Carmacks Copper Cu-Au-Ag Deposit: Mineralization and Postore Migmatization of a Stikine Arc Porphyry Copper System in Yukon, Canada

2020 ◽  
Vol 115 (7) ◽  
pp. 1413-1442
Author(s):  
Nikolett Kovacs ◽  
Murray M. Allan ◽  
James L. Crowley ◽  
Maurice Colpron ◽  
Craig J.R. Hart ◽  
...  

Abstract Late Triassic to Early Jurassic porphyry Cu mineralization is common in British Columbia, yet there are few age-equivalent porphyry occurrences in Yukon. This study presents new data for the enigmatic Carmacks Copper Cu-Au-Ag deposit in south-central Yukon, Canada, which is hosted in amphibolite facies metamorphic inliers within the Early Jurassic Granite Mountain batholith. Sulfide mineralization occurs mainly as net-textured bornite and chalcopyrite in leucosome, and as chalcopyrite ± pyrite blebs and disseminations in amphibolite and quartz-plagioclase-biotite schist. Several studies suggest that the Carmacks Copper deposit and the nearby Minto deposit are related to porphyry belts in British Columbia, but constraining the timing of alteration, mineralization, and metamorphism has been difficult. This study establishes a geologic and high-precision geochronologic framework for sulfide mineralization and its host rocks at the Carmacks Copper deposit, using Re-Os dating of molybdenite, and chemical abrasion-thermal ionization mass spectrometry (CA-TIMS) analysis of both whole zircon grains and laser-cut fragments of complexly zoned zircon grains. Our data indicate that the igneous protolith of the metamorphic inliers formed at 217.53 ± 0.16 Ma, followed by peak metamorphism at amphibolite facies at 205.82 ± 0.23 Ma, which occurred prior to Granite Mountain batholith emplacement but subsequent to Cu-Au-Ag mineralization of the protolith. An early phase of the Granite Mountain batholith was emplaced at 199.84 ± 0.14 Ma, followed by the main phase at 195 to 194 Ma. A second generation of metamorphic zircon in migmatite at 196.01 ± 0.12 Ma represents a partial melting event associated with Granite Mountain batholith emplacement. Two petrographically distinct populations of molybdenite are present in unstrained, net-textured copper sulfides. A sample dominated by strained molybdenite yielded an 187Re/187Os age of 212.5 ± 1.0 Ma, which represents the minimum mineralization age of the protolith. A sample dominated by euhedral grains yielded an 187Re/187Os age of 198.5 ± 0.9 Ma, constraining the maximum age of sulfide remobilization. These results indicate that primary mineralization is >212.5 Ma and potentially coeval with the ~217.5 Ma generation of Late Triassic magmatism. The mineralized protolith, best interpreted as the potassic alteration zone of a Late Triassic (~217–213 Ma) porphyry Cu-Au system, was metamorphosed to amphibolite facies at ~206 Ma, and subsequently migmatized during 200 to 194 Ma intrusion of the Granite Mountain batholith. The chalcopyrite-bornite-dominant assemblage in neosome precipitated from an immiscible Cu-Fe-S melt phase that partly consumed xenocrystic molybdenite and reprecipitated new molybdenite grains. The Carmacks Copper deposit and the related Minto deposit are remnants of a Late Triassic porphyry belt, where a significant fraction of the original metal endowment was likely lost through digestion of mineralized rocks by midcrustal magma in the Early Jurassic. These Yukon deposits are rare examples of metamorphosed porphyry Cu systems in the global geologic record, where rapid tectonic burial following mineralization was the principal factor in their preservation.

2021 ◽  
Author(s):  
Robert G. Lee ◽  
Alain Plouffe ◽  
Travis Ferbey ◽  
Craig J.R. Hart ◽  
Pete Hollings ◽  
...  

