Aseismic Refinement of Orogenic Gold Systems

2020 ◽  
Vol 115 (1) ◽  
pp. 33-50 ◽  
Author(s):  
Christopher R. Voisey ◽  
David Willis ◽  
Andrew G. Tomkins ◽  
Christopher J.L. Wilson ◽  
Steven Micklethwaite ◽  
...  
Keyword(s):  
Au Nanoparticles ◽  
Secondary Ion Mass Spectrometry ◽  
Galvanic Corrosion ◽  
Wall Rock ◽  
Pressure Solution ◽  
Optical Scanning ◽  
Quartz Veins ◽  
Transmission Electron ◽  
And Migration ◽  
Pressure Dissolution

Abstract Orogenic Au deposits have contributed the majority of Au recovered globally throughout history. However, the mechanism that concentrates Au to extremely high bonanza grades in small domains within these deposits remains enigmatic. The volume of fluid required to provide extreme Au endowments in localized occurrences is not reflected in field observations (e.g., in the extent of quartz veining or hydrothermal alteration). Detailed optical, scanning and transmission electron microscopy, nanoscale secondary ion mass spectrometry, and 3-D neutron tomography have been used to investigate the processes responsible for development of anomalously high grade ore (upward of 3% Au) found in quartz veins at Fosterville gold mine (Victoria, Australia). Distinct textural settings of visible Au include (1) Au concentrated along pressure solution seams associated with wall-rock selvages, (2) as nano- to microscale dusty Au seams parallel to pressure solution seams, and (3) in microscale tension fractures perpendicular to stylolitic seams. The distribution of Au in arsenopyrite and pyrite hosted within pressure solution seams changes as a function of the extent of deformation. Sulfides in highly deformed pressure solution seams exclusively host Au as nano- to micrometer-sized clusters within features associated with corrosion and brittle failure, whereas sulfides in mildly deformed pressure solution seams have Au bound in the crystal structure. It is proposed that Au supersaturation in fluids introduced during seismic periods led to the deposition of abundant Au nanoparticles in quartz-carbonate veins. Subsequent pressure dissolution of vein quartz and carbonate during interseismic intervals allowed for episodic increase in the Au/quartz ratio and permitted liberation and migration of Au nanoparticles, promoting Au grain growth in favorable textural settings. Galvanic corrosion and brittle fracturing of auriferous sulfides during the interseismic period allowed additional remobilization and/or enrichment of sulfide-hosted Au. Repetition of this mechanism over the time scale of deposit formation acted to concentrate Au within the lodes. This Au ore upgrading model, referred to as “aseismic refinement,” provides a new insight for the genesis of ultrarich Au mineralization and, based on textures reported from many Au deposits, may be a globally significant component in the formation of orogenic Au deposits.

Effects of Concurrent Co or Ti Silicidation on Transient Diffusion and End-of-Range Damage in Phosphorus Implanted Silicon

1992 ◽  
Vol 262 ◽  
Author(s):  
J.W. Honeycutt ◽  
J. Ravi ◽  
G. A. Rozgonyi
Keyword(s):  
Secondary Ion Mass Spectrometry ◽  
Complete Removal ◽  
Dislocation Loops ◽  
Enhanced Diffusion ◽  
Depth Profiles ◽  
Enhanced Dissolution ◽  
Implantation Damage ◽  
Transmission Electron ◽  
Defect Behavior ◽  
Secondary Ion

ABSTRACTThe effects of Ti and Co silicidation on P+ ion implantation damage in Si have been investigated. After silicidation of unannealed 40 keV, 2×1015 cm-2 P+ implanted junctions by rapid thermal annealing at 900°C for 10–300 seconds, secondary ion mass spectrometry depth profiles of phosphorus in suicided and non-silicided junctions were compared. While non-silicided and TiSi2 suicided junctions exhibited equal amounts of transient enhanced diffusion behavior, the junction depths under COSi2 were significantly shallower. End-of-range interstitial dislocation loops in the same suicided and non-silicided junctions were studied by planview transmission electron microscopy. The loops were found to be stable after 900°C, 5 minute annealing in non-silicided material, and their formation was only slightly effected by TiSi2 or COSi2 silicidation. However, enhanced dissolution of the loops was observed under both TiSi2 and COSi2, with essentially complete removal of the defects under COSi2 after 5 minutes at 900°C. The observed diffusion and defect behavior strongly suggest that implantation damage induced excess interstitial concentrations are significantly reduced by the formation and presence of COSi2, and to a lesser extent by TiSi2. The observed time-dependent defect removal under the suicide films suggests that vacancy injection and/or interstitial absorption by the suicide film continues long after the suicide chemical reaction is complete.

