scholarly journals An Experimental Analysis of the Fluid Dynamic Efficiency of a Production Spark-Ignition Engine during the Intake and Exhaust Phase

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Angelo Algieri
Keyword(s):  
Combustion Engine ◽  
Fluid Dynamic ◽  
Great Influence ◽  
Exhaust System ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Valve Lift ◽  
Induction Phase ◽  
Dynamic Efficiency ◽  
Experimental Characterization

The present work aims at analyzing the fluid dynamic efficiency of a four-stroke spark-ignition engine. Specifically, a production four-cylinder internal combustion engine has been investigated during the intake and exhaust phase. The experimental characterization has been carried out at the steady flow rig adopting the dimensionless flow and discharge coefficients. The analysis has highlighted the great influence of the valve lift on the volumetric efficiency of the intake and exhaust system. Furthermore, the global investigation has demonstrated that the throttle angle has a significant influence on the head permeability during the induction phase. Particularly, the throttling process effect increases with the valve lift. Finally, the work has shown that all experimental data can be correlated by a single curve if an opportune dimensionless plot is adopted.

scholarly journals Comparative analysis of the fluid dynamic efficiency of standard and alternative intake strategies for multivalve spark-ignition engines

2013 ◽  
Vol 2 (2) ◽  
pp. 140 ◽  
Author(s):  
Angelo Algieri
Keyword(s):  
Combustion Engine ◽  
Fluid Dynamic ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Valve Lift ◽  
Spark Ignition Engines ◽  
Dynamic Efficiency ◽  
Noticeable Effect ◽  
Dynamic Performances ◽  
Experimental Characterisation

The work aims at investigating the fluid dynamic performances of a multivalve spark-ignition engine and at evaluating the influence of the throttling process on the engine permeability. To this purpose, a production four-stroke internal combustion engine is analysed during the intake phase. The experimental characterisation is carried out at the steady flow rig in terms of dimensionless discharge and flow coefficients. The global investigation illustrates the noticeable effect of the valve lift on the engine head breathability. Furthermore, the experimental analysis demonstrates that the throttling process has a significant influence on the volumetric efficiency of the intake system and this effect increases with the valve lift. Finally, alternative strategies are studied in order to improve the engine fluid dynamic efficiency at partial loads. Specifically, the research shows that inlet valve deactivation and the adoption of asymmetric intake valve lifts assure an increase in head permeability.

scholarly journals Numerical study on the effects of intake charge on oxy-fuel combustion in a dual-injection spark ignition engine at economical oxygen-fuel ratios

2021 ◽  
pp. 146808742110222
Author(s):  
Xiang Li ◽  
Yiqiang Pei ◽  
Zhijun Peng ◽  
Tahmina Ajmal ◽  
Khaqan-Jim Rana ◽  
...  
Keyword(s):  
Combustion Engine ◽  
Numerical Study ◽  
Carbon Capture And Storage ◽  
Spark Ignition ◽  
Fuel Combustion ◽  
Spark Ignition Engine ◽  
Gasoline Direct Injection ◽  
Brake Mean Effective Pressure ◽  
Dual Injection ◽  
Injection Strategies

In order to decrease Carbon Dioxide (CO2) emissions, Oxy-Fuel Combustion (OFC) technology with Carbon Capture and Storage (CCS) is being developed in Internal Combustion Engine (ICE). In this article, a numerical study about the effects of intake charge on OFC was conducted in a dual-injection. Spark Ignition (SI) engine, with Gasoline Direct Injection (GDI), Port Fuel Injection (PFI) and P-G (50% PFI and 50% GDI) three injection strategies. The results show that under OFC with fixed Oxygen Mass Fraction (OMF) and intake temperature, the maximum Brake Mean Effective Pressure (BMEP) is each 5.671, 5.649 and 5.646 bar for GDI, P-G and PFI strategy, which leads to a considerable decrease compared to Conventional Air Combustion (CAC). [Formula: see text], [Formula: see text] and [Formula: see text] of PFI are the lowest among three injection strategies. With intake temperature increases from 298 to 378 K, the reduction of BMEP can be up to 12.68%, 12.92% and 12.75% for GDI, P-G and PFI, respectively. Meantime, there is an increase of about 3% in Brake Specific Fuel Consumption (BSFC) and Brake Specific Oxygen Consumption (BSOC). Increasing OMF can improve the performance of BMEP and BSFC, and the trend is more apparent under GDI strategy. Besides, an increasing tendency can be observed for cylinder pressure and in-cylinder temperature under all injection strategies with the increase of OMF.