Abstract The detrital zircons in tills overlying the Guichon Creek batholith, British Columbia, Canada, have trace element concentrations and ages similar to those of zircons from the bedrock samples from which they are interpreted to have been sourced. Rocks from the core of the batholith that host porphyry copper mineralization have distinct zircon compositions relative to the distal, barren margin. We analyzed 296 zircons separated from 12 subglacial till samples to obtain U-Pb ages and trace element compositions. Laser ablation U-Pb ages of the detrital zircons overlap within error with chemical abrasion-thermal ionization mass spectrometry U-Pb ages of the Late Triassic Guichon Creek batholith and confirm that the detrital zircons are likely derived from the batholith. The youngest intrusions of the batholith produced the Highland Valley Copper porphyry deposits and contain distinctive zircons with elevated Eu/EuN* >0.4 attributed to high magmatic water contents and oxidation states, indicating higher porphyry copper potential. Zircon from till samples adjacent to and 9 km down-ice from the mineralized centers have mean Eu/EuN* >0.4, which are indicative of potential porphyry copper mineralization. Detrital zircon grains from more distal up- and down-ice locations (10–15 km) have zircon Eu/EuN* mean values of 0.26 to 0.37, reflecting background values. We conclude that detrital zircon compositions in glacial sediments transported several kilometers can be used to establish the regional potential for porphyry copper mineralization.


2004 ◽  
Vol 41 (1) ◽  
pp. 103-125 ◽  
Author(s):  
Nathan T Petersen ◽  
Paul L Smith ◽  
James K Mortensen ◽  
Robert A Creaser ◽  
Howard W Tipper

Jurassic sedimentary rocks of southern to central Quesnellia record the history of the Quesnellian magmatic arc and reflect increasing continental influence throughout the Jurassic history of the terrane. Standard petrographic point counts, geochemistry, Sm–Nd isotopes and detrital zircon geochronology, were employed to study provenance of rocks obtained from three areas of the terrane. Lower Jurassic sedimentary rocks, classified by inferred proximity to their source areas as proximal or proximal basin are derived from an arc source area. Sandstones of this age are immature. The rocks are geochemically and isotopically primitive. Detrital zircon populations, based on a limited number of analyses, have homogeneous Late Triassic or Early Jurassic ages, reflecting local derivation from Quesnellian arc sources. Middle Jurassic proximal and proximal basin sedimentary rocks show a trend toward more evolved mature sediments and evolved geochemical characteristics. The sandstones show a change to more mature grain components when compared with Lower Jurassic sedimentary rocks. There is a decrease in εNdT values of the sedimentary rocks and Proterozoic detrital zircon grains are present. This change is probably due to a combination of two factors: (1) pre-Middle Jurassic erosion of the Late Triassic – Early Jurassic arc of Quesnellia, making it a less dominant source, and (2) the increase in importance of the eastern parts of Quesnellia and the pericratonic terranes, such as Kootenay Terrane, both with characteristically more evolved isotopic values. Basin shale environments throughout the Jurassic show continental influence that is reflected in the evolved geochemistry and Sm–Nd isotopes of the sedimentary rocks. The data suggest southern Quesnellia received material from the North American continent throughout the Jurassic but that this continental influence was diluted by proximal arc sources in the rocks of proximal derivation. The presence of continent-derived material in the distal sedimentary rocks of this study suggests that southern Quesnellia is comparable to known pericratonic terranes.


2017 ◽  
Vol 112 (8) ◽  
pp. 1857-1888 ◽  
Author(s):  
Michael D’Angelo ◽  
Alfaro Miguel ◽  
Pete Hollings ◽  
Kevin Byrne ◽  
Stephen Piercey ◽  
...  