Effect of Laser Thermal Processing on Defect Evolution in Silicon

2002 ◽  
Vol 717 ◽  
Author(s):  
Erik Kuryliw ◽  
Kevin S. Jones ◽  
David Sing ◽  
Michael J. Rendon ◽  
Somit Talwar
Keyword(s):  
Point Defects ◽  
Thermal Processing ◽  
Defect Formation ◽  
Secondary Ion Mass Spectrometry ◽  
Laser Energy ◽  
Process Window ◽  
Loop Formation ◽  
Transmission Electron ◽  
Ultra Shallow Junctions ◽  
Laser Thermal Processing

AbstractLaser Thermal Processing (LTP) involves laser melting of an implantation induced preamorphized layer to form highly doped ultra shallow junctions in silicon. In theory, a large number of interstitials remain in the end of range (EOR) just below the laser-formed junction. There is also the possibility of quenching in point defects during the liquid phase epitaxial regrowth of the melt region. Since post processing anneals are inevitable, it is necessary to understand both the behavior of these interstitials and the nature of point defects in the recrystallized-melt region since they can directly affect deactivation and enhanced diffusion. In this study, an amorphizing 15 keV 1 x 1015/cm2 Si+ implant was done followed by a 1 keV 1 x 1014/cm2 B+ implant. The surface was then laser melted at energy densities between 0.74 and 0.9 J/cm2 using a 308 nm excimer-laser. It was found that laser energy densities above 0.81 J/cm2 melted past the amorphous-crystalline interface. Post-LTP furnace anneals were performed at 750°C for 2 and 4 hours. Transmission electron microscopy was used to analyze the defect formation after LTP and following furnace anneals. Secondary ion mass spectrometry measured the initial and final boron profiles. It was observed that increasing the laser energy density led to increased dislocation loop formation and increased diffusion after the furnace anneal. A maximum loop density and diffusion was observed at the end of the process window, suggesting a correlation between the crystallization defects and the interstitial evolution.

scholarly journals Subcellular Investigation of Photosynthesis-Driven Carbon Assimilation in the Symbiotic Reef Coral Pocillopora damicornis

mBio ◽  
2015 ◽  
Vol 6 (1) ◽  
Author(s):  
Christophe Kopp ◽  
Isabelle Domart-Coulon ◽  
Stephane Escrig ◽  
Bruno M. Humbel ◽  
Michel Hignette ◽  
...  
Keyword(s):  
Lipid Droplets ◽  
Secondary Ion Mass Spectrometry ◽  
Reef Coral ◽  
Carbon Assimilation ◽  
Isotopic Labeling ◽  
Cellular Level ◽  
Coral Tissue ◽  
Pocillopora Damicornis ◽  
Carbon And Nitrogen ◽  
Transmission Electron

ABSTRACT  Reef-building corals form essential, mutualistic endosymbiotic associations with photosynthetic Symbiodinium dinoflagellates, providing their animal host partner with photosynthetically derived nutrients that allow the coral to thrive in oligotrophic waters. However, little is known about the dynamics of these nutritional interactions at the (sub)cellular level. Here, we visualize with submicrometer spatial resolution the carbon and nitrogen fluxes in the intact coral-dinoflagellate association from the reef coral Pocillopora damicornis by combining nanoscale secondary ion mass spectrometry (NanoSIMS) and transmission electron microscopy with pulse-chase isotopic labeling using [13C]bicarbonate and [15N]nitrate. This allows us to observe that (i) through light-driven photosynthesis, dinoflagellates rapidly assimilate inorganic bicarbonate and nitrate, temporarily storing carbon within lipid droplets and starch granules for remobilization in nighttime, along with carbon and nitrogen incorporation into other subcellular compartments for dinoflagellate growth and maintenance, (ii) carbon-containing photosynthates are translocated to all four coral tissue layers, where they accumulate after only 15 min in coral lipid droplets from the oral gastroderm and within 6 h in glycogen granules from the oral epiderm, and (iii) the translocation of nitrogen-containing photosynthates is delayed by 3 h. IMPORTANCE  Our results provide detailed in situ subcellular visualization of the fate of photosynthesis-derived carbon and nitrogen in the coral-dinoflagellate endosymbiosis. We directly demonstrate that lipid droplets and glycogen granules in the coral tissue are sinks for translocated carbon photosynthates by dinoflagellates and confirm their key role in the trophic interactions within the coral-dinoflagellate association.