3D CFD Simulations of Hydrogen Fuelled Spark Ignition Engine

2008 ◽  
Author(s):  
Dinesh D. Adgulkar ◽  
N. V. Deshpande ◽  
S. B. Thombre ◽  
I. K. Chopde
Keyword(s):  
Internal Combustion Engine ◽  
Power Output ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Flame Speed ◽  
Spark Ignition Engine ◽  
Cfd Simulations ◽  
Turbulent Flame Speed ◽  
Combustion Of Hydrogen

By supporting hydrogen as an alternative fuel to the conventional fuel i.e. gasoline, new era of renewable and carbon neutral energy resources can be introduced. Hence, development of hydrogen fuelled internal combustion engine for improved power density and less emission of NOx has become today’s need and researchers are continuously extending their efforts in the improvement of hydrogen fuelled internal combustion engine. In this work, three dimensional CFD simulations were performed using CFD code (AVL FIRE) for premixed combustion of hydrogen. The simplified 3D geometry of engine with single valve i.e. inlet valve was considered for the simulation. Various combustion models for spark ignition for hydrogen i.e. Eddy Breakup model, Turbulent Flame Speed Closure Combustion Model, Coherent Flame model, Probability Density Function model were tested and validated with available simulation results. Results obtained in simulation indicate that the properties of hydrogen i.e. high flame speed, wide flammability limit, and high ignition temperature are among the main influencing factors for hydrogen combustion being different than that of gasoline. Different parameters i.e. spark advance angle (TDC to 40° before TDC in the step of 5°), rotational speed (1200 to 3000 rpm in the step of 300 rpm), equivalence ratio (0.5 to 1.2 in the step of 0.1), and compression ratio (8, 9 and 10) were used to simulate the combustion of hydrogen in spark ignition engine and to investigate their effects on the engine performance, which is in terms of pressure distribution, temperature distribution, species mass fraction, reaction progress variable and rate of heat release for complete cycle. The results of power output for hydrogen were also compared with that of gasoline. It has been observed that power output for hydrogen is almost 12–15% less than that of gasoline.

Experimental research on pumping losses and combustion performance in an unthrottled spark ignition engine

2018 ◽  
Vol 232 (7) ◽  
pp. 888-897 ◽  
Author(s):  
Tingting Sun ◽  
Yingjie Chang ◽  
Zongfa Xie ◽  
Kaiyu Zhang ◽  
Fei Chen ◽  
...  
Keyword(s):  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Valve Lift ◽  
Combustion Characteristic ◽  
Spark Ignition Engines ◽  
Intake Valve ◽  
Valve System ◽  
Combustion Performance ◽  
Intake Swirl ◽  
Variable Valve

A novel fully hydraulic variable valve system is described in this paper, which achieves continuous variations in maximum valve lift, valve opening duration, and the timing of valve closing. The load of the unthrottled spark ignition engine with fully hydraulic variable valve system is controlled by using an early intake valve closing rather than the conventional throttle valve. The experiments were carried out on BJ486EQ spark ignition engine with fully hydraulic variable valve system. Pumping losses of the throttled and unthrottled spark ignition engines at low-to-medium loads are compared and the reason of it decreasing significantly in the unthrottled spark igntion engine is analyzed. The combustion characteristic parameters, such as cyclic variation, CA50, and heat release rate, were analyzed. The primary reasons for the lower combustion rate in the unthrottled spark ignition engines are discussed. In order to improve the evaporation of fuel and mix with air in an unthrottled spark ignition engine, the in-cylinder swirl is organized with a helical intake valve, which can generate a strong intake swirl at low intake valve lifts. The effects of the intake swirl on combustion performance are investigated. Compared with the throttled spark ignition engine, the brake specific fuel consumption of the improved unthrottled spark ignition engine is reduced by 4.1% to 11.2%.

scholarly journals The influence of exhaust system leak on the operating parameters of a turbocharged spark ignition engine

2018 ◽  
Vol 19 (6) ◽  
pp. 468-472
Author(s):  
Krystian Hennek ◽  
Mariusz Graba
Keyword(s):  
Oxygen Sensor ◽  
Combustion Engine ◽  
Exhaust System ◽  
Spark Ignition Engine ◽  
Si Engine ◽  
The Road ◽  
Torque Measurements ◽  
Si Engines ◽  
Common Technique ◽  
On The Road

Turbocharging of an internal combustion engine is the most common technique to improve an engines’ performance. In present it is not hard to meet vehicles on the road with turbocharged SI engines, which have a high mileage, and because of this fact there is a high risk of exhaust systems leak. This might have its influence not only on the emissions, but also on the vehicles performance. Thereby this dissertation shows the comparative analysis of the influence of exhaust system leak in the catalyzer input on the exhaust gasses composition in the catalyzer output and the operation parameters of an turbocharged SI engine. During the research some parameters were recorded and compared, e. g.: the engines power and torque, the injec-tors opening time, the oxygen sensors voltage signals in the input and in the output of the catalyzer, the concentration of harmful gasses in the exhaust tailpipe. The research was conducted with the use of a single roller MAHA MSR 500 chassis dynamometer. A series of torque measurements was performed. Under these measurements a simulation of the exhaust system leakage of a turbocharged SI passenger car engine was made. As a result three variations of the wideband oxygen sensor acting were reached. The wideband sensor is mounted between the turbocharger unit and the input of the catalyzer. In the test the influence of the leakage on the injector’s opening time and the composition of harmful exhaust substances were pointed.