2017 ◽  
Vol 112 (7) ◽  
pp. 1719-1746 ◽  
Author(s):  
Jia Chang ◽  
Jian-Wei Li ◽  
David Selby ◽  
Jia-Cheng Liu ◽  
Xiao-Dong Deng

Abstract The Yulong porphyry Cu-Mo deposit, the third largest porphyry Cu deposit in China, contains proven reserves of > 6.5 million metric tons (Mt) Cu and 0.4 Mt Mo. Previous radiometric dating studies have provided numerous ages for this deposit, but the timing and duration of the process governing the deposition of Cu and Mo remains not well constrained. In this paper, we first document multiple stages of mineralization and hydrothermal alteration associated with distinct magmatic pulses at Yulong by field and textural relationships, and then present high-precision molybdenite Re-Os ages of 14 quartz-molybdenite ± chalcopyrite veins representing these stages to precisely constrain the timing and duration of Cu-Mo mineralization. The ore-hosting Yulong composite stock consists of three successive porphyry intrusions: (1) monzonitic granite porphyry (MGP), (2) K-feldspar granite porphyry (KGP), and (3) quartz albite porphyry (QAP). The vein formation, Cu-Mo mineralization, and ore-related alteration are grouped into early, transitional, and late stages with respect to the intrusive history. The first two porphyry intrusions are followed by cyclical sequences of veining that are mainly associated with potassic alteration and have formed (1) ME vein/USTT, (2) EBE/T veins, (3) A1E/T veins, (4) A2E/BT veins, and (5) A3E/T veins. A2E/BT and A3E/T veins of the early and transitional stages are dominated by quartz and chalcopyrite ± pyrite, respectively, and represent the main Cu-Mo mineralization events. More than 80% of Cu and Mo at Yulong were deposited in the early stage with the remainder being formed in the transitional stage. The late-stage pyrite-quartz veins (DL), which are characterized by sericitic alteration halos, postdate the intrusion of QAP dikes and have no economic significance. Molybdenite Re-Os ages of A2E and BT veins indicate that sulfide deposition at Yulong was episodic over a prolonged history lasting over 5.13 ± 0.23 m.y. (1σ). However, the bulk Cu-Mo ores formed in a shorter time interval of 1.36 ± 0.24 m.y. (1σ) with most Cu precipitated in a more restricted timespan of 0.82 ± 0.24 m.y. (1σ) in the early stage. These results, combined with geochronologic data from porphyry copper deposits elsewhere, confirm that multiple magmatic-hydrothermal pulses with a lifespan of tens to hundreds of thousands of years are sufficient to form a giant porphyry copper deposit. Factors such as metal concentration, volume, and focusing efficiency of ore-forming fluids could have played important roles in producing a giant porphyry Cu deposit regardless of a short- or long-lived magmatic-hydrothermal system.


2019 ◽  
Vol 11 (14) ◽  
pp. 1729 ◽  
Author(s):  
Mengjuan Wu ◽  
Kefa Zhou ◽  
Quan Wang ◽  
Jinlin Wang

Identifying hydrothermal zoning pattern associated with porphyry copper deposit is important for indicating its economic potential. Traditional approaches like systematic sampling and conventional geological mapping are time-consuming and labor extensive, and with limitations for providing small scale information. Recent developments suggest that remote sensing is a powerful tool for mapping and interpreting the spatial pattern of porphyry Cu deposit. In this study, we integrated in situ spectral measurement taken at the Yudai copper deposit in the Kalatag district, northwestern China, information obtained by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), as well as the spectra of samples (hand-specimen) measured using an Analytical Spectral Device (ASD) FieldSpec4 high-resolution spectrometer in laboratory, to map the hydrothermal zoning pattern of the copper deposit. Results proved that the common statistical approaches, such as relative band depth and Principle Component Analysis (PCA), were unable to identify the pattern accurately. To address the difficulty, we introduced a curve-fitting technique for ASTER shortwave infrared data to simulate Al(OH)-bearing, Fe/Mg(OH)-bearing, and carbonate minerals absorption features, respectively. The results indicate that the absorption feature parameters can effectively locate the ore body inside the research region, suggesting the absorption feature parameters have great potentials to delineate hydrothermal zoning pattern of porphyry Cu deposit. We foresee the method being widely used in the future.


Sign in / Sign up

Export Citation Format

Share Document