scholarly journals Investigation of Zirconium Effect on the Corrosion Resistance of Aluminum Alloy Using Electrochemical Methods and Numerical Simulation in an Acidified Synthetic Sea Salt Solution

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1982 ◽  
Author(s):  
Yong-Sang Kim ◽  
Jong Park ◽  
Byeong-Seon An ◽  
Young Lee ◽  
Cheol-Woong Yang ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Microprobe Analysis ◽  
Electron Microprobe Analysis ◽  
Galvanic Corrosion ◽  
Sea Salt ◽  
Al Alloy ◽  
Alloying Element ◽  
Intermetallic Particles ◽  
Transmission Electron ◽  
Corrosion Simulation

Corrosion resistance of Zr that has been added to an Al alloy (U1070) is higher than that of a commercial Al alloy (A1070). A decreasing number and size of Al3Fe intermetallic particles (IMPs) were observed by electron microprobe analysis and transmission electron microscopy. Based on the numerical corrosion simulation, it was confirmed that decreasing the number and size of IMPs was favorable for improving the corrosion resistance of the Al alloy due to the reduction of the galvanic effect. In addition, Al3Zr was found to be insignificant in promoting galvanic corrosion within the Al matrix. Thus, Zr is an advantageous alloying element for improving the corrosion resistance of the Al alloy.

STRUCTURAL AND MORPHOLOGICAL CHARACTERIZATION OF GOLD NANOPARTICLES BY TEM AND DIGITAL CIS TECHNIQUE

2010 ◽  
Vol 09 (05) ◽  
pp. 399-406 ◽  
Author(s):  
A. A. EL-DALY
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Au Nanoparticles ◽  
Morphological Characterization ◽  
Particle Sizes ◽  
Rigid Surface ◽  
Gold Nanocrystals ◽  
Driving Mechanisms ◽  
Transmission Electron

In this paper, we report a convenient and informative procedure for detecting the morphology and surface structure of individual gold nanocrystals using digital Crystal Image Software (CIS) processing of transmission electron microscopy (TEM) image, which comprises coalescence phenomena of these nanoparticles. The results show that the internal structure of Au nanoparticles has a core of gold atoms arranged as a Marks decahedron, surrounded by additional gold–organic compound layers forming a rigid surface layer, and its outer layer comprises four staple motif bridge molecules that resemble handles, formed an unusual pattern. The obtained results improved our understanding of the basics of the coalescence phenomena such as the driving mechanisms acting at different particle sizes. However, these discrete natures of the nanoparticles will assist in the understanding of principles of nanocore assembly and opens a new window for nanoparticles chemistry.

scholarly journals Изменение структуры и свойств приповерхностного слоя Si, имплантированного Zn, в зависимости от флюенса облучения ионами -=SUP=-132-=/SUP=-Xe-=SUP=-26+-=/SUP=- с энергией 167 МэВ

2019 ◽  
Vol 53 (3) ◽  
pp. 332
Author(s):  
В.В. Привезенцев ◽  
В.С. Куликаускас ◽  
В.А. Скуратов ◽  
О.С. Зилова ◽  
А.А. Бурмистров ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Zinc Oxide ◽  
Cross Section ◽  
Secondary Ion Mass Spectrometry ◽  
Sample Surface ◽  
Transmission Electron ◽  
Oxide Phases ◽  
Secondary Ion ◽  
Surface Pores ◽  
Scanning Electron

AbstractSingle-crystal n -Si(100) wafers are implanted with ^64Zn^+ ions with an energy of 50 keV and dose of 5 × 10^16 cm^–2. Then the samples are irradiated with ^132Xe^26+ ions with an energy of 167 MeV in the range of fluences from 1 × 10^12 to 5 × 10^14 cm^–2. The surface and cross section of the samples are visualized by scanning electron microscopy and transmission electron microscopy. The distribution of implanted Zn atoms is studied by time-of-flight secondary-ion mass spectrometry. After irradiation with Xe, surface pores and clusters consisting of a Zn–ZnO mixture are observed at the sample surface. In the amorphized subsurface Si layer, zinc and zinc-oxide phases are detected. After irradiation with Xe with a fluence of 5 × 10^14 cm^–2, no zinc or zinc-oxide clusters are detected in the samples by the methods used in the study.

