scholarly journals The immersion freezing behavior of ash particles from wood and brown coal burning

2016 ◽  
Author(s):  
Sarah Grawe ◽  
Stefanie Augustin-Bauditz ◽  
Susan Hartmann ◽  
Lisa Hellner ◽  
Jan B. C. Pettersson ◽  
...  
Keyword(s):  
Brown Coal ◽  
Coal Combustion ◽  
Regional Scale ◽  
Ice Nucleation ◽  
Freezing Behavior ◽  
Particle Generation ◽  
Coal Burning ◽  
Wood Burning ◽  
Immersion Freezing ◽  
Ice Nucleation Activity

Abstract. It is generally known that ash particles from coal combustion can trigger ice nucleation. However, data on the ice nucleation of ash particles from different sources, including both anthropogenic and natural combustion processes, is still scarce. As coal combustion still fuels the biggest proportion of electric power production worldwide and biomass burning contributes significantly to the global aerosol loading, further data is needed to better assess the ice nucleating efficiency of ash particles. In the framework of this study, we found that ash particles from brown coal (i.e., lignite) burning are more ice active than those from wood burning, with fly ash from a coal-fired power-plant being the most efficient at nucleating ice. Furthermore the effect of particle generation on the freezing behavior was studied. For this, particles were generated either by dispersion of dry sample material, or by atomization of ash-water suspensions, and then led into the Leipzig Aerosol Cloud Interaction Simulator (LACIS) where the immersion freezing behavior was examined. Whereas the immersion freezing behavior of ashes from wood burning was not affected by the particle generation method, it depended on the type of particle generation for ash from brown coal. It was also found that the common practice of treating prepared suspensions in an ultrasonic bath to avoid aggregation of particles led to an enhanced ice nucleation activity. The findings of this study suggest a) that ash from brown coal burning may influence heterogeneous ice nucleation on at least a regional scale and b) that the freezing behavior of ash particles may be altered by a change in sample preparation and/or particle generation.

scholarly journals The immersion freezing behavior of ash particles from wood and brown coal burning

2016 ◽  
Vol 16 (21) ◽  
pp. 13911-13928 ◽  
Author(s):  
Sarah Grawe ◽  
Stefanie Augustin-Bauditz ◽  
Susan Hartmann ◽  
Lisa Hellner ◽  
Jan B. C. Pettersson ◽  
...  
Keyword(s):  
Brown Coal ◽  
Ice Nucleation ◽  
Freezing Behavior ◽  
Particle Generation ◽  
Coal Burning ◽  
Wood Burning ◽  
Water Suspensions ◽  
Immersion Freezing ◽  
Combustion Processes ◽  
Ice Nucleation Activity

Abstract. It is generally known that ash particles from coal combustion can trigger ice nucleation when they interact with water vapor and/or supercooled droplets. However, data on the ice nucleation of ash particles from different sources, including both anthropogenic and natural combustion processes, are still scarce. As fossil energy sources still fuel the largest proportion of electric power production worldwide, and biomass burning contributes significantly to the global aerosol loading, further data are needed to better assess the ice nucleating efficiency of ash particles. In the framework of this study, we found that ash particles from brown coal (i.e., lignite) burning are up to 2 orders of magnitude more ice active in the immersion mode below −32 °C than those from wood burning. Fly ash from a coal-fired power plant was shown to be the most efficient at nucleating ice. Furthermore, the influence of various particle generation methods on the freezing behavior was studied. For instance, particles were generated either by dispersion of dry sample material, or by atomization of ash–water suspensions, and then led into the Leipzig Aerosol Cloud Interaction Simulator (LACIS) where the immersion freezing behavior was examined. Whereas the immersion freezing behavior of ashes from wood burning was not affected by the particle generation method, it depended on the type of particle generation for ash from brown coal. It was also found that the common practice of treating prepared suspensions in an ultrasonic bath to avoid aggregation of particles led to an enhanced ice nucleation activity. The findings of this study suggest (a) that ash from brown coal burning may influence immersion freezing in clouds close to the source and (b) that the freezing behavior of ash particles may be altered by a change in sample preparation and/or particle generation.

Acidic processing of fly ash: chemical characterization, morphology, and immersion freezing

2018 ◽  
Vol 20 (11) ◽  
pp. 1581-1592 ◽  
Author(s):  
Delanie J. Losey ◽  
Sarah K. Sihvonen ◽  
Daniel P. Veghte ◽  
Esther Chong ◽  
Miriam Arak Freedman
Keyword(s):  
Fly Ash ◽  
Coal Combustion ◽  
Chemical Characterization ◽  
Ice Nucleation ◽  
Immersion Freezing ◽  
Nucleation Activity ◽  
Ice Nucleation Activity

The ice nucleation activity of fly ash, a byproduct of coal combustion, depends on its composition.

