scholarly journals MSWEP: 3-hourly 0.25° global gridded precipitation (1979–2015) by merging gauge, satellite, and reanalysis data

2016 ◽  
Author(s):  
Hylke E. Beck ◽  
Albert I. J. M. van Dijk ◽  
Vincenzo Levizzani ◽  
Jaap Schellekens ◽  
Diego G. Miralles ◽  
...  
Keyword(s):  
Land Surface ◽  
Hydrological Modeling ◽  
Grid Cell ◽  
Atmospheric Model ◽  
Reanalysis Data ◽  
The Other ◽  
Weighted Averaging ◽  
Comparative Performance ◽  
Orographic Effects ◽  
Global Precipitation

Abstract. Current global precipitation (P) datasets do not take full advantage of the complementary nature of satellite and reanalysis data. Here, we present Multi-Source Weighted-Ensemble Precipitation (MSWEP), a global P dataset for the period 1979–2015 with a 3-hourly temporal and 0.25° spatial resolution, specifically designed for hydrological modeling. The design philosophy of MSWEP was to optimally merge the highest quality P data sources available as a function of time scale and location. The long-term mean of MSWEP was based on the CHPclim dataset but replaced with more accurate regional datasets where available. A correction for gauge under-catch and orographic effects was introduced by inferring catchment-average P from streamflow (Q) observations at 13,762 stations across the globe. The temporal variability of MSWEP was determined by weighted averaging of P anomalies from seven datasets; two based solely on interpolation of gauge observations (CPC Unified and GPCC), three on satellite remote sensing (CMORPH, GSMaP-MVK, and TMPA 3B42RT), and two on atmospheric model reanalysis (ERA-Interim and JRA-55). For each grid cell, the weight assigned to the gauge-based estimates was calculated from the gauge network density, while the weights assigned to the satellite- and reanalysis-based estimates were calculated from their comparative performance at the surrounding gauges. The quality of MSWEP was compared against four state-of-the-art gauge-adjusted P datasets (WFDEI-CRU, GPCP-1DD, TMPA 3B42, and CPC Unified) using independent P data from 125 FLUXNET tower stations around the globe. MSWEP obtained the highest daily correlation coefficient (R) among the five P datasets for 60.0 % of the stations and a median R of 0.67 versus 0.44–0.59 for the other datasets. We further evaluated the performance of MSWEP using hydrological modeling for 9011 catchments (< 50,000 km2) across the globe. Specifically, we calibrated the simple conceptual hydrological model HBV against daily Q observations with P from each of the different datasets. For the 1058 sparsely-gauged catchments, representative of 83.9 % of the global land surface (excluding Antarctica), MSWEP obtained a median calibration NSE of 0.52 versus 0.29–0.39 for the other P datasets. MSWEP is available via http://www.gloh2o.org.

scholarly journals MSWEP: 3-hourly 0.25° global gridded precipitation (1979–2015) by merging gauge, satellite, and reanalysis data

2017 ◽  
Vol 21 (1) ◽  
pp. 589-615 ◽  
Author(s):  
Hylke E. Beck ◽  
Albert I. J. M. van Dijk ◽  
Vincenzo Levizzani ◽  
Jaap Schellekens ◽  
Diego G. Miralles ◽  
...  
Keyword(s):  
Land Surface ◽  
Hydrological Modeling ◽  
Grid Cell ◽  
Atmospheric Model ◽  
Reanalysis Data ◽  
The Other ◽  
Weighted Averaging ◽  
Comparative Performance ◽  
Orographic Effects ◽  
Global Precipitation

