scholarly journals Investigations on the Mechanical Properties of Glass Fiber/Sisal Fiber/Chitosan Reinforced Hybrid Polymer Sandwich Composite Scaffolds for Bone Fracture Fixation Applications

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1501 ◽  
Author(s):  
Soundhar Arumugam ◽  
Jayakrishna Kandasamy ◽  
Ain Umaira Md Shah ◽  
Mohamed Thariq Hameed Sultan ◽  
Syafiqah Nur Azrie Safri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Glass Fiber ◽  
Bone Fracture ◽  
Hybrid Composite ◽  
Bone Structure ◽  
Hybrid Composites ◽  
Sisal Fiber ◽  
Composite Scaffolds ◽  
Study Results

This study aims to explore the mechanical properties of hybrid glass fiber (GF)/sisal fiber (SF)/chitosan (CTS) composite material for orthopedic long bone plate applications. The GF/SF/CTS hybrid composite possesses a unique sandwich structure and comprises GF/CTS/epoxy as the external layers and SF/CTS/epoxy as the inner layers. The composite plate resembles the human bone structure (spongy internal cancellous matrix and rigid external cortical). The mechanical properties of the prepared hybrid sandwich composites samples were evaluated using tensile, flexural, micro hardness, and compression tests. The scanning electron microscopic (SEM) images were studied to analyze the failure mechanism of these composite samples. Besides, contact angle (CA) and water absorption tests were conducted using the sessile drop method to examine the wettability properties of the SF/CTS/epoxy and GF/SF/CTS/epoxy composites. Additionally, the porosity of the GF/SF/CTS composite scaffold samples were determined by using the ethanol infiltration method. The mechanical test results show that the GF/SF/CTS hybrid composites exhibit the bending strength of 343 MPa, ultimate tensile strength of 146 MPa, and compressive strength of 380 MPa with higher Young’s modulus in the bending tests (21.56 GPa) compared to the tensile (6646 MPa) and compressive modulus (2046 MPa). Wettability study results reveal that the GF/SF/CTS composite scaffolds were hydrophobic (CA = 92.41° ± 1.71°) with less water absorption of 3.436% compared to the SF/CTS composites (6.953%). The SF/CTS composites show a hydrophilic character (CA = 54.28° ± 3.06°). The experimental tests prove that the GF/SF/CTS hybrid composite can be used for orthopedic bone fracture plate applications in future.

scholarly journals Optimization of Sisal Fiber, Glass Fiber and Alumina- Based Hybrid Composite for Flexural Strength Using Taguchi Technique

2021 ◽  
Vol 9 (10) ◽  
pp. 474-483
Author(s):  
Veenapani R
Keyword(s):  
Flexural Strength ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
The Other ◽  
Synthetic Fiber ◽  
Sisal Fiber ◽  
Taguchi Technique ◽  
Fiber Glass ◽  
Main Effect

Abstract: In the current study, flexural strength of combination of natural and synthetic fiber with particle filled hybrid composites have been studied. The flexural strength of the hybrid composite mainly depends on the proportion of the sisal fiber weight, glass fiber weight and alumina weight. Taguchi technique has been applied to find the optimized parameters of the developed hybrid composites. Results were obtained for the L9 orthogonal combination from experimentation. The results were analysed with the help of Signal/Noise (S/N) Ratio, Main effect plot and Analysis of variance (ANOVA) using Mini Tab 19. Regression equation are developed for all three reinforcements separately. From the current study it was observed that the flexural strength of the hybrid composite mainly depends on the sisal fiber precent that the other two reinforcements. Based on the experimental observations the maximum ultimate flexural strength was found to be 145.97 MPa for optimised input parameters as 20% of sisal fiber, 20% of glass fiber and 2% of alumina. Keywords: Taguchi technique, ANOVA, Flexural strength, Sisal fiber, Glass Fiber, Alumina

Effect of Cenosphere Addition on Mechanical Properties of Bamboo and E-Glass Fiber Reinforced Epoxy Hybrid Composites

2020 ◽  
Vol 12 (4) ◽  
Author(s):  
B.K. Venkatesh ◽  
R. Saravanan
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Power Plants ◽  
Hybrid Composites ◽  
Thermal Power ◽  
Element Analysis ◽  
Weight Percentage ◽  
Experimental Values

Cenosphere is a ceramic-rich industrial waste produced during burning of coal in the thermal power plants. This study deals with the effect of cenosphere as particulate filler on mechanical behaviour of woven bamboo-glass hybrid composites. The hybrid composite consists of bamboo and E-glass fiber as reinforcement and epoxy as matrix. Cenosphere of different weight percentage (0.5, 1, 1.5 and 2 %) was added to the hybrid composite. The samples were tested as per ASTM standards for their mechanical properties to establish the effect of filler content. It is found that the mechanical properties are significantly influenced by addition of waste ceramic filler cenosphere up to 2 wt.% and increases the tensile, flexural and inter-laminar shear strength in comparison to unfilled composite. Finite element analysis is also done using Midas NFX and the simulation results are compared with experimental results. From the results, it has been found that the experimental values obtained from tensile testing and flexure testing nearly matches with finite element values.

