scholarly journals Study of Mechanical Properties of Alkali Treated SZF/SF/VE Hybrid Composites under Wet Condition

2021 ◽  
pp. X
Author(s):  
Athijayamani AYYANAR ◽  
Ramkumar GP ◽  
Alavudeen AZIZ BATCHA ◽  
Thiruchitrambalam MANI
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Hybrid Composite ◽  
Vinyl Ester ◽  
Hybrid Composites ◽  
Fiber Composites ◽  
Hybrid Fiber ◽  
Wet Condition ◽  
Water Absorption Test ◽  
Sisal Fibers

Mechanical properties of vinyl ester hybrid composites reinforced with alkali treated Smilax zeylanica and sisal fibers were studied at wet condition in the present communication. Hybrid composites were fabricated by using a simple hand lay up technique based on three different fiber loading of 25, 35, and 45 wt.% with alkali treated fibers. Hybrid composite specimens were then subjected to the water absorption test to observe the behaviours of composite specimens at wet condition under mechanical loads such as tensile, flexural and impact. Water absorption test was carried out in two ways at distilled water environment at room temperature. First way test was conducted for 10 days to observe the percentage of water particle absorption of hybrid composites. Second way test was performed for 5 days to determine the mechanical properties of hybrid composites at wet condition to observe its durability when they are used in outdoor applications. Mechanical properties of hybrid composite specimens at wet conditions were compared with the dry composite specimens. Experimental results showed that the percentage of the water particle absorption in the alkali treated hybrid fiber composites is lower as compared to the untreated hybrid fiber composites. Mechanical properties of alkali treated hybrid fiber composites at wet condition are slightly reduced as compared to the treated hybrid fiber composite at dry condition. As a result, it is observed that the resistance for the penetration of the water particles is higher for the alkali treated smilax zeylanica and sisal fibers reinforced vinyl ester hybrid composites. The fracture surfaces of the hybrid composite specimens were examined by scanning electron microscope to understand the effects of water absorption on the mechanical properties.

scholarly journals Investigations on the Mechanical Properties of Glass Fiber/Sisal Fiber/Chitosan Reinforced Hybrid Polymer Sandwich Composite Scaffolds for Bone Fracture Fixation Applications

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1501 ◽  
Author(s):  
Soundhar Arumugam ◽  
Jayakrishna Kandasamy ◽  
Ain Umaira Md Shah ◽  
Mohamed Thariq Hameed Sultan ◽  
Syafiqah Nur Azrie Safri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Glass Fiber ◽  
Bone Fracture ◽  
Hybrid Composite ◽  
Bone Structure ◽  
Hybrid Composites ◽  
Sisal Fiber ◽  
Composite Scaffolds ◽  
Study Results

This study aims to explore the mechanical properties of hybrid glass fiber (GF)/sisal fiber (SF)/chitosan (CTS) composite material for orthopedic long bone plate applications. The GF/SF/CTS hybrid composite possesses a unique sandwich structure and comprises GF/CTS/epoxy as the external layers and SF/CTS/epoxy as the inner layers. The composite plate resembles the human bone structure (spongy internal cancellous matrix and rigid external cortical). The mechanical properties of the prepared hybrid sandwich composites samples were evaluated using tensile, flexural, micro hardness, and compression tests. The scanning electron microscopic (SEM) images were studied to analyze the failure mechanism of these composite samples. Besides, contact angle (CA) and water absorption tests were conducted using the sessile drop method to examine the wettability properties of the SF/CTS/epoxy and GF/SF/CTS/epoxy composites. Additionally, the porosity of the GF/SF/CTS composite scaffold samples were determined by using the ethanol infiltration method. The mechanical test results show that the GF/SF/CTS hybrid composites exhibit the bending strength of 343 MPa, ultimate tensile strength of 146 MPa, and compressive strength of 380 MPa with higher Young’s modulus in the bending tests (21.56 GPa) compared to the tensile (6646 MPa) and compressive modulus (2046 MPa). Wettability study results reveal that the GF/SF/CTS composite scaffolds were hydrophobic (CA = 92.41° ± 1.71°) with less water absorption of 3.436% compared to the SF/CTS composites (6.953%). The SF/CTS composites show a hydrophilic character (CA = 54.28° ± 3.06°). The experimental tests prove that the GF/SF/CTS hybrid composite can be used for orthopedic bone fracture plate applications in future.

scholarly journals Effects of water absorption on the mechanical properties of hybrid natural fibre/phenol formaldehyde composites

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sekar Sanjeevi ◽  
Vigneshwaran Shanmugam ◽  
Suresh Kumar ◽  
Velmurugan Ganesan ◽  
Gabriel Sas ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Water Absorption ◽  
Hybrid Composites ◽  
Phenol Formaldehyde ◽  
Natural Fibre ◽  
The Other ◽  
Fibre Reinforcement ◽  
Dry Conditions

AbstractThis investigation is carried out to understand the effects of water absorption on the mechanical properties of hybrid phenol formaldehyde (PF) composite fabricated with Areca Fine Fibres (AFFs) and Calotropis Gigantea Fibre (CGF). Hybrid CGF/AFF/PF composites were manufactured using the hand layup technique at varying weight percentages of fibre reinforcement (25, 35 and 45%). Hybrid composite having 35 wt.% showed better mechanical properties (tensile strength ca. 59 MPa, flexural strength ca. 73 MPa and impact strength 1.43 kJ/m2) under wet and dry conditions as compared to the other hybrid composites. In general, the inclusion of the fibres enhanced the mechanical properties of neat PF. Increase in the fibre content increased the water absorption, however, after 120 h of immersion, all the composites attained an equilibrium state.