scholarly journals Operating parameters of a passenger vehicle turbocharged spark ignition engine in conditions of exhaust leakage simulation

2018 ◽  
Vol 19 (6) ◽  
pp. 463-467
Author(s):  
Krystian Hennek ◽  
Mariusz Graba
Keyword(s):  
Oxygen Sensor ◽  
Exhaust System ◽  
Combustion Products ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Oxidation Products ◽  
Operating Parameters ◽  
Passenger Vehicle ◽  
Chassis Dynamometer ◽  
Excess Air

Paper discussed the influence of exhaust system leakage on the utility parameters and toxic combustion products emission of a turbocharged passenger car spark ignition engine. A comparative analysis of the data gathered in the research carried out using the MAHA MSR 500 single roller chassis dynamometer was conducted, where the exhaust system was sealed and leaking in the area of the wideband oxygen sensor mounting bracket. The presented data refers to among others: the emissions of harmful gasoline oxidation products (HC, CO), the courses of power generated by the engine and the momentary values of excess air ratio. The EUDC driving cycle was used in the research.

scholarly journals Development of a Computationally Efficient Tabulated Chemistry Solver for Internal Combustion Engine Optimization Using Stochastic Reactor Models

2020 ◽  
Vol 10 (24) ◽  
pp. 8979
Author(s):  
Andrea Matrisciano ◽  
Tim Franken ◽  
Laura Catalina Gonzales Mestre ◽  
Anders Borg ◽  
Fabian Mauss
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Reactor Model ◽  
Progress Variable ◽  
Tabulated Chemistry ◽  
Computer Aided ◽  
Reactor Models

The use of chemical kinetic mechanisms in computer aided engineering tools for internal combustion engine simulations is of high importance for studying and predicting pollutant formation of conventional and alternative fuels. However, usage of complex reaction schemes is accompanied by high computational cost in 0-D, 1-D and 3-D computational fluid dynamics frameworks. The present work aims to address this challenge and allow broader deployment of detailed chemistry-based simulations, such as in multi-objective engine optimization campaigns. A fast-running tabulated chemistry solver coupled to a 0-D probability density function-based approach for the modelling of compression and spark ignition engine combustion is proposed. A stochastic reactor engine model has been extended with a progress variable-based framework, allowing the use of pre-calculated auto-ignition tables instead of solving the chemical reactions on-the-fly. As a first validation step, the tabulated chemistry-based solver is assessed against the online chemistry solver under constant pressure reactor conditions. Secondly, performance and accuracy targets of the progress variable-based solver are verified using stochastic reactor models under compression and spark ignition engine conditions. Detailed multicomponent mechanisms comprising up to 475 species are employed in both the tabulated and online chemistry simulation campaigns. The proposed progress variable-based solver proved to be in good agreement with the detailed online chemistry one in terms of combustion performance as well as engine-out emission predictions (CO, CO2, NO and unburned hydrocarbons). Concerning computational performances, the newly proposed solver delivers remarkable speed-ups (up to four orders of magnitude) when compared to the online chemistry simulations. In turn, the new solver allows the stochastic reactor model to be computationally competitive with much lower order modeling approaches (i.e., Vibe-based models). It also makes the stochastic reactor model a feasible computer aided engineering framework of choice for multi-objective engine optimization campaigns.

scholarly journals The impact of ignition system damage on the emission of toxic substances in a spark-ignition internal combustion engine

2019 ◽  
Vol 179 (4) ◽  
pp. 86-92
Author(s):  
Mieczysław DZIUBIŃSKI ◽  
Ewa SIEMIONEK ◽  
Artur DROZD ◽  
Michał ŚCIRKA ◽  
Adam KISZCZAK ◽  
...  
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Exhaust Gas ◽  
Toxic Substances ◽  
Ignition System ◽  
The Impact

The article discusses the impact of ignition system damage on the emission of toxic subcategories in a spark-ignition internal combustion engine. The aim of the work was to develop an analytical model of ignition system diagnostics, test performance and comparative analysis of the results of simulations and experiments. The model developed allows to analyse the basic parameters of the ignition system affecting the content of toxic substances in the exhaust. Experimental tests were carried out using the MAHA MGT5 exhaust gas analyser for four different combustion engines fueled with petrol at various operating conditions. During the tests, the content of toxic substances in the exhaust gas of a properly working engine and the engine working with damage to the ignition system were registered. The tests will be used to assess the impact of the damage of the spark-ignition engine on the emission of individual components of toxic fumes.

Sign in / Sign up

Export Citation Format

Share Document