scholarly journals Study of Mechanical Properties of Alkali Treated SZF/SF/VE Hybrid Composites under Wet Condition

2021 ◽  
pp. X
Author(s):  
Athijayamani AYYANAR ◽  
Ramkumar GP ◽  
Alavudeen AZIZ BATCHA ◽  
Thiruchitrambalam MANI
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Hybrid Composite ◽  
Vinyl Ester ◽  
Hybrid Composites ◽  
Fiber Composites ◽  
Hybrid Fiber ◽  
Wet Condition ◽  
Water Absorption Test ◽  
Sisal Fibers

Mechanical properties of vinyl ester hybrid composites reinforced with alkali treated Smilax zeylanica and sisal fibers were studied at wet condition in the present communication. Hybrid composites were fabricated by using a simple hand lay up technique based on three different fiber loading of 25, 35, and 45 wt.% with alkali treated fibers. Hybrid composite specimens were then subjected to the water absorption test to observe the behaviours of composite specimens at wet condition under mechanical loads such as tensile, flexural and impact. Water absorption test was carried out in two ways at distilled water environment at room temperature. First way test was conducted for 10 days to observe the percentage of water particle absorption of hybrid composites. Second way test was performed for 5 days to determine the mechanical properties of hybrid composites at wet condition to observe its durability when they are used in outdoor applications. Mechanical properties of hybrid composite specimens at wet conditions were compared with the dry composite specimens. Experimental results showed that the percentage of the water particle absorption in the alkali treated hybrid fiber composites is lower as compared to the untreated hybrid fiber composites. Mechanical properties of alkali treated hybrid fiber composites at wet condition are slightly reduced as compared to the treated hybrid fiber composite at dry condition. As a result, it is observed that the resistance for the penetration of the water particles is higher for the alkali treated smilax zeylanica and sisal fibers reinforced vinyl ester hybrid composites. The fracture surfaces of the hybrid composite specimens were examined by scanning electron microscope to understand the effects of water absorption on the mechanical properties.

scholarly journals Experimental Study on Fabrication and Comparison of Mechanical Properties of Plain Weave Copper Mesh Embedded Hybrid Composite with E-Glass Fiber Reinforced Epoxy GFRP Composite

2021 ◽  
Vol 1 (02) ◽  
Author(s):  
Ravindra Chopra
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Layer By Layer ◽  
Fiber Reinforced ◽  
Plain Weave ◽  
Plastic Composite ◽  
Glass Fiber Reinforced ◽  
Gfrp Composite

The present research is conducted on GFRP (Glass-Fiber Reinforced Plastic) composite which is fiberglass reinforced with epoxy matrix and find its mechanical properties that can be compared with other hybrid composite which include plain weave copper strips mesh in between the layers of fiberglass in GFRP composite. Both type of composites are made using hand layup technique i.e., placing of chopped fiberglass sheet and then epoxy resin layer by layer, after filling of epoxy and fiberglass at 20% fiber loading which is measured by digital scale, then a pressure is also applied on this sandwich. After 24 hours it is ready to be demolded and after 48 hrs. samples was cuts as per ASTM standards then testing was done on both GFRP and Hybrid composites to find their Mechanical & Physical Properties. Results shows improvement as we introduce plain weave copper strips mesh in between the GFRP laminate to make it hybrid.

scholarly journals Optimization for Tensile Strength of Sisal Fiber, Glass Fiber and Alumina- Based Hybrid Composite using Taguchi Technique

2021 ◽  
pp. 299-308
Author(s):  
Veenapani R ◽  
B M Rajaprakash ◽  
Akash M
Keyword(s):  
Tensile Strength ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Sisal Fiber ◽  
Taguchi Technique ◽  
Fiber Glass ◽  
Alumina Particles ◽  
Response Optimization

Natural fibers composite play an important role in making eco-friendly products. The present investigation has been made to find tensile strength of hybrid composites fabricated using optimal composition of sisal fiber, glass fiber and alumina. Multi-response optimization has been carried out. The compositions of reinforcements namely sisal fiber, glass fiber and alumina in hybrid composite were prepared by Hand-layup technique. Sisal fiber of 20 Wt.%, 30 Wt.% and 40 Wt.% are chopped into 10mm length, Glass fiber of 20 Wt.%, 30 Wt.% and 40 Wt.% are 10mm length and alumina particles of 2Wt.%, 3 Wt.% and 4 Wt.% are compositions of reinforcement were chosen according to orthogonal array as Taguchi technique(L9). The results have been verified through confirmatory experiments. Experimentations were carried out with the different composition based on L9 process parameters. Based on the experimental observations the maximum ultimate tensile strength was found to be 37.87 MPa for optimised input parameters as 20% of sisal fiber, 30% of glass fiber and 3% of alumina.