Abstract. Current global precipitation (P) datasets do not take full advantage of the complementary nature of satellite and reanalysis data. Here, we present Multi-Source Weighted-Ensemble Precipitation (MSWEP) version 1.1, a global P dataset for the period 1979–2015 with a 3-hourly temporal and 0.25° spatial resolution, specifically designed for hydrological modeling. The design philosophy of MSWEP was to optimally merge the highest quality P data sources available as a function of timescale and location. The long-term mean of MSWEP was based on the CHPclim dataset but replaced with more accurate regional datasets where available. A correction for gauge under-catch and orographic effects was introduced by inferring catchment-average P from streamflow (Q) observations at 13 762 stations across the globe. The temporal variability of MSWEP was determined by weighted averaging of P anomalies from seven datasets; two based solely on interpolation of gauge observations (CPC Unified and GPCC), three on satellite remote sensing (CMORPH, GSMaP-MVK, and TMPA 3B42RT), and two on atmospheric model reanalysis (ERA-Interim and JRA-55). For each grid cell, the weight assigned to the gauge-based estimates was calculated from the gauge network density, while the weights assigned to the satellite- and reanalysis-based estimates were calculated from their comparative performance at the surrounding gauges. The quality of MSWEP was compared against four state-of-the-art gauge-adjusted P datasets (WFDEI-CRU, GPCP-1DD, TMPA 3B42, and CPC Unified) using independent P data from 125 FLUXNET tower stations around the globe. MSWEP obtained the highest daily correlation coefficient (R) among the five P datasets for 60.0 % of the stations and a median R of 0.67 vs. 0.44–0.59 for the other datasets. We further evaluated the performance of MSWEP using hydrological modeling for 9011 catchments (< 50 000 km2) across the globe. Specifically, we calibrated the simple conceptual hydrological model HBV (Hydrologiska Byråns Vattenbalansavdelning) against daily Q observations with P from each of the different datasets. For the 1058 sparsely gauged catchments, representative of 83.9 % of the global land surface (excluding Antarctica), MSWEP obtained a median calibration NSE of 0.52 vs. 0.29–0.39 for the other P datasets. MSWEP is available via http://www.gloh2o.org.

scholarly journals Influence of “Realistic” Land Surface Wetness on Predictability of Seasonal Precipitation in Boreal Summer

2006 ◽  
Vol 19 (8) ◽  
pp. 1450-1460 ◽  
Author(s):  
Shinjiro Kanae ◽  
Yukiko Hirabayashi ◽  
Tomohito Yamada ◽  
Taikan Oki
Keyword(s):  
Land Surface ◽  
Seasonal Prediction ◽  
Atmospheric Model ◽  
Surface Fluxes ◽  
The Other ◽  
Boreal Summer ◽  
Seasonal Precipitation ◽  
Potential Predictability ◽  
Surface Wetness ◽  
Semiarid Regions

Abstract Outputs from two ensembles of atmospheric model simulations for 1951–98 define the influence of “realistic” land surface wetness on seasonal precipitation predictability in boreal summer. The ensembles consist of one forced with observed sea surface temperatures (SSTs) and the other forced with realistic land surface wetness as well as SSTs. Predictability was determined from correlations between the time series of simulated and observed precipitation. The ratio of forced variance to total variance determined potential predictability. Predictability occurred over some land areas adjacent to tropical oceans without land wetness forcing. On the other hand, because of the chaotic nature of the atmosphere, considerable parts of the land areas of the globe did not even show potential predictability with both land wetness and SST forcings. The use of land wetness forcing enhanced predictability over semiarid regions. Such semiarid regions are generally characterized by a negative correlation between fluxes of latent heat and sensible heat from the land surface, and are “water-regulating” areas where soil moisture plays a governing role in land–atmosphere interactions. Actual seasonal prediction may be possible in these regions if slowly varying surface conditions can be estimated in advance. In contrast, some land regions (e.g., south of the Sahel, the Amazon, and Indochina) showed little predictability despite high potential predictability. These regions are mostly characterized by a positive correlation between the surface fluxes, and are “radiation-regulating” areas where the atmosphere plays a leading role. Improvements in predictability for these regions may require further improvements in model physics.

scholarly journals Evaluating Downscaling Factors of Microwave Satellite Soil Moisture Based on Machine Learning Method

2021 ◽  
Vol 13 (1) ◽  
pp. 133
Author(s):  
Hao Sun ◽  
Yajing Cui
Keyword(s):  
Machine Learning ◽  
Soil Moisture ◽  
Land Surface ◽  
Regional Scale ◽  
Support Vector ◽  
Machine Learning Method ◽  
Learning Method ◽  
Feed Forward Neural Network ◽  
Comparative Performance ◽  
Geographical Factors

