squares, and without individual handling of the grids. Benzylamine tartrate (hereafter called B.T.) is a viscous liquid when molten, which sets to a glass. Unlike polymeric substrates it does not swell before dissolving; such swelling of the substrate seems to be a principal cause of breakage of carbon film. Mass spectroscopic examination indicates a vapor pressure less than 10−9 Torr at room temperature.

Hydration Chamber for Jeolco 200 Kv Microscope

1970 ◽  
Vol 28 ◽  
pp. 542-543
Author(s):  
V. R. Matricardi ◽  
G. G. Hausner ◽  
D. F. Parsons
Keyword(s):  
Electron Microscope ◽  
Water Vapor ◽  
Vapor Pressure ◽  
Pressure Gradient ◽  
Room Temperature ◽  
List Type ◽  
Type Number ◽  
Equilibrium Vapor Pressure

In order to observe room temperature hydrated specimens in an electron microscope, the following conditions should be satisfied: The specimen should be surrounded by water vapor as close as possible to the equilibrium vapor pressure corresponding to the temperature of the specimen.The specimen grid should be inserted, focused and photo graphed in the shortest possible time in order to minimize dehydration.The full area of the specimen grid should be visible in order to minimize the number of changes of specimen required.There should be no pressure gradient across the grid so that specimens can be straddled across holes.Leakage of water vapor to the column should be minimized.

Properties of Refrigerants from Cubic Equations of State

2008 ◽  
Vol 59 (5) ◽  
Author(s):  
Viorel Feroiu ◽  
Dan Geana ◽  
Catinca Secuianu
Keyword(s):  
Experimental Data ◽  
Vapor Pressure ◽  
Equations Of State ◽  
Ternary Mixtures ◽  
Volumetric Properties ◽  
Mixing Rules ◽  
Saturation Curve ◽  
Equilibrium Thermodynamic ◽  
Liquid Equilibrium ◽  
Binary And Ternary Mixtures

Vapour � liquid equilibrium, thermodynamic and volumetric properties were predicted for three pure hydrofluorocarbons: difluoromethane (R32), pentafluoroethane (R125) and 1,1,1,2 � tetrafluoroethane (R134a) as well as for binary and ternary mixtures of these refrigerants. Three cubic equations of state GEOS3C, SRK (Soave � Redlich � Kwong) and PR (Peng � Robinson) were used. A wide comparison with literature experimental data was made. For the refrigerant mixtures, classical van der Waals mixing rules without interaction parameters were used. The GEOS3C equation, with three parameters estimated by matching several points on the saturation curve (vapor pressure and corresponding liquid volumes), compares favorably to other equations in literature, being simple enough for applications.

Vapor Pressure of GD

2007 ◽  
Author(s):  
Alex Balboa ◽  
James H. Buchanan ◽  
Leonard C. Buettner ◽  
Tara Sewell ◽  
David E. Tevault
Keyword(s):  
Vapor Pressure
Sign in / Sign up

Export Citation Format

Share Document