FRP-Nanoclay Hybrid Composites: A Review

2017 ◽  
Vol 904 ◽  
pp. 146-150 ◽  
Author(s):  
Manjunath Shettar ◽  
U. Achutha Kini ◽  
Sathya Shankar Sharma ◽  
Pavan Hiremath
Keyword(s):  
Mechanical Properties ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Basic Structure ◽  
Structure Property ◽  
Key Factors ◽  
Characterization Techniques

The review is on aimed an insight source for FRP-Nanoclay hybrid composite (nanocomposite) research, which includes basic structure/property, preparation & characterization techniques, mechanical properties and applications of hybrid composites. Key factors are discussed, which are influencing the mechanical properties of nanocomposite with nanoclay addition. Conclusions are also drawn based on the research of nanocomposites and improvement in mechanical properties.

scholarly journals Development of Environmentally Friendly Brake Lining Material

2019 ◽  
Vol 120 ◽  
pp. 03005
Author(s):  
I K. Adi Atmika ◽  
IDG. Ary Subagia ◽  
IW. Surata ◽  
IN. Sutantra
Keyword(s):  
Wear Rate ◽  
Water Absorption ◽  
Hybrid Composite ◽  
Environmentally Friendly ◽  
Fixed Temperature ◽  
Brake Pads ◽  
Environment And Health ◽  
Pin On Disc ◽  
Water Absorption Test ◽  
Brake Lining

Materials commonly used as brake pads are asbestos and alloys, but this material is very dangerous to the environment and health. This research was developed to answer these problems, namely to look for alternative brake pads that have good mechanical and structural properties and are environmentally friendly. Brake lining pads material is made from hybrid composite reinforced basalt, shells, alumina and bound using phenolic resin polymer (PR-51510i). This brake pads material is produced through a sintering process with an emphasis of 2000 kg for 30 minutes at a fixed temperature of 160°C. This hybrid composite is made in as many as five variations, each of which is tested for wear resistance using a pin on disc test based on ASTM G 99-95a standards, while destilled water absorption test was based on ASTM D 570-98. The greatest wear rate is 0.000090 g/cm, which is still lower than wear rate of asbestos brake pad materials, and the highest destilled water absorption of the brake pads specimens obtained was 0.041558 still lower than the destilled water absorption of asbestos brake pads.

scholarly journals Thermal Action on Normal and High Strength Cement Mortars

2020 ◽  
Vol 10 (18) ◽  
pp. 6455
Author(s):  
Marianela Ripani ◽  
Hernán Xargay ◽  
Ignacio Iriarte ◽  
Kevin Bernardo ◽  
Antonio Caggiano ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Peak Load ◽  
Physical And Mechanical Properties ◽  
Thermal Action ◽  
High Strength ◽  
Strength Loss ◽  
Brittle Behavior ◽  
Cement Mortars ◽  
Water Absorption Test

High temperature effect on cement-based composites, such as concrete or mortars, represents one of the most important damaging process that may drastically affect the mechanical and durability characteristics of structures. In this paper, the results of an experimental campaign on cement mortars submitted to high temperatures are reported and discussed. Particularly, two mixtures (i.e., Normal (MNS) and High Strength Mortar (MHS)) having different water-to-binder ratios were designed and evaluated in order to investigate the incidence of both the mortar composition and the effects of thermal treatments on their physical and mechanical properties. Mortar specimens were thermally treated in an electrical furnace, being submitted to the action of temperatures ranging from 100 to 600 °C. After that and for each mortar quality and considered temperature, including the room temperature case of 20 °C, water absorption was measured by following a capillary water absorption test. Furthermore, uniaxial compression, splitting tensile and three-points bending tests were performed under residual conditions. A comparative analysis of the progressive damage caused by temperature on physical and mechanical properties of the considered mortars types is presented. On one hand, increasing temperatures produced increasing water absorption coefficients, evidencing the effect of thermal damages which may cause an increase in the mortars accessible porosity. However, under these circumstances, the internal porosity structure of lower w/b ratio mixtures results much more thermally-damaged than those of MNS. On the other hand, strengths suffered a progressive degradation due to temperature rises. While at low to medium temperatures, strength loss resulted similar for both mortar types, at higher temperature, MNS presented a relatively greater strength loss than that of MHS. The action of temperature also caused in all cases a decrease of Young’s Modulus and an increase in the strain corresponding to peak load. However, MHS showed a much more brittle behavior in comparison with that of MNS, for all temperature cases. Finally, the obtained results demonstrated that mortar quality cannot be neglected when the action of temperature is considered, being the final material performance dependent on the physical properties which, in turn, mainly depend on the mixture proportioning.

Sign in / Sign up

Export Citation Format

Share Document