Downscaling microwave remotely sensed soil moisture (SM) is an effective way to obtain spatial continuous SM with fine resolution for hydrological and agricultural applications on a regional scale. Downscaling factors and functions are two basic components of SM downscaling where the former is particularly important in the era of big data. Based on machine learning method, this study evaluated Land Surface Temperature (LST), Land surface Evaporative Efficiency (LEE), and geographical factors from Moderate Resolution Imaging Spectroradiometer (MODIS) products for downscaling SMAP (Soil Moisture Active and Passive) SM products. This study spans from 2015 to the end of 2018 and locates in the central United States. Original SMAP SM and in-situ SM at sparse networks and core validation sites were used as reference. Experiment results indicated that (1) LEE presented comparative performance with LST as downscaling factors; (2) adding geographical factors can significantly improve the performance of SM downscaling; (3) integrating LST, LEE, and geographical factors got the best performance; (4) using Z-score normalization or hyperbolic-tangent normalization methods did not change the above conclusions, neither did using support vector regression nor feed forward neural network methods. This study demonstrates the possibility of LEE as an alternative of LST for downscaling SM when there is no available LST due to cloud contamination. It also provides experimental evidence for adding geographical factors in the downscaling process.

scholarly journals GlobSim (v1.0): deriving meteorological time series for point locations from multiple global reanalyses

2019 ◽  
Vol 12 (11) ◽  
pp. 4661-4679 ◽  
Author(s):  
Bin Cao ◽  
Xiaojing Quan ◽  
Nicholas Brown ◽  
Emilie Stewart-Jones ◽  
Stephan Gruber
Keyword(s):  
Time Series ◽  
Land Surface ◽  
Ground Surface ◽  
Reanalysis Data ◽  
Meteorological Variables ◽  
Ensemble Simulations ◽  
Driving Time ◽  
Wide Range ◽  
Global Coverage ◽  
Uncertain Input

Abstract. Simulations of land-surface processes and phenomena often require driving time series of meteorological variables. Corresponding observations, however, are unavailable in most locations, even more so, when considering the duration, continuity and data quality required. Atmospheric reanalyses provide global coverage of relevant meteorological variables, but their use is largely restricted to grid-based studies. This is because technical challenges limit the ease with which reanalysis data can be applied to models at the site scale. We present the software toolkit GlobSim, which automates the downloading, interpolation and scaling of different reanalyses – currently ERA5, ERA-Interim, JRA-55 and MERRA-2 – to produce meteorological time series for user-defined point locations. The resulting data have consistent structure and units to efficiently support ensemble simulation. The utility of GlobSim is demonstrated using an application in permafrost research. We perform ensemble simulations of ground-surface temperature for 10 terrain types in a remote tundra area in northern Canada and compare the results with observations. Simulation results reproduced seasonal cycles and variation between terrain types well, demonstrating that GlobSim can support efficient land-surface simulations. Ensemble means often yielded better accuracy than individual simulations and ensemble ranges additionally provide indications of uncertainty arising from uncertain input. By improving the usability of reanalyses for research requiring time series of climate variables for point locations, GlobSim can enable a wide range of simulation studies and model evaluations that previously were impeded by technical hurdles in obtaining suitable data.

scholarly journals Permafrost temperature and active-layer thickness of Yakutia with 0.5-degree spatial resolution for model evaluation

2013 ◽  
Vol 5 (2) ◽  
pp. 305-310 ◽  
Author(s):  
C. Beer ◽  
A. N. Fedorov ◽  
Y. Torgovkin
Keyword(s):  
Layer Thickness ◽  
Spatial Resolution ◽  
Active Layer ◽  
Land Surface ◽  
Grid Cell ◽  
Active Layer Thickness ◽  
East Siberia ◽  
Permafrost Temperature ◽  
Surface Models ◽  
The Mean

Abstract. Based on the map of landscapes and permafrost conditions in Yakutia (Merzlotno-landshaftnaya karta Yakutskoi0 ASSR, Gosgeodeziya SSSR, 1991), rasterized maps of permafrost temperature and active-layer thickness of Yakutia, East Siberia were derived. The mean and standard deviation at 0.5-degree grid cell size are estimated by assigning a probability density function at 0.001-degree spatial resolution. The gridded datasets can be accessed at the PANGAEA repository (doi:10.1594/PANGAEA.808240). Spatial pattern of both variables are dominated by a climatic gradient from north to south, and by mountains and the soil type distribution. Uncertainties are highest in mountains and in the sporadic permafrost zone in the south. The maps are best suited as a benchmark for land surface models which include a permafrost module.