Ice nucleation activity of iron oxides via immersion freezing and an examination of the high ice nucleation activity of FeO

2021 ◽  
Vol 23 (5) ◽  
pp. 3565-3573
Author(s):  
Esther Chong ◽  
Katherine E. Marak ◽  
Yang Li ◽  
Miriam Arak Freedman
Keyword(s):  
Iron Oxides ◽  
Functional Groups ◽  
Ice Nucleation ◽  
Mechanical Processing ◽  
Immersion Freezing ◽  
Nucleation Activity ◽  
Ice Nucleation Activity

FeO has enhanced ice nucleation activity due to functional groups that are exposed upon mechanical processing.

scholarly journals Deposition and immersion-mode nucleation of ice by three distinct samples of volcanic ash

2015 ◽  
Vol 15 (13) ◽  
pp. 7523-7536 ◽  
Author(s):  
G. P. Schill ◽  
K. Genareau ◽  
M. A. Tolbert
Keyword(s):  
Volcanic Ash ◽  
Mineral Dust ◽  
Global Climate ◽  
Volcanic Eruptions ◽  
Silica Content ◽  
Ice Nucleation ◽  
Ice Nuclei ◽  
Immersion Freezing ◽  
Nucleation Activity ◽  
Ice Nucleation Activity

Abstract. Ice nucleation of volcanic ash controls both ash aggregation and cloud glaciation, which affect atmospheric transport and global climate. Previously, it has been suggested that there is one characteristic ice nucleation efficiency for all volcanic ash, regardless of its composition, when accounting for surface area; however, this claim is derived from data from only two volcanic eruptions. In this work, we have studied the depositional and immersion freezing efficiency of three distinct samples of volcanic ash using Raman microscopy coupled to an environmental cell. Ash from the Fuego (basaltic ash, Guatemala), Soufrière Hills (andesitic ash, Montserrat), and Taupo (Oruanui eruption, rhyolitic ash, New Zealand) volcanoes were chosen to represent different geographical locations and silica content. All ash samples were quantitatively analyzed for both percent crystallinity and mineralogy using X-ray diffraction. In the present study, we find that all three samples of volcanic ash are excellent depositional ice nuclei, nucleating ice from 225 to 235 K at ice saturation ratios of 1.05 ± 0.01, comparable to the mineral dust proxy kaolinite. Since depositional ice nucleation will be more important at colder temperatures, fine volcanic ash may represent a global source of cold-cloud ice nuclei. For immersion freezing relevant to mixed-phase clouds, however, only the Oruanui ash exhibited appreciable heterogeneous ice nucleation activity. Similar to recent studies on mineral dust, we suggest that the mineralogy of volcanic ash may dictate its ice nucleation activity in the immersion mode.

scholarly journals Coal fly ash: linking immersion freezing behavior and physicochemical particle properties

2018 ◽  
Vol 18 (19) ◽  
pp. 13903-13923 ◽  
Author(s):  
Sarah Grawe ◽  
Stefanie Augustin-Bauditz ◽  
Hans-Christian Clemen ◽  
Martin Ebert ◽  
Stine Eriksen Hammer ◽  
...  
Keyword(s):  
Fly Ash ◽  
Single Particle ◽  
Coal Fly Ash ◽  
Ice Nucleation ◽  
Freezing Behavior ◽  
Cloud Droplets ◽  
X Ray ◽  
Particle Properties ◽  
Cold Stage ◽  
Immersion Freezing

Abstract. To date, only a few studies have investigated the potential of coal fly ash particles to trigger heterogeneous ice nucleation in cloud droplets. The presented measurements aim at expanding the sparse dataset and improving process understanding of how physicochemical particle properties can influence the freezing behavior of coal fly ash particles immersed in water. Firstly, immersion freezing measurements were performed with two single particle techniques, i.e., the Leipzig Aerosol Cloud Interaction Simulator (LACIS) and the SPectrometer for Ice Nuclei (SPIN). The effect of suspension time on the efficiency of the coal fly ash particles when immersed in a cloud droplet is analyzed based on the different residence times of the two instruments and employing both dry and wet particle generation. Secondly, two cold-stage setups, one using microliter sized droplets (Leipzig Ice Nucleation Array) and one using nanoliter sized droplets (WeIzmann Supercooled Droplets Observation on Microarray setup) were applied. We found that coal fly ash particles are comparable to mineral dust in their immersion freezing behavior when being dry generated. However, a significant decrease in immersion freezing efficiency was observed during experiments with wet-generated particles in LACIS and SPIN. The efficiency of wet-generated particles is in agreement with the cold-stage measurements. In order to understand the reason behind the deactivation, a series of chemical composition, morphology, and crystallography analyses (single particle mass spectrometry, scanning electron microscopy coupled with energy dispersive X-ray microanalysis, X-ray diffraction analysis) were performed with dry- and wet-generated particles. From these investigations, we conclude that anhydrous CaSO4 and CaO – which, if investigated in pure form, show the same qualitative immersion freezing behavior as observed for dry-generated coal fly ash particles – contribute to triggering heterogeneous ice nucleation at the particle–water interface. The observed deactivation in contact with water is related to changes in the particle surface properties which are potentially caused by hydration of CaSO4 and CaO. The contribution of coal fly ash to the ambient population of ice-nucleating particles therefore depends on whether and for how long particles are immersed in cloud droplets.