Experimental Testing on Hybrid Composite Materials

2014 ◽  
Vol 592-594 ◽  
pp. 339-343 ◽  
Author(s):  
S. Sathish ◽  
T. Ganapathy ◽  
Thiyagarajan Bhoopathy
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Experimental Testing ◽  
Fiber Composite ◽  
Weight Ratio ◽  
High Strength ◽  
Jute Fiber ◽  
Sisal Fiber

In recent trend, the most used fiber reinforced composite is the glass fiber composite. The glass-fiber composites have high strength and mechanical properties but it is costlier than sisal and jute fiber. Though the availability of the sisal and jute fiber is more, it cannot be used for high strength applications. A high strength-low cost fiber may serve the purpose. This project focuses on the experimental testing of hybrid composite materials. The hybrid composite materials are manufactured using three different fibers - sisal, glass and jute with epoxy resin with weight ratio of fiber to resin as 30:70. Four combinations of composite materials viz., sisal-epoxy, jute-epoxy, sisal-glass-epoxy and sisal-jute-epoxy are manufactured to the ASTM (American Society for Testing and Materials) standards. The specimens are tested for their mechanical properties such as tensile and impact strength in Universal Testing machine. The results are compared with that of the individual properties of the glass fiber, sisal fiber, jute fiber composite and improvements in the strength-weight ratio and mechanical properties are studied.

scholarly journals Comparative Study on Mechanical Properties of Bamboo Strip and Bamboo Strip-glass Fiber Reinforced Hybrid Composites

2020 ◽  
Vol 01 (01) ◽  
pp. 06-10 ◽  
Author(s):  
Mahir Asif ◽  
Kazi Adnan Rahman ◽  
Mohammad Omar Faisal ◽  
Md. Shariful Islam
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
The Other ◽  
Flexural Properties ◽  
Fiber Reinforced ◽  
Fiber Layer ◽  
Glass Fiber Reinforced ◽  
Strip Glass

In this paper, mechanical properties of bamboo strip and bamboo strip-glass fiber reinforced hybrid composite were investigated. Composites were manufactured by using hand lay-up technique and bamboo strips were made from locally available bamboo. Four layers of bamboo strip composite were manufactured and in case of hybrid composite, two layers of glass fiber one at the top and the other at the bottom were used with the aim was to observe the effect of adding glass fiber layer on the mechanical properties of bamboo strip composite. Tensile and flexural properties were studied and it was found that adding the glass fiber layer doesn’t have any significant effect on tensile properties but flexural strength and modulus have increased by 22.49 % and 15.02 % respectively.

Mechanical performance of intraply and inter-intraply hybrid composites based on e-glass and polypropylene unidirectional fibers

2016 ◽  
Vol 51 (3) ◽  
pp. 381-394 ◽  
Author(s):  
MA Attia ◽  
MA Abd El-baky ◽  
AE Alshorbagy
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Mechanical Performance ◽  
Hybrid Composites ◽  
Stacking Sequence ◽  
Unidirectional Fibers ◽  
Interlaminar Shear ◽  
Hybrid Configuration ◽  
Intraply Hybrid Composite

The aims of this study are to design, fabricate and investigate the mechanical properties of new hybrid composite laminates made from polypropylene-glass unidirectional fibers and epoxy matrix. Specimens were fabricated following the hand lay-up technique in intraply and inter-intraply configurations. Results are presented regarding the tensile, flexural, in-plane shear and interlaminar shear behaviors of fabricated composites with particular consideration of the effects of the plies stacking sequence and hybrid configuration. The experimental results reveal that the mechanical properties of polypropylene/epoxy composite can be effectively improved by the incorporation of glass fiber through the formation of either intraply or inter-intraply hybrid composites. With a proper choice of the hybrid configuration and the plies stacking sequence, the fabricated hybrid composites achieved property profiles close to those of homogeneous glass reinforced laminate in terms of specific properties. Resistance of the intraply hybrid composite to tensile and flexural loadings is higher than inter-intraply hybrid composites. On the other hand, the highest in-plane and interlaminar shear strengths are associated with the inter-intraply hybrid composite with glass fiber core. Additionally, an analytical analysis was also introduced to provide a good correlation with the experimental data, which give an insight on the ideal plies stacking sequence to achieve the required properties.

Mechanical properties of plain woven kenaf/glass fiber reinforced polypropylene hybrid composites

2019 ◽  
Vol 61 (11) ◽  
pp. 1095-1100 ◽  
Author(s):  
Sivakumar Dhar Malingam ◽  
Kathiravan Subramaniam ◽  
Ng Lin Feng ◽  
Siti Hajar Sheikh MD Fadzullah ◽  
Sivaraos Subramonian
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Hybrid Composites ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced ◽  
Woven Kenaf
Sign in / Sign up

Export Citation Format

Share Document