A novel application of an adaptive surrogate-based modeling optimization (ASMO) for the Community Territory System Model (CTSM) in Alaska

2021 ◽  
Author(s):  
Yifan Cheng ◽  
Andrew Newman ◽  
Sean Swenson ◽  
David Lawrence ◽  
Anthony Craig ◽  
...  
Keyword(s):  
High Resolution ◽  
River Basin ◽  
Land Surface ◽  
Computational Cost ◽  
Reanalysis Data ◽  
Freshwater Ecosystems ◽  
System Model ◽  
Surface Model ◽  
Yukon River ◽  
Yukon River Basin

&lt;p&gt;Climate-induced changes in snow cover, river flow, and freshwater ecosystems will greatly affect the indigenous groups in the Alaska and Yukon River Basin. To support policy-making on climate adaptation and mitigation for these underrepresented groups, an ongoing interdisciplinary effort is being made to combine Indigenous Knowledge with western science (https://www.colorado.edu/research/arctic-rivers/).&lt;/p&gt;&lt;p&gt;A foundational component of this project is a high fidelity representation of the aforementioned land surface processes. To this end, we aim to obtain a set of reliable high-resolution parameters for the Community Territory System Model (CTSM) for the continental scale domain of Alaska and the entire Yukon River Basin, which will be used in climate change simulations. CTSM is a complex, physically based state-of-the-science land surface model that includes complex vegetation and canopy representation, a multi-layer snow model, as well as hydrology and frozen soil physics necessary for the representation of streamflow and permafrost. Two modifications to the default CTSM configuration were made. First, we used CTSM that is implemented with hillslope hydrology to better capture the fine-scale hydrologic spatial heterogeneity in complex terrain. Second, we updated the input soil textures and organic carbon in CTSM using the high-resolution SoilGrid dataset.&lt;/p&gt;&lt;p&gt;In this study, we performed a multi-objective optimization on snow and streamflow metrics using an adaptive surrogate-based modeling optimization (ASMO). ASMO permits optimization of complex land-surface models over large domains through the use of surrogate models to minimize the computational cost of running the full model for every parameter combination. We ran CTSM at a spatial resolution of 1/24&lt;sup&gt;th&lt;/sup&gt; degree and a temporal resolution of one hour using the ERA5 reanalysis data as the meteorological forcings. The ERA5 reanalysis data were bias-corrected to account for the orographic effects. We will discuss the ASMO-CTSM coupling workflow, performance characteristics of the optimization (e.g., computational cost, iterations), and comparisons of the default configuration and optimized model performance.&lt;/p&gt;

Hydrological evaluation of high-resolution precipitation estimates from the WRF model in the Third Pole river basins

2021 ◽  
Author(s):  
He Sun ◽  
Fengge Su ◽  
Zhihua He ◽  
Tinghai Ou ◽  
Deliang Chen ◽  
...  
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Hydrological Modeling ◽  
Climate Model ◽  
Regional Climate ◽  
Wrf Model ◽  
Infiltration Capacity ◽  
Flood Prediction ◽  
Daily Streamflow ◽  
Precipitation Estimates

AbstractIn this study, two sets of precipitation estimates based on the regional Weather Research and Forecasting model (WRF) –the high Asia refined analysis (HAR) and outputs with a 9 km resolution from WRF (WRF-9km) are evaluated at both basin and point scales, and their potential hydrological utilities are investigated by driving the Variable Infiltration Capacity (VIC) large-scale land surface hydrological model in seven Third Pole (TP) basins. The regional climate model (RCM) tends to overestimate the gauge-based estimates by 20–95% in annual means among the selected basins. Relative to the gauge observations, the RCM precipitation estimates can accurately detect daily precipitation events of varying intensities (with absolute bias < 3 mm). The WRF-9km exhibits a high potential for hydrological application in the monsoon-dominated basins in the southeastern TP (with NSE of 0.7–0.9 and bias of -11% to 3%), while the HAR performs well in the upper Indus (UI) and upper Brahmaputra (UB) basins (with NSE of 0.6 and bias of -15% to -9%). Both the RCM precipitation estimates can accurately capture the magnitudes of low and moderate daily streamflow, but show limited capabilities in flood prediction in most of the TP basins. This study provides a comprehensive evaluation of the strength and limitation of RCMs precipitation in hydrological modeling in the TP with complex terrains and sparse gauge observations.