Aquatic Fern (AzollaSp.) Assisted Synthesis of Gold Nanoparticles

2016 ◽  
Vol 15 (01n02) ◽  
pp. 1650008 ◽  
Author(s):  
Anal K. Jha ◽  
K. Prasad
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Gold Nanoparticles ◽  
Surface Plasmon Resonance ◽  
Au Nanoparticles ◽  
X Ray ◽  
Aquatic Fern ◽  
Transmission Electron ◽  
Anthraquinone Glycosides ◽  
Uv Visible

Aquatic pteridophyte (Azolla sp.) was taken to assess its potential to synthesize the metal (Au) nanoparticles. The synthesized particles were characterized using X-ray, UV-visible, scanning and transmission electron microscopy analyses. Nanoparticles almost spherical in shape having the sizes of 5–17[Formula: see text]nm are found. UV-visible study revealed the surface plasmon resonance at 538[Formula: see text]nm. Responsible phytochemicals for the transformation were principally phenolics, tannins, anthraquinone glycosides and sugars present abundantly in the plant thereby bestowing it adaptive prodigality. Also, the use of Azolla sp. for the synthesis of gold nanoparticles offers the benefit of eco-friendliness.

Determination of the Distribution of Ion Implantation Boron in Silicon

2000 ◽  
Vol 650 ◽  
Author(s):  
Te-Sheng Wang ◽  
A.G. Cullis ◽  
E.J.H. Collart ◽  
A.J. Murrell ◽  
M.A. Foad
Keyword(s):  
Electron Microscopy ◽  
Secondary Ion Mass Spectrometry ◽  
Low Energy ◽  
Concentration Profiles ◽  
Impurity Profile ◽  
Transmission Electron ◽  
Device Applications ◽  
P Type ◽  
Secondary Ion

ABSTRACTBoron is the most important p-type dopant in Si and it is essential that, especially for low energy implantation, both as-implanted B distributions and those produced by annealing should be characterized in very great detail to obtain the required process control for advanced device applications. While secondary ion mass spectrometry (SIMS) is ordinarily employed for this purpose, in the present studies implant concentration profiles have been determined by direct B imaging with approximately nanometer depth and lateral resolution using energy-filtered imaging in the transmission electron microscopy. The as-implanted B impurity profile is correlated with theoretical expectations: differences with respect to the results of SIMS measurements are discussed. Changes in the B distribution and clustering that occur after annealing of the implanted layers are also described.

Lithium tracer diffusion in near stoichiometric LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Daniel Uxa ◽  
Harald Schmidt
Keyword(s):  
Cathode Material ◽  
Secondary Ion Mass Spectrometry ◽  
Lithium Ion ◽  
Tracer Diffusion ◽  
Side Reactions ◽  
Battery Materials ◽  
Self Diffusion ◽  
Thermally Activated ◽  
Average Grain Size ◽  
And Migration

Abstract The compound LiNi0.5Mn1.5O4 is used as novel cathode material for Li-ion batteries and represents a variant to replace conventional LiMn2O4. For a further improvement of battery materials it is necessary to understand kinetic processes at and in electrodes and the underlying diffusion of lithium that directly influences charging/discharging times, maximum capacities, and possible side reactions. In the present study Li tracer self-diffusion is investigated in polycrystalline sintered bulk samples of near stoichiometric LiNi0.5Mn1.5O4 with an average grain size of about 50–70 nm in the temperature range between 250 and 600 °C. For analysis, stable 6Li tracers are used in combination with secondary ion mass spectrometry (SIMS). The tracer diffusivities can be described by the Arrhenius law with an activation enthalpy of (0.97 ± 0.05) eV, which is interpreted as the sum of the formation and migration energy of a thermally activated Li vacancy.

Sign in / Sign up

Export Citation Format

Share Document