scholarly journals Ice nucleation properties of K-feldspar polymorphs and plagioclase feldspars

2019 ◽  
Author(s):  
André Welti ◽  
Ulrike Lohmann ◽  
Zamin A. Kanji
Keyword(s):  
Trace Elements ◽  
Elemental Composition ◽  
Ice Nucleation ◽  
Cloud Properties ◽  
Ability To Act ◽  
Mineralogical Characteristics ◽  
Trace Elemental ◽  
Mineral Dusts ◽  
Immersion Freezing ◽  
Ice Nucleation Activity

Abstract. The relation between the mineralogical characteristics of size selected feldspar particles from 50–800 nm and their ability to act as ice nucleating particles (INPs) in the immersion mode is presented. Five polymorph members of K-feldspar (two microclines, orthoclase, adularia and sanidine) and four Na/Ca- rich feldspar samples (three labradorites and a pericline sample) are tested. Microcline was found to be the most active INP in the immersion mode consistent with previous findings. Samples are selected for their differences in typical feldspar properties such as crystal structure, bulk and trace elemental composition and ordering of the crystal lattice. The mentioned properties are related to the temperature of feldspar crystallization from the melt rocks during formation. Properties characteristic for low temperature feldspar formation coincide with an increased ability to nucleate ice. Ice nucleation is most efficient on the crystallographic ordered, triclinic K-feldspar species microcline, while the intermediate and disordered, monoclinic K-feldspar polymorphs orthoclase and sanidine nucleate ice at lower temperatures. The ice nucleation ability of disordered, triclinic Na/Ca-feldspar is comparable to disordered K-feldspar. The conditions of feldspar rock formation also leave a chemical fingerprint with varying abundance of trace elements in the samples. X-ray fluorescence spectroscopy analysis to determine metal oxide and trace elemental composition of the feldspar samples revealed a correlation with median freezing temperatures (T50) of the K-feldspar samples allowing to sort them for their ice nucleation efficiency according to the abundance of specific trace elements. A pronounced size dependence of ice nucleation activity for the feldspar samples is observed, which also depends on mineralogical characteristics. In particular, microcline exhibited immersion freezing even for 50 nm particles which is unique for heterogeneous ice nucleation of mineral dusts. This suggests that small microcline particles that are susceptible to long-range transport can affect cloud properties via immersion freezing far away from the source. The measurements generally imply that temperatures at which feldspars can affect cloud glaciation depends on the transported particle size.

Influence of organic and biogenic substances on the ice nucleation properties of mineral dust particles

2020 ◽  
Author(s):  
Kristian Klumpp ◽  
Claudia Marcolli ◽  
Thomas Peter
Keyword(s):  
Amino Acids ◽  
Organic Acids ◽  
Mineral Dust ◽  
Particle Surface ◽  
Ice Nucleation ◽  
Dust Particles ◽  
Biogenic Substances ◽  
Immersion Freezing ◽  
Mixed Phase Clouds ◽  
Ice Nucleation Activity

<p>The formation of ice in mixed phase clouds occurs in the presence of aerosol particles with the ability to nucleate ice on their surface. These ice-nucleating particles (INPs) represent usually a small fraction of particles in an atmospheric aerosol. One of the main particle types which act as INPs are mineral dust particles. Among other factors, the accumulation of semivolatile substances on the particle surface can alter the ice nucleation properties of such particles.</p><p>In recent immersion freezing experiments, we investigated the influence of organic acids, amino acids and polyols on the highly ice nucleation active K-feldspar microcline. Microcline dust was suspended in solutions of the above-mentioned substances and frozen in a differential scanning calorimeter (DSC). These experiments give us insight into the ice nucleation characteristics of the particles in the presence of the tested organic and biogenic substances. Our measurements show an overall decrease in ice nucleation activity of microcline in the presence of organic acids and amino acids. <br><br></p>

scholarly journals The contribution of fungal spores and bacteria to regional and global aerosol number and ice nucleation immersion freezing rates

2013 ◽  
Vol 13 (12) ◽  
pp. 32459-32481 ◽  
Author(s):  
D. V. Spracklen ◽  
C. L. Heald
Keyword(s):  
Cloud Condensation Nuclei ◽  
Fungal Spores ◽  
Ice Nucleation ◽  
Model Studies ◽  
Modelling Studies ◽  
Climate Interactions ◽  
Immersion Freezing ◽  
Simulated Surface ◽  
Mixed Phase Clouds ◽  
Ice Nucleation Activity

Abstract. Primary biological aerosol particles (PBAP) may play an important role in aerosol–climate interactions, in particular through affecting ice formation in mixed phase clouds. However, the role of PBAP is poorly understood because the sources and distribution of PBAP in the atmosphere are not well quantified. Here we include emissions of fungal spores and bacteria in a global aerosol microphysics model and explore their contribution to concentrations of supermicron particle number, cloud condensation nuclei (CCN) and immersion freezing rates. Simulated surface annual mean concentrations of fungal spores are ~2.5 × 104 m−3 over continental midlatiudes and 1 × 105 m−3 over tropical forests. Simulated surface concentrations of bacteria are 2.5 × 104 m−3 over most continental regions and 5 × 104 m−3 over grasslands of central Asia and North America. These simulated surface number concentrations of fungal spores and bacteria are broadly in agreement with the limited available observations. We find that fungal spores and bacteria contribute 8% and 5% respectively to simulated continental surface mean supermicron number concentrations, but have very limited impact on CCN concentrations, altering regional concentrations by less than 1%. In agreement with previous global modelling studies we find that fungal spores and bacteria contribute very little (3 × 10−3 % even when we assume upper limits for ice nucleation activity) to global average immersion freezing ice nucleation rates, which are dominated by soot and dust. However, at lower altitudes (400 hPa to 600 hPa), where warmer temperatures mean that soot and dust may not nucleate ice, we find that PBAP controls the immersion freezing ice nucleation rate. This demonstrates that PBAP can be of regional importance for IN formation, in agreement with case study observations but in contrast to recent global model studies that have concluded PBAP are unimportant as ice nuclei.

scholarly journals Ice nucleation properties of K-feldspar polymorphs and plagioclase feldspars

2019 ◽  
Vol 19 (16) ◽  
pp. 10901-10918 ◽  
Author(s):  
André Welti ◽  
Ulrike Lohmann ◽  
Zamin A. Kanji
Keyword(s):  
Trace Elements ◽  
Elemental Composition ◽  
Size Dependence ◽  
Ice Nucleation ◽  
Cloud Properties ◽  
Ability To Act ◽  
Metal Abundance ◽  
Trace Elemental ◽  
Immersion Freezing ◽  
Ice Nucleation Activity

Abstract. The relation between the mineralogical characteristics of size-selected feldspar particles from 50 to 800 nm and their ability to act as ice-nucleating particles (INPs) in the immersion mode is presented. Five polymorph members of K-feldspar (two microclines, orthoclase, adularia and sanidine) and four plagioclase samples (three labradorites and a pericline sample) are tested. Microcline was found to be the most active INP in the immersion mode consistent with previous findings. Samples were selected for their differences in typical feldspar properties such as crystal structure, bulk and trace elemental composition, and ordering of the crystal lattice. The properties mentioned are related to the temperature of feldspar crystallization from the magma during formation. Properties characteristic of low-temperature feldspar formation coincide with an increased ability to nucleate ice. Amongst the samples investigated, ice nucleation is most efficient on the crystallographically ordered, triclinic K-feldspar species microcline, while the intermediate and disordered monoclinic K-feldspar polymorphs orthoclase and sanidine nucleate ice at lower temperatures. The ice nucleation ability of disordered triclinic Na∕Ca-feldspar is comparable to disordered K-feldspar. The conditions of feldspar rock formation also leave a chemical fingerprint with varying abundance of trace elements in the samples. X-ray fluorescence spectroscopy analysis was conducted to determine metal oxide and trace elemental composition of the feldspar samples. The analysis revealed a correlation of trace metal abundance with median freezing temperatures (T50) of the K-feldspar samples allowing us to sort them for their ice nucleation efficiency according to the abundance of specific trace elements. A pronounced size dependence of ice nucleation activity for the feldspar samples is observed, with the activity of smaller-sized particles scaling with surface area or being even higher compared to larger particles. The size dependence varies for different feldspar samples. In particular, microcline exhibited immersion freezing even for 50 nm particles which is unique for heterogeneous ice nucleation of mineral dusts. This suggests that small microcline particles that are susceptible to long-range transport can affect cloud properties via immersion freezing far away from the source. The measurements generally imply that temperatures at which feldspars can affect cloud glaciation depend on the transported particle size in addition to the abundance of these particles.

Sign in / Sign up

Export Citation Format

Share Document