scholarly journals Advantages of using a fast urban canopy model as compared to a full mesoscale model to simulate the urban heat island of Barcelona

2016 ◽  
Author(s):  
M. García-Díez ◽  
D. Lauwaet ◽  
H. Hooyberghs ◽  
J. Ballester ◽  
K. De Ridder ◽  
...  
Keyword(s):  
Simple Model ◽  
Land Surface ◽  
Climate Model ◽  
Mesoscale Model ◽  
Urban Climate ◽  
Urban Canopy ◽  
Forecast Model ◽  
Reanalysis Data ◽  
Urban Canopy Model ◽  
Canopy Model

Abstract. As most of the population lives in urban environments, the simulation of the urban climate has become a key problem in the framework of the climate change impact assessment. However, the high computational power required by these simulations is a severe limitation. Here we present a study on the performance of a Urban Climate Model (UrbClim), designed to be several orders of magnitude faster than a full-fledge mesoscale model. The simulations are validated with station data and with land surface temperature observations retrieved by satellites. To explore the advantages of using a simple model like UrbClim, the results are compared with a simulation carried out with a state-of-the-art mesoscale model, the Weather Research and Forecasting model, using an Urban Canopy model. The effect of using different driving data is explored too, by using both relatively low resolution reanalysis data (70 km) and a higher resolution forecast model (15 km). The results show that, generally, the performance of the simple model is comparable to or better than the mesoscale model. The exception are the winds and the day-to-day correlation in the reanalysis driven run, but these problems disappear when taking the boundary conditions from the higher resolution forecast model.

scholarly journals Tiling soil textures for terrestrial ecosystem modelling via clustering analysis: a case study with CLASS-CTEM (version 2.1)

2017 ◽  
Author(s):  
Joe R. Melton ◽  
Reinel Sospedra-Alfonso ◽  
Kelly E. McCusker
Keyword(s):  
Soil Texture ◽  
Land Surface ◽  
Clustering Analysis ◽  
Clustering Algorithms ◽  
Terrestrial Ecosystem ◽  
Grid Cell ◽  
Moisture Stress ◽  
Ecosystem Model ◽  
Global Scale ◽  
Terrestrial Ecosystem Model

Abstract. We investigate the application of clustering algorithms to represent sub-grid scale variability in soil texture for use in a global-scale terrestrial ecosystem model. Our model, the coupled Canadian Land Surface Scheme – Canadian Terrestrial Ecosystem Model (CLASS-CTEM), is typically implemented at a coarse spatial resolution (ca. 2.8° × 2.8°) due to its use as the land surface component of the Canadian Earth System Model (CanESM). CLASS-CTEM can, however, be run with tiling of the land surface as a means to represent sub-grid heterogeneity. We first determined that the model was sensitive to tiling of the soil textures via an idealized test case before attempting to cluster soil textures globally. To cluster a high-resolution soil texture dataset onto our coarse model grid, we use two linked algorithms (OPTICS (Ankerst et al., 1999; Daszykowski et al., 2002) and Sander et al. (2003)) to provide tiles of representative soil textures for use as CLASS-CTEM inputs. The clustering process results in, on average, about three tiles per CLASS-CTEM grid cell with most cells having four or less tiles. Results from CLASS-CTEM simulations conducted with the tiled inputs (Cluster) versus those using a simple grid-mean soil texture (Gridmean) show CLASS-CTEM, at least on a global scale, is relatively insensitive to the tiled soil textures, however differences can be large in arid or peatland regions. The Cluster simulation has generally lower soil moisture and lower overall vegetation productivity than the Gridmean simulation except in arid regions where plant productivity increases. In these dry regions, the influence of the tiling is stronger due to the general state of vegetation moisture stress which allows a single tile, whose soil texture retains more plant available water, to yield much higher productivity. Although the use of clustering analysis appears promising as a means to represent sub-grid heterogeneity, soil textures appear to be reasonably represented for global scale simulations using a simple grid-mean value.

Sign in / Sign up

Export Citation Format

Share Document