scholarly journals Ability of some species of fungi of the Basidiomycetes class to degrade cellulose and lignocellulose substrates

2014 ◽  
Vol 19 (2) ◽  
pp. 323-330
Author(s):  
Zdzisław Tagoński
Keyword(s):  
Beech Wood ◽  
Brown Rot ◽  
White Rot ◽  
White Rot Fungus ◽  
Cellulolytic Enzymes ◽  
Pine Wood ◽  
Wood Meal ◽  
Fomes Fomentarius

Studies were carried-out on the ability of 18 strains of 15 white-rot and brown-rot basidiomycetons fungi to degrade wood components and to synthesize cellulolytic enzymes and laccase. 28,5% lignin and 26,1% carbohydrates of pine wood meal, 46,2% lignin and 67,8% carbohydrates of beech wood meal was degraded after 6 weeks incubation by the white-rot fungus <i>Phanerochate chrysosporium</i>. The highest activity of laccase was obtained in from fungi <i>Coriotus zonatus</i> and <i>Fomes fomentarius</i>.

scholarly journals The Impact of Paraffin-Thermal Modification of Beech Wood on Its Biological, Physical and Mechanical Properties

Forests ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 1102 ◽  
Author(s):  
Ladislav Reinprecht ◽  
Miroslav Repák
Keyword(s):  
Mechanical Properties ◽  
Bending Strength ◽  
Beech Wood ◽  
Physical And Mechanical Properties ◽  
Brown Rot ◽  
European Beech ◽  
White Rot ◽  
White Rot Fungus ◽  
Poria Placenta ◽  
The Impact

The European beech (Fagus sylvatica L.) wood was thermally modified in the presence of paraffin at the temperatures of 190 or 210 °C for 1, 2, 3 or 4 h. A significant increase in its resistance to the brown-rot fungus Poria placenta (by 71.4%–98.4%) and the white-rot fungus Trametes versicolor (by 50.1%–99.5%) was observed as a result of all modification modes. However, an increase in the resistance of beech wood surfaces to the mold Aspergillus niger was achieved only under more severe modification regimes taking 4 h at 190 or 210 °C. Water resistance of paraffin-thermally modified beech wood improved—soaking reduced by 30.2%–35.8% and volume swelling by 26.8%–62.9% after 336 h of exposure in water. On the contrary, its mechanical properties worsened—impact bending strength decreased by 17.8%–48.3% and Brinell hardness by 2.4%–63.9%.

Changes in sorption and electrical properties of wood caused by fungal decay

Holzforschung ◽  
2019 ◽  
Vol 73 (5) ◽  
pp. 445-455 ◽  
Author(s):  
Christian Brischke ◽  
Simon Stricker ◽  
Linda Meyer-Veltrup ◽  
Lukas Emmerich
Keyword(s):  
Beech Wood ◽  
Sorption Isotherms ◽  
Brown Rot ◽  
European Beech ◽  
White Rot ◽  
White Rot Fungus ◽  
Decayed Wood ◽  
Vapor Sorption ◽  
Fungal Decay ◽  
Dynamic Vapor Sorption

Abstract As wet wood is prone to degradation by wood-destroying fungi, the monitoring of the moisture content (MC) of wood can be used to quantify the risk of fungal infestation. Fungal decay alters the sorption and electrical conductivity of wood, and thus the goal of the present study was to measure the electrical resistance (R) of wood after fungal decay as a function of MC. Scots pine sapwood (Pinus sylvestris L.) and European beech wood (Fagus sylvatica L.) were submitted to decay by Coniophora puteana (a brown rot fungus, BR) and Trametes versicolor (a white rot fungus, WR) and the mass loss (ML) due to the fungal metabolism was measured. The sorption isotherms were determined by dynamic vapor sorption (DVS), and comparative gravimetric- and R-based MC measurements were conducted. BR and WR reduced the sorption of wood and lowered its R in the hygroscopic range, where the decay led to an overestimation of wood MC, while wood MC was dramatically underestimated above fiber saturation (FS). Specimens showed an MC well above FS if measured directly after harvesting and an increased R compared to undecayed wood at a given MC. BR-decayed specimens were dried and rewetted, and such specimens showed an elevated R beyond FS. In the case of WR-decayed wood, the R was reduced at a given MC.

The fungal resistance of wood modified with glutaraldehyde

Holzforschung ◽  
2012 ◽  
Vol 66 (2) ◽  
Author(s):  
Zefang Xiao ◽  
Yanjun Xie ◽  
Carsten Mai
Keyword(s):  
Scots Pine ◽  
Beech Wood ◽  
Weight Percent Gain ◽  
Brown Rot ◽  
European Beech ◽  
Soft Rot ◽  
Weight Percent ◽  
Fungal Resistance ◽  
White Rot ◽  
White Rot Fungus

Abstract Scots pine sapwood (Pinus sylvestris L.) and European beech wood (Fagus sylvatica L.) were treated with glutaraldehyde (GA) in aqueous solution in the presence of magnesium chloride as a catalyst to evaluate the durability improvement towards staining and rot fungi. The GA modified specimens were dipped in a spore suspension of the blue stain fungus Aureobasidium pullulans and incubated for 8 weeks. The growth on both pine and beech wood was restrained, when the weight percent gain (WPG) of the specimens was above 7%. Under this condition, GA-modified beech wood did not suffer any mass loss after incubation with the white rot fungus Trametes versicolor. The threshold to prevent decay of beech and pine specimens towards the brown rot fungus Coniophora puteana was at a WPG of only 3%. GA treatment to a WPG over 6% protected the Scots pine stakes from soft rot decay during 32 weeks’ exposure according to ENv 807 (2001).

Decay resistance of wood treated with amino-silicone compounds

Holzforschung ◽  
2008 ◽  
Vol 62 (1) ◽  
pp. 112-118 ◽  
Author(s):  
Oliver Weigenand ◽  
Miha Humar ◽  
Geoffrey Daniel ◽  
Holger Militz ◽  
Carsten Mai
Keyword(s):  
Beech Wood ◽  
White Rot Fungi ◽  
Brown Rot ◽  
Decay Resistance ◽  
Solute Concentration ◽  
White Rot ◽  
White Rot Fungus ◽  
European Standard ◽  
Brown Rot Fungi ◽  
Amino Silicone

AbstractAn amino-silicone (AS; amino-polydimethylsiloxane) micro-emulsion was tested for its suitability to preserve wood against basidiomycetes in a mini-block experiment and in a test according to the European standard (1996) EN 113. Decay resistance was assessed against the white rot fungiTrametes versicolor,Ceriporiopsis subvermispora, andHypoxylon fragiforme, as well as the brown rot fungiConiophora puteana,Antrodia vaillantii,Gloeophyllum trabeumandSerpula lacrymans. Pine sapwood and beech wood were treated with AS emulsions at solute concentration levels of 2%, 5% and 15%. The mini-blocks treated with 15% concentrations of AS resisted decay byT. versicolorandC. puteanaover a long time (12 weeks), while samples treated with low and moderate concentrations underwent considerable mass losses. Accordingly, microscopic studies revealed a high degree of colonisation by the white rot fungus and loss of cell wall integrity (brown rot) in samples treated with 2% AS. At high AS content (15%), no or only initial stages of decay could be observed. In the European standard (1996) test EN 113, the mass loss in all fungal cultures except for the white rot ascomyceteH. fragiformewas below 5%, when the samples were treated with 15% AS. The effect of low and moderate AS concentration on the decay resistance was dependent on the fungal strain. The mode of action of AS treatment against basidiomycete decay is discussed.

Study of the sorption-desorption properties of pine wood at the initial stage of decay by wood-rot fungi 10th EWLP, Stockholm, Sweden, August 25–28, 2008

Holzforschung ◽  
2009 ◽  
Vol 63 (6) ◽  
Author(s):  
Jelena Chirkova ◽  
Ilze Irbe ◽  
Ingeborga Andersone ◽  
Bruno Andersons
Keyword(s):  
Cell Wall ◽  
High Performance ◽  
Control Sample ◽  
Brown Rot ◽  
Hot Water ◽  
White Rot ◽  
White Rot Fungus ◽  
Pine Wood ◽  
Initial Stage ◽  
Treated Sample

Abstract Hot water extraction of pine wood was carried out after 10 days of exposure to brown-rot fungi (Gloeophyllum trabeum, Coniophora puteana and Poria placenta) and a white-rot fungus (Coriolus versicolor). The microstructure of the wood cell wall was analysed by the water vapour sorption method. The content and composition of monosaccharides in the extracts were determined by high performance liquid chromatography. Despite the absence of essential mass losses at the initial stage of the contact with the fungi, slight changes in the cell wall microstructure can be observed, namely, the hydrophobisation and the change in the character of porosity in the region of 1–10 nm pore sizes. After hot water treatment, the mass decreases considerably, i.e., to 25% for the control and brown-rot treated samples and more than 30% for the white-rot treated sample. The sorption-desorption isotherms for the washed control sample and brown-rot samples were not changed practically, but the isotherm was changed clearly in the case of the white-rot treated sample. The microstructure of the white-rot sample changed after hot water washing radically and was accompanied with the formation of wide mesopores in the range of 5–9 nm width.

Effect of ozonation on composting Japanese cedar wood meal

Holzforschung ◽  
2017 ◽  
Vol 71 (11) ◽  
pp. 913-918
Author(s):  
Tomoko Sugimoto ◽  
Shuji Hosoya ◽  
Koichi Yamamoto ◽  
Satoshi Oosawa ◽  
Akihiro Tanaka ◽  
...  
Keyword(s):  
Lignin Degradation ◽  
Japanese Cedar ◽  
Brown Rot ◽  
White Rot ◽  
Wood Meal ◽  
Decay Test

AbstractOzonized Japanese cedar wood meal was evaluated as a feedstock for compost. The composting experiment performed in a 1.8 m3tank during a 4-week period showed that the decomposition of organics was accelerated by the ozonation of wood meal during thermophilic phase. The same is true for decay test of white-rot (WR) fungus. The tested brown-rot (BR) fungus did not show any effect. Accordingly, the lignin degradation by ozone is advantageous for composting. In addition, liberation of ammonia, one source of odor development, was suppressed during the thermophilic phase of composting of ozonized wood meal.

Fungal decay of spruce and beech wood assessed by near-infrared spectroscopy in combination with uni- and multivariate data analysis

Holzforschung ◽  
2007 ◽  
Vol 61 (6) ◽  
pp. 680-687 ◽  
Author(s):  
Karin Fackler ◽  
Manfred Schwanninger ◽  
Cornelia Gradinger ◽  
Ewald Srebotnik ◽  
Barbara Hinterstoisser ◽  
...  
Keyword(s):  
Data Analysis ◽  
Multivariate Data Analysis ◽  
Near Infrared ◽  
Lignin Content ◽  
Beech Wood ◽  
Multivariate Data ◽  
Principal Component ◽  
Brown Rot ◽  
White Rot ◽  
Least Squares Regression

Abstract Wood is colonised and degraded by a variety of micro-organisms, the most efficient ones are wood-rotting basidiomycetes. Microbial decay processes cause damage to wooden constructions, but also have great potential as biotechnological tools to change the properties of wood surfaces and of sound wood. Standard methods to evaluate changes in infected wood, e.g., EN350-1 1994, are time-consuming. Rapid FT-NIR spectroscopic methods are also suitable for this purpose. In this paper, degradation experiments on surfaces of spruce (Picea abies L. Karst) and beech (Fagus silvatica L.) were carried out with white rot basidiomycetes or the ascomycete Hypoxylon fragiforme. Experiments with brown rot or soft rot caused by Chaetomium globosum were also performed. FT-NIR spectra collected from the degraded wood were subjected to principal component analysis. The lignin content and mass loss of the specimens were estimated based on univariate or multivariate data analysis (partial least squares regression).

Iron and calcium translocation from pure gypsum and iron-amended gypsum by two brown rot fungi and a white rot fungus

Holzforschung ◽  
2008 ◽  
Vol 62 (6) ◽  
Author(s):  
Jonathan S. Schilling ◽  
Kaitlyn M. Bissonnette
Keyword(s):  
Building Materials ◽  
Woody Debris ◽  
White Rot Fungi ◽  
Brown Rot ◽  
White Rot ◽  
White Rot Fungus ◽  
Irpex Lacteus ◽  
Brown Rot Fungi ◽  
Ca Oxalate ◽  
Iron And Calcium

AbstractWood-degrading fungi commonly grow in contact with calcium (Ca)-containing building materials and may import Ca and iron (Fe) from soil into forest woody debris. For brown rot fungi, imported Ca2+may neutralize oxalate, while Fe3+may facilitate Fenton-based degradation mechanisms. We previously demonstrated, in two independent trials, that degradation of spruce by wood-degrading fungi was not promoted when Ca or Fe were imported from gypsum or metallic Fe, respectively. Here, we tested pine wood with lower endogenous Ca than the spruce blocks used in prior experiments, and included a pure gypsum treatment and one amended with 1% with FeSO4. Electron microscopy with microanalysis verified that brown rot fungiSerpula himantioidesandGloeophyllum trabeumand the white rot fungusIrpex lacteusgrew on gypsum and produced iron-free Ca-oxalate crystals away from the gypsum surface. Wood cation analysis verified significant Fe import by both brown rot isolates in Fe-containing treatments. Wood degradation was highest in Fe-gypsum-containing treatments for all three fungi, although only wood degraded byI. lacteushad significant Ca import. We suggest that Fe impurities may not exacerbate brown rot, and that both brown and white rot fungi may utilize Ca-containing materials.

Sign in / Sign up

Export Citation